This part helps your gas oven heat up by lighting the burner. If it’s glowing but not lighting the flame, it’s probably time for a replacement. It’s a flat-style igniter with a ceramic base and comes with a connector for easy setup. Be sure to unplug your oven and turn off the gas before installing.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Will Not Start | Little to no heat when baking
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Cindy S - March 26, 2023
Verified Purchase
Easy repair.
This part was easy to replace and my stove is working great!
★★★★★
★★★★★
Sherry M - June 11, 2021
Verified Purchase
Easy Repair and the part was the exact match!
Was so pleased with this company for its great list of stock items and how easy and fast we received our order . Hats off to you and your staff !! We will definitely be a repeat customer and proud to share your company with all our family and friends :) Stay safe !!
★★★★★
★★★★★
Erin H - April 23, 2019
Verified Purchase
Great part
The part came a lot faster then I expected. It was a substitute part number so I was worried it was the same but it was. Very happy
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 34 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
our oven would not heat up
My husband pulled out the stove turned the gas off then he pulled out the part and replaced igniter....it took only about 20 min to do this job it was very easy and prior to us doing ourselves i called a well known company that does home repairs, I also called a few smaller businesses and to replace this part was anywhere from $175- 250 if not more. we are very very happy with our decision to replace the part ourselves unstead of spending extra money we didnt have .
Other Parts Used:
sharnette from baltimore, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
92 of 108 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The igniter would turn orange but wouldn't fire up, so the oven wouldn't heat up.
I just unscrewed the old one out, which was 2 screws and screwed this one in. But the thing that was best of all was how fast the part came in. It literally came the next day.
Other Parts Used:
Lisa from Livermore, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
28 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The (relatively new) gas oven would not light...oddly enough after a power outage. The recommended typical troubleshooting experience was that if the oven will not light: replace the igniter, even if it appears to be working fine.
I had already removed the 2 plates in the bottom of the oven to take an initial look. After not finding anything obvious, and searching on line for advice, I ordered the igniter. After the igniter arrived it was a matter of removing 2 screws, pulling out the lower drawer to gain access to the igniter disconnect, and done.
thanks for getting the correct part to me so quickly. Also the diagram and part number search was right on the money!
Other Parts Used:
Robert from Sun City, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
26 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat.
Installing the part was really easy. I first turned the gas off, simply remove two screws tht hold the igniter in place. I then remove four screws from the back panel and disconnected the part. The feedback from other users on your site made me realize how easy it was. It took less than thirty minutes.
Other Parts Used:
Nedra from Alsip, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
26 of 30 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat in the Broiler/oven.
Removed the panels, disconnected and dismounted the igniter and installed the new one. Pretty simple.
Other Parts Used:
Matthew from Reno, NV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
17 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat
Amazing after two years off frustration due to unsurety of problem went to your site found part problem in question that matched my problem.two screws and a plug now im burning like im supposed to.success
Other Parts Used:
sean from san bernardino, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
14 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter glowed but oven would not light
We looked up the trouble shooting page on PartsSelect and ordered the part recommended. Part arrived very quickly. Simple installation, two screws and plug in. Problem fixed.
Other Parts Used:
Kenneth from Garden Valley, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
12 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas Oven, started to Preheat then quit. Then would not even light
It is very simple to do. We called a repair man we normally use, but he does not do gas appliances. So started to research. I removed the bottom drawer, looked at the connection on the wires hanging down. Opened the oven removed the racks. On the bottom plate, loosened two screws and slid the bottom toward the front and removed it. Then removed two philips screws and removed the heat deflection plate, it slides forward and pulled up from the back. Then there it was- the igniter. I looked at it then looked at the connection behind the drawer. Went to PartSelect.com, found the part using the model number and used the parts diagram found the igniter and the picture matched what I had. I ordered the part, placed all parts back in place until part arrived. After part arrived, shut off breaker to oven removed all parts again disconnected the wire connection behind the drawer. Then on the side of the igniter, I used a nut driver, removed two bolts and took out the igniter. Matched it to the new one, including the power connection. Placed new one in and reversed the order. Turned on breaker, Pre Heated oven, been in service since. Ordered part before 3 on Wed, received early on Friday. Stopped home during lunch Friday and put it in place. 15 minutes and DONE Oven worked and fresh baked cookies when I got home! Thanks PartSelect.com!
Other Parts Used:
John from West Grove, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ignitor would glow but not power gas valve
New ignitor fixed the problem
Other Parts Used:
Jacquelyn from Billerica, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
11 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had to replace ignitor
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Replacing it was just as simple,only in reverse. The only tip I have that I should mention,is to UNPLUG the appliance first,as 110volts tingle your fingers!
Other Parts Used:
Ron from Marthasville, MO
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
19 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary
April 4, 2018
Preheated the oven and after 30 minutes the temp did not change on the display i opened the oven and it was still cold, not warm at all. I cancelled everything and tried again but it didn't work. Which part do you think is best for me? Thank you
For model number wfg505m0bw0
Hi Mary,
Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Rene
January 13, 2018
Is the part that I am going to order going to fit my model? I had ordered an oven igniter from a different company, and the one they sent was not the one they had in the picture. It did not come with the plug in adapter. I just want to make sure before I order it, thanks
For model number SF315PEPQ1
Hello Rene, Thank you for the question. Yes, the PS11770066 is the correct igniter for the model number provided. This flat style gas oven igniter has ceramic housing and comes with a connector. Good luck with the repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Tony F Napolitano
September 29, 2017
Just received part igntor-oven. Took the old part off, but the plug goes in back of the panel. How do i get to the plugin
For model number SF315PEMW1
Hi Tony,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the oven igniter. You will find the video under part number PS1573892. I hope this helps. Thank you and have a great day!
Does this part glow the whole time the oven is being used?
For model number WFG320M0BS0
Hello Gefro, Thank you for the question.The oven igniter will stay on continuously while the burner is operating. The igniter will turn off once the oven reaches the set temperature and then it will come back on and stay on again when needed to ignite the burner to maintain the oven set temperature. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Raymond
September 30, 2019
My oven will not lite. It seems as if its not getting any gas from the gas line. The igniter glows very bright though. What should I check first?
For model number FGP305KW2
Hello Raymond, Thank you for the question. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. They can glow but not be strong enough to open the valve. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mari
June 4, 2019
The oven igniter was replaced by local technician. Oven lights only at 350-375 and then turns off when oven reaches that temperature. If i turn the oven control to a lower temperature, it goes out. I cannot cook that way. What needs to be done?
For model number AGG222VDW1
Hi Mari,
Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lisa
November 17, 2019
My oven won’t heat up and we smell gas. Would this be the igniter
For model number SF114PXSW2
Good Day Lisa. Thank you for your question in regards to your unit (Model Number SF114PXSW2). The following link will bring you to a list of parts that you may need to replace in order to solve the problem that you are having: https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=SF114PXSW2&mfgModelNum=&fkMfgID=3&ModelMasterID=114427&PID=51. Hope this helps. Best Regards.
Was this helpful?
Thank you for voting!
Brittany
August 10, 2021
My Whirlpool gas stove burners work and light but when turning on the oven it lights but doesn't heat properly the temp does not change but when opening the oven it has little to no heat not enough to cook. What could the problem be?
For model number WFG320M0BW
Hello Brittany, Thank you for the question. We suggest testing the Oven Sensor. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!
Try to start oven, nothing. Igniter does not glow. Igniter or temp sensor?
For model number WFG320M0BB
Hello John, Thank you for the question. We suggest testing the Igniter. On a good igniter, there should be between 40 & 400 OHMS. A bad igniter will show no resistance or continuity. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Scott
April 25, 2022
I need oven igniter for WFG320M0BS
For model number WFG320M0BS
Hello Scott, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11770066. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
