CNTRL-ELEC
Fits your MDB8959SFZ4!
$356.21
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your MDB8959SFZ4!
PartSelect Number
PS11769634
Manufacturer Part Number
W10906431
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag.
Part# W10906431 replaces these:
W10838695, W10892799
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cory
November 2, 2021
Control board doesn't light up and buttons do nothing. After unplugging dishwasher, it ran a drain cycle but still no power to the control board?
For model number MDB8959SFZ4
Hello Cory, Thank you for the question. This normally indicates the Control Board is defective and will need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ken
September 3, 2021
Dishwasher programs, starts, and fills. Wash begins but 3 or 4 minutes later it cancels the cycle and goes into a 2 minute drain. Suspect the control. Any input would be appreciated. Thanks, Ken
For model number MDB8959SFZ4
Hello Ken, Thank you for the question. This is normally an indication the appliance is not processing the cycles properly and the User Control and Display Board would need to be replaced. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Thomas
December 7, 2022
Hello, my dishwasher indicate F2E2 error code. Is the control board defective ?
For model number MDB8959SFH4
Hello Thomas, thank you for reaching out. The F2 E2 error code indicates that the user interface is unable to communicate with the electronic control board. We suggest that you check the user interface board, part number PS11769413, and the control board, part number PS11769634. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Was this helpful?
Thank you for voting!
Related Parts:
Garry
March 28, 2023
can not get the start button to connect. it has pressed down too far
For model number MDB8959SFZ4
Hi Garry, thank you for contacting us. You may need to replace the start button, part number PS10062460. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11769634
Manufacturer Part Number: W10906431
Manufacturer Part Number: W10906431
Brand
Model Number
Description