Part Location Diagram of W10871196 Whirlpool Kickplate - Black
See part 8 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Kickplate - Black

★★★★★
★★★★★
2 Reviews
$123.94
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11769017
Manufacturer Part Number W10871196
Manufactured by Whirlpool
Product Description

Kickplate - Black Specifications

New Black Single Metal Access Panel Replacement Kit. Replaces old two part toe kick plates. Reuse insulation off old panel or see Recommended Parts.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, KitchenAid, Whirlpool, Maytag.
Part# W10871196 replaces these:
8268999, 8269003, 8270026, 8558252, 8573286, W10177629, W10205336, W10586590, W10737729, W10780487, W10799405, W10827633, W11024697, WP8573286, WPW10205336, WPW10586590
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
1.5
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    1
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 5 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Wanted to change beige dishwasher front to black.
First , I went outside and turned the breaker for the dishwasher off. Next,I removed the screws that held the bottom 2 pieces, that rest on the floo,r in place. Then removed the two beige metal pcs. . Next I replaced them with the 2 black pieces I had ordered and secured them with the 2 black screws I had received as part of my order. Then I removed the scews from the inside of the door of my KitchenAid Dishwasher. This released both the front bottom panel and the control panel. . I took the beige bottom door panel off and moved the insulation piece from the back of thebeige panel to the back of the black panel. Then I intalled the new black panel I ordered and resecured it with two screws until I had finished with the control panel switch out.
I had to unplug an electronic tape from the inside of the beige control panel and plug the same tape back into the black control panel. I also had to remove the beige handle that was on the inside of the control panel, attached to the door, and replace it with the new black one I'd received. I then installed the black control panel and reattached it with screws and finished replacing the rest of the screws I had removed from the inside of the door.
I tested the handle to make sure it opened the door and locked it like it should and then went outside and turned the breaker back on. Came in and turned on the dishwasher and did a load of dishes. It looks awesome, matches the rest of my black appliances and I am very proud to have done it myself. I also wanted to thank the customer service lady who was so great to work with on the phone. I would shop with you again.
Other Parts Used:
Front Panel - Black ACCESS PANEL (BLACK) Control Panel Assembly - Black Door Handle Screw - 8-18 x 1/2
  • Margaret from San Diego, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
13 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
change color to black
Pulled toe panel and then electrical panels and handle and then front panel. It was a white appliance and i changed it to black. The people at part select was very helpful and friendly. I would do business with them in the future.
Other Parts Used:
Exterior Door Panel - Black Touchpad Control Panel - Black Door Handle
  • Marlon from Conroe, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problems
Removed the old panels with a phillips screwdriver. Removed the control panel and put the door latch and the control board into the new control panel the same way they were in the old one. Also have instructions to follow if needed. Replaced the front panel and put the screws back in. The toe and access panels went in easy, the only thing we had to do was touch up those screw with black paint as there were not new black screws in the kit. It was an easy and simple process.
Other Parts Used:
ACCESS PANEL (BLACK) Exterior Door Panel - Stainless Control Panel with Touchpad - Black
  • Pam from Plainview, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
10 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Merely switching from Bisque to Stainless Steel
Removed the toe panel and replaced.
Removed the front panel and replaced.
Removed the control panel, disconnected the ribbon wiring and replaced with the new control panel. Reconnected the ribbon wiring and secured the panel with the six screws..
Other Parts Used:
PANEL-CNTL ACCESS PANEL (BLACK) HANDLE Exterior Door Panel - Stainless Steel
  • Daniel from Germantown, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
4 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plate was missing at the time we purchased the house.
It was ok but screw holes were not in the right spot but we put one in and that is sufficient for now. It prevent thing from follow under it.
Other Parts Used:
Clip Screw - 8-18 x 1/2
  • Barbara from NEWPORT NEWS, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jane
August 11, 2022
My contractor threw out the insulation and kick plate to my Maytag dishwasher. Can I order the insulation with the plate and if it doesn’t fit can it be returned
For model number MDB4949SDM3
PartSelect logo
Hello Jane, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12348217 for the Toe Panel Insulation. Please see the link attached for the return policy. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
  • 1
;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11769017
Manufacturer Part Number: W10871196
Brand
Model Number
Description
Kenmore
665110739120
Dishwasher
Kenmore
665110739130
Dishwasher
Kenmore
665110739140
Dishwasher
Kenmore
665110739190
Dishwasher
Kenmore
66512782K310
Dishwasher - Kenmore Dishwasher Model 665.12782K310 (66512782K310, 665 12782K310) Parts
Kenmore
66512782K311
Dishwasher - Kenmore Dishwasher Model 665.12782K311 (66512782K311, 665 12782K311) Parts
Kenmore
66512782K312
Dishwasher - Dishwasher
Kenmore
66512782K313
Dishwasher - Dishwasher
Kenmore
66512783K311
Dishwasher - Kenmore Dishwasher Model 665.12783K311 (66512783K311, 665 12783K311) Parts
Kenmore
66512783K312
Dishwasher - Dishwasher
Kenmore
66512783K313
Dishwasher - Dishwasher
Kenmore
66512789K311
Dishwasher - Kenmore Dishwasher Model 665.12789K311 (66512789K311, 665 12789K311) Parts
Kenmore
66512789K312
Dishwasher - Dishwasher
Kenmore
66512789K313
Dishwasher - Dishwasher
Kenmore
66512793K311
Dishwasher - Kenmore Dishwasher Model 665.12793K311 (66512793K311, 665 12793K311) Parts
Kenmore
66512803K311
Dishwasher - Kenmore Dishwasher Model 665.12803K311 (66512803K311, 665 12803K311) Parts
Kenmore
66512833K311
Dishwasher - Kenmore Dishwasher Model 665.12833K311 (66512833K311, 665 12833K311) Parts
Kenmore
66513012K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513012K111
Dishwasher
Kenmore
66513013K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513013K111
Dishwasher
Kenmore
66513014K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513014K111
Dishwasher
Kenmore
66513019K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513019K111
Dishwasher
Kenmore
66513023K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513023K111
Dishwasher
Kenmore
66513032K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513032K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513033K110
Dishwasher - UNDERCOUNTER DISHWASHER
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service