SEAL-DOOR
$100.44
On Order
PartSelect Number
PS11766744
Manufacturer Part Number
W10906683
Manufactured by
Whirlpool
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Dryer.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Crosley.
Part# W10906683 replaces these:
AP6034191, 3390731, 692494, W10389571, W10823580, WP3390731, WPW10389571
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
seal came of dryer door
romoved from pkg. and fit it to the door. no tools needed. best of all the part came in 24 hrs and was fixed with out delay of waiting from a store that was out of our area. great costumer service!!!!!
Other Parts Used:
-
alice from wickliffe, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
8 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Belt had slipped off idler pulley.
Opened top panel in order to remove the front panel. Removed belt and removed drum seal. Replaced drum seal and belt.
Other Parts Used:
-
John from East Rockway, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kristin
September 13, 2017
Hello! Do we need to glue the new door seal for installation? We pulled the old one out and it looks like it was glued in. If so, what type of glue should we use? Thanks!
For model number w10906683
Hello Kristin, thank you for contacting us. Yes, there is high temperature adhesive that you would need to use to install the door seal. Part number PS11757492 Good luck with the repair!
20 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
William
December 7, 2022
Hello, is there a guide on how to properly remove old door seal and apply adhesive-attach new seal?
thank you
For model number 110.65132411
Hello William, thank you for contacting us. We have attached a relevant video link to assist you with the door seal replacement with adhesive:
https://www.youtube.com/watch?v=M9RFS2QGnT8
We hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Jonathan
December 26, 2019
Is this door seal a metallic mesh style?
For model number WED49STBW1
Hello Jonathan, thank you for your inquiry. Yes, we can confirm that door seal PS11766744 is a metallic mesh style seal. I hope this information helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Russ
November 10, 2022
Does the adhesive come with the door seal?
For model number Wgd5000dw3
Hello Russ, thank you for contacting us. The door seal you mentioned does not come with the adhesive. However, the rear drum felt seal, part number PS8691753, includes adhesive. You can also order the adhesive, part number PS11757492, separately. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Thomas
September 3, 2021
How do I get the old off and install the new one
For model number WED5000DW2
Hello Thomas, Thank you for the question. To remove the old Seal you just peel it off the panel. Clean any left over glue residue and then glue the new Seal in place. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Dan
September 6, 2021
What adhesive works with this heat seal?
For model number WGD5000DW3
Hello Dan, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11757492. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Martha
June 19, 2023
I am having a lot of lent around outside of seal. Could a dry or defective seal cause that it is that a model deficiency
For model number Wed49stbw1
Hi Martha, thank you for reaching out. According to our research, a dried or worn-out lint trap housing seal, part number PS11741506, might not catch the lint effectively. If this problem keeps repeating, we would suggest replacing the seal. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11766744
Manufacturer Part Number: W10906683
Manufacturer Part Number: W10906683
Brand
Model Number
Description