Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
RICHARD L - February 23, 2023
Verified Purchase
part was accurate and worked perfect
the only issue was it took 7 buisness days to arrive
★★★★★
★★★★★
Edward D - February 4, 2023
Verified Purchase
Oven temp sensor replacement
Everything went well. Part arrived in short order. I replaced the part and the appliance is now working as advertised. All good.
★★★★★
★★★★★
Rick R - January 13, 2022
Verified Purchase
Easy Repair
The part arrived quickly, it was the right one and we were able to change it out very easily. Thanks very much Part Select!
★★★★★
★★★★★
Morley F - November 27, 2021
Verified Purchase
Perfect fit and working fine
Perfect fit and working fine
★★★★★
★★★★★
Pete S - July 13, 2021
Verified Purchase
Easy repair and corrected the problem
Diagnostics indicated that the likely cause of an over temp. on my Frigidaire range was the temperature probe. Part received was exact match to the original, easy install and problem corrected.
★★★★★
★★★★★
Bryce M - March 30, 2021
Verified Purchase
Easy install
Easy to install
★★★★★
★★★★★
Alex L - March 9, 2021
Verified Purchase
TEMPERATURE SENSOR
The part worked and shipping was next day but it did not fix my problem as the temperature in my oven is still dropping after its pre heated. I think it's the control board
★★★★★
★★★★★
Yves L - March 2, 2021
Verified Purchase
Great part
Show up in time great replacement part fit good really happy
★★★★★
★★★★★
Lee W - November 20, 2019
Verified Purchase
simple to order, easy to install, took minutes
Just like the title says!
★★★★★
★★★★★
Bonita M - September 13, 2019
Verified Purchase
IT WORKED!!!
Arrived safely and was easy to install and it worked!!! Great company, easy to order, very efficient company thanks!
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Top oven overheating
Have a double wall oven and the top oven would not shut off or broiler part would stay on and burn tops of food. Since bottom oven was not having any issues felt like it could Not be control panel so decided to try the temp sensor. Since replacing oven has worked properly.
Other Parts Used:
Ronald from NEVADA, MO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both oven bake and broil elements lost power suddenly at the same time.
Installation of the temparature sensor, one of the technician recommended parts took no time, just two screws and a snap off/snap on part. It did not fix the problem. I then replaced the main control panel, which requires more work, but didn't solce the ussue either. I then replaced the thermal fuse, which wasn't mentioned by tech support, and required much more disassebly of the top panels of the stove, with still no fix to the problem. I am waiting to replace the thermostat heat sensor unit, the only other part in the circuit controlling power supply, requiring removal of the stove top again,
Other Parts Used:
Alexander from DELMAR, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
7 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
sensor should pull into oven enough to easily unsnap and snap but didn't pull out
on the back side of the wall oven the sensor wire was ziptied tight. we had to totally pull oven out of its wall space, remove back panel, unhook zip tie, feed through sensor hole around insulation, connect and then replace back and return and relevel the oven. I have
Other Parts Used:
Mary from EDGAR, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
January 17, 2024
I bought a new temperature probe for the top oven, part #5304525427 and still didn’t fix error code F30. Check ohms on new probe at 500ohm where existing probe in bottom oven reads 1000ohm. Bottom oven works fine. Took probe out of bottom oven and installed in top oven and error code F30 cleared and top oven works fine. Tried new probe in bottom oven and got error code F31. Why do these new probes #5304525427 not work? Found original probe part #318562500 is no longer available. What’s a person to do?
For model number FGEF306TPFA
Hello Joe, thank you for your inquiry. Based on the description that you have provided, we would recommend replacing the relay control board, part number PS10064722, to fix the issue. It receives signals from the main oven control board. The relay control board operates relays to regulate the oven elements. We hope this helps!