Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bjorn P - January 8, 2024
Verified Purchase
Easy. Great. Worked as expected.
Relatively speedy service. The part was new and fit perfectly. It's been installed for a month and no leaking/condensation build up. Very happy.
★★★★★
★★★★★
Frank R - August 3, 2022
Verified Purchase
Perfect Fit
exactly what my freezer was crying for. Fit perfectly and shipped quickly. Thanks again.
★★★★★
★★★★★
Sidney S - February 16, 2019
Verified Purchase
Just what I had hoped for.
Just the part I needed. Arrived in awesome time. A bit pricey though.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice buildup around freezer door gasket
Replaced with new gasket
Other Parts Used:
Joseph from JACKSONVILLE, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
16 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer gasket worn out and slightly torn on top.
I pulled the ils gasket out of track and replaced with the new one. Instructions ncluded state to be very careful with new gasket as the magnets may break. Total time 2 minutes with no tools required.
Other Parts Used:
William from PRATTVILLE, AL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
FROST, ICE buildup along and inside the bottom of freezer and door
Removed old gasket by carefully pulling it out of the retaining groove. Installed the new gasket starting the corners first and then seating the upper and lower straight portion gently in the retainer groove. Total time for installation was at most 5 minutes. After a week no ice or frost has been found along the bottom of door or freezer. Note: the new gasket came in a small box for shipping purposes and the new gasket was twisted in a v for this purpose. Upon arrival, I laid it out flat on table overnight so it could cool to room temperature and straighten. I would recomend this procedure for a perfect installation.
Other Parts Used:
Jerry from SNELLVILLE, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer door leaking on floor.
Open and remove door by loosening two screws on both sides of the door. Lift up and away the door.place the door on flat surface, grab and lift up on seal pulling out of reach. Clean track, alone seal on food before pressing in place. Check to make sure seal is set in place. Install door job done.
Other Parts Used:
Jerome from Goldsboro, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gasket was old and air leaking into freezer !
Took off old one and just replaced new, very easy and corrected problems!
Other Parts Used:
William from CAPE CORAL, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JD
April 29, 2018
We have a tear in the top pf our freezer gasket (this part is gross) and we are having tiny flies coming out of there. How difficult is it to replace the gasket - unfortunately i'm not the handiest person. Is this the right thing to purchase to replace?
For model number GI7FVCXXY00
Hi JD,
Thank you for your question. Yes, this would be the correct gasket to replace. There is a video on our website that you can reference on how to install the freezer door gasket. The refrigerator in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS1991435. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Brooklyn
February 19, 2018
What are the part numbers for door gasket on both refrigerator and freezer of this model??? if i order the door gasket is it for both doors ?
For model number GI5FSAXVY04
Hello Brooklyn, thank you for your question. The fridge door gaskets are the same part, Door Gasket - Apollo Gray Part Number: PS3653185, the freezer door gasket is Freezer Door Gasket - Apollo Gray
Part Number: PS11757265. If you needed BOTH fridge door gaskets, you would have to order 2 of that part number. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
December 27, 2017
I have a white refrigerator, the freezer door seals says it is apollo gray, will it work?
For model number MF I2569VEW1
Hi Ron,
Thank you for your question. There is a white refrigerator door gasket listed under your model number.
The part number for it is PS11754791. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Linda
March 14, 2022
I need to replace the left and right door seals, as well as the freezer drawer seal. Which part numbers do I need to order? (the refrigerator is stainless steel color)
For model number MFX2570AEM0
Hi Linda,
Thank you for your question. The part number listed under your model number for the left and right door gasket is PS11759518. They are sold individually. The part number listed for the freezer door gasket is PS11757265. If you need help placing an order for them, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
How does this new gasket attach to the door?
Our freezer is leaking water. bottom covered in thick sheet of ice, freezer light won't work, and when it is leaking water you can hear a sizzle in the back..tried thawing it once with heat gun. ice came back quickly.
would a new gasket help with this?
For model number MFI2665XEM7 Maytag Refrigerator
Hello Lena, thank you for getting in touch. Based on our research, you may need to replace the door gasket, part number PS11757265. The light would not work if the socket or bulb itself is faulty. You may need to replace the bulb, part number PS971228. If that does not help, we recommend replacing the socket, part number PS12749532. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
What are the dimensions/measurement of this gasket?
For model number GI6FDRXXY07
Hello Bob, Thank you for the question. Very sorry, the manufacturer does not list the size of this gasket. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11757265. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Kim
October 21, 2019
Why is dripping water going down the side of the ice machine door so when you open the door to get ice out there is ice buildup on the bottom of the ice bucket. Have to keep cleaning it off. I did notice on the gasket of the ice machine there was a chip of ice stuck there.....thanks
For model number WRF736sdam11
Hello Kim and thanks for writing.
Sounds like you have a water leak that will freeze and build up the ice. It is possible that the stuck ice cube might have caused this, So give it a try now that the ice cube is gone.
If it still persist, in 72% it is a problem with the water tube connection #PS11740187, followed by the Primary water inlet valve # 12002355 in 14 % of the time then the Reservoir # PS12348075in 13 % of the cases. Please check those parts for damage and replace them if needed. We hope this helps. Please contact us anytime.
Good Luck with your repair.
