Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Door latch failure | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool.
Part# WPW10671905 replaces these:
AP6023708
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Colin T - April 28, 2022
Verified Purchase
Easy Install fit was great
The part was in great condition. No issues!
Linda K - November 5, 2018
Verified Purchase
Easy repair. Fast delivery!
The part shipped super fast! It was here in a couple of days and in excellent shape. I was able to replace the part without having to hire a repairman.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Soap Dispenser door is broken
Open door and remove 12 T15 torx screws. Note that the 4 along the top edge are longer than the 8 along the sides. Lift the door panel upwards to remove the panel. Remove 6 screws securing the soap dispenser and metal bracket. Unplug the cable on the right side by pressing down on the locking tab. Note the position of the black plastic sheet that covers the back of the dispenser, and the white insulator on the right side. open the door part way and press down on the release for the dispenser on the outside of the door. The dispenser can now be removed from the inside of the door. Install the new dispenser and snap in place. Put the metal bracket back in place with the insulators and secure with the 6 screws. Re-install the shorter screws first, then the longer ones across the top.
Other Parts Used:
-
Gloria from OCEAN CITY, NJ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Soap not dispensing, and Water not spraying
I watched the videos and did the repair , very simple, replaced main motor and dispenser. just have to take your time, turn off water and power and work safely
Other Parts Used:
-
Anthony from BURGETTSTOWN, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Soap scum on dishes and not drying.
Open the dishwasher door remove the utensil rack. Next remove all the remaining screws around the outside of the door. Close the door. Slightly lift up on the outside cover of the door, watch out for the wiring inside of the dispenser. Take the flat head micro screwdriver remove the two clips inside the dispenser and then the one main. Next remove the door sensor directly above it just to make the door cover to swing off to the side to make everything easy. Lift up the black flat remove the outside screws with a 6 mm socket push the dispenser back inside the dishwasher. Install and reverse directions don't forget to hook back up the wires.
Other Parts Used:
-
Joesph from FORT MADISON, IA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tammy
March 2, 2018
I am needing the door that goes over the liquid detergent area. The springs are gone out of ours so it does not pop open properly.
For model number WDF520PADM5
Hi Tammy, Thank you for the question.The door on the dispenser is only sold with the dispenser assembly, Part Number: PS11757054. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Erica
July 23, 2019
I need a dispenser spring only. I know they are available without buying the entire dispenser. Which spring do i need?
For model number WDT710PAHB1
Hello Erica, thank you for your question. For this model, the spring is not sold separately. You would have to order the entire dispenser assembly. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sunshine
January 7, 2020
My dishwasher is showing f8 e2. Do you know what is wrong with it and if so what would i need to fix it?Thanks
For model number WDT720OADM0
Hello Sunshine and thank you for writing.
There is a problem with the Dispenser System: Verify detergent drawer or detergent cartridge is not clogged with detergent. The model number you provided is not recognized. Please verify the number you provided us. If it is correct, we recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part! We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Joanne
February 15, 2018
Is this part what I need to replace the detergent and rinse and section on my inner door? The rinse aid portion will not work.
For model number WDT720PADM1
Hello Joanne, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11757054. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757054
Manufacturer Part Number: WPW10671905
Manufacturer Part Number: WPW10671905
Brand
Model Number
Description