This washing machine drain pump is an essential component responsible for efficiently removing wastewater during the drain cycle. Located at the bottom of the appliance, it operates by generating suction to draw water from the tub and direct it through the drain hose. If your washer is not draining properly, leaves clothes wet after a cycle, or produces unusual noises such as grinding or humming, the drain pump may be malfunctioning. Visible signs of damage or leaking also indicate the need for replacement. Installing the pump typically involves accessing the underside of the machine, disconnecting the old unit, and securing the new one in place, ensuring all hose connections are properly fitted to prevent leaks.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
DZEMIL M - April 7, 2021
Verified Purchase
Replace water pump
Best service
★★★★★
★★★★★
James B - October 11, 2022
Verified Purchase
Easy Repair, Part Fit Perfectly!!
Part was an exact replacement. Remove three screws, one hose clamp and a wire connector. Install the same and you're Done.
★★★★★
★★★★★
Osmund C - October 19, 2021
Verified Purchase
Perfect
The pump was the exact replacement of the damaged replacement pump.
★★★★★
★★★★★
Gary T - September 3, 2022
Verified Purchase
Easier than expected
Replacing the pump went very smooth. Excellent timing from order to door, 36 hours..YouTube video great help
★★★★★
★★★★★
Rock D - November 18, 2022
Verified Purchase
Easy repaire!!
Grenat conditions
★★★★★
★★★★★
Priya P - February 17, 2022
Verified Purchase
Great pair and easy to repair
Glad I knew about where to buy it. Techs seem to rip clients off on this part so you're better of doing it yourself
★★★★★
★★★★★
Jean Paul B - October 24, 2022
Verified Purchase
Easy repair - part fit perfectly
The part arrived quickly and was in good condition. It was a perfect fit and worked great when all was installed.
★★★★★
★★★★★
Darren B - July 21, 2021
Verified Purchase
Great part worked as expected
- part came in only a few days and worked perfectly to get our washing machine back in working order
★★★★★
★★★★★
David C - April 14, 2023
Verified Purchase
easy install and fast shipping
came fast and got my washer back up and running in short order. thanks.
★★★★★
★★★★★
Trevor G - November 4, 2021
Verified Purchase
Great part bolted right up.
Quick shipping and right part no hassle.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer would not drain
Im a 58 year old single woman. Swap out of pump motor was so easy. Took less than 15 min. Ordered the part on Tuesday it came the next day. I installed it and did 4 loads of laundry. Great company.
Other Parts Used:
Kris from W MANSFIELD, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Easy to install
I just drained the washer and unscrewed the 3 screws unhooked the hose clamp and installed the new one attached the hose and hose clip. Really easy. Took longer to try up water in floor than installing.
Other Parts Used:
John from LEXINGTON, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joseph
April 16, 2018
My Admiral washer fills up with water and I can hear it agitate, but when it gets to the spin cycle I hear no spinning and does not drain. Please help!
For model number ATW4675YQ1
Hi Joseph, Thank you for the question. I suggest testing the Lid Latch Assembly, PartSelect Number: PS3497627. If the switch is defective it will not allow the appliance to go into spin and drain. To test the switch, first and foremost disconnect your water and the power from your appliance before starting. Locate where your switch actually fits on to your appliance and place a magnet between them. Now there will be a magnetic connection between the lid switch and solenoid. After you do that, put the lid of the washer back on and turn on the appliance. If the appliance turns off, disconnect power once more and reposition the magnet. Caution. If you are at all uncomfortable with doing something like this, I would strongly suggest contacting a repair technician to come and help you. I hope this helps.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Joan
June 18, 2019
Washer will not drain
For model number ntw4516fw
Hello Joan, thank you for writing. For this symptom you will want to consider either the Water Pump, the Washer Drive Pulley, or the Agitator Repair Kit. The model number you provided is partial with multiple variations using some different parts. We will need the rest of the model number to look into the correct replacements. The missing information is a number at the end of what you provided.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Billy Harris
August 13, 2019
This washer work and goes throught cycles. However, when it get to spin it makes a alous scratching noise as if it having a hard time to spin and it does it again when the washer rinse, spin and drain as if same as above. 3 years old. I have a water pump well maybe sand is getting into the washer.
For model number MVWC415EW1
Hello Billy, thank you for contacting us. This could be due to either a faulty Washer Drive Pulley part number PS10057144 or Drive Belt part number PS11747978 for your model. I hope this helps and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Cristian
March 13, 2020
Hello i have a Maytag washer machine model mvwc415ew0, but when i connected the drain pump make a different noise and the washer machine not start the normal cycle. I don't know what is the problem.
For model number WPW10661045
Good Day Cristian. Thank you for your question in regards to your unit (Model Number MVWC415EW0). Based on our research, you may need to replace one or more of the following parts in order to solve the issue that you are having: 1) Lid Latch Assembly (PartSelect Number PS3497627). 2) Lid Latch Strike (PartSelect Number PS11750882). You can order these parts either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Hello Betty, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS2342445 for the Drain Pump and PartSelect Number PS3508101 for the Shock Absorber Kit. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
washer wont completely drain.can hear water under tub when rocking agitator
For model number WTW4800BQ1
Hello David, thank you for contacting us. The issue is most probably related to the drain pump, part number PS11757016. We would also recommend cleaning the drain filter and the drain hose to ensure that these are not clogged. We look forward to hearing from you if you need assistance with placing an order through our 7-day-a-week customer service. We hope this helps!
Was this helpful?
Thank you for voting!
Norma
May 8, 2019
Hi..my Amana washer won't rinse
For model number NTW4605EW0
Hi Norma, thank you for your question. There are a few parts that you should check when you are having this issue. The pump would be the first part to check. You should also check your switch and water inlet valve as well. I hope that helps. Good luck with your repair.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
