Not Canadian? Click here to return to Partselect.com...
Part Number WPW10512946 replaces: 339491, 339941, 4319305, 690997, AP6022517, W10512946, WPW10512946VP.
PartSelect Number PS11755850 Manufacturer Part Number WPW10512946 Manufactured by Whirlpool
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pulley shaft, or on the rear drum roller shaft. In either case, you will need to remove the front panel of the dryer and the drum to access the part for repair. Once you have accessed the damaged tri ring, you will simply need to slip it off and replace it with the new one. This part is sold individually. Be sure to disconnect the power source from the dryer before you begin this repair.
This part works with the following brands: Kenmore, Whirlpool, Maytag, KitchenAid, Roper, Crosley, Estate, Amana, Inglis, Admiral, Magic Chef.
This part works with the following products: Dryer, Washer Dryer Combo.
This part fixes the following symptoms: Noisy | Will not tumble
3 people found this helpful.
1 person found this helpful.
Didn't end up needing it but your service was impeccible. If only I could get my son to make his bed that quickly. Thanks
Part was easy to use. Clearly needed to be replaced as old was brittle. New part was easy to install
Worked well, but would have been better if one had come with the dryer idler pulley I was replacing. When the pulley arrived and I removed the old squealing one, the tri ring had become brittle and broke when I removed it. In future I will know to order the tri ring at the same time, but would have been an appreciated convenience if one had been included with the pulley.