Whirlpool WPW10509257 - Door Gasket - Gray | PartSelect.ca
Door Gasket - Gray – Part Number: WPW10509257
Door Gasket - Gray – Part Number: WPW10509257 Door Gasket - Gray – Part Number: WPW10509257 https://partselectca.azureedge.net/Schematics/Maytag/OAXZ05N9.gif

Door Gasket - Gray

8 Reviews

Your Price

CAD$76.86

PartSelect Number PS11755809
Manufacturer Part Number WPW10509257
Manufactured by Whirlpool

It provides a waterproof seal between the tub and the door.

This part works with the following brands: Whirlpool, Kenmore, Roper, Estate, Inglis, Maytag, Crosley, Magic Chef, Amana.

This part works with the following products: Dishwasher.

This part fixes the following symptoms: Leaking.

Videos For installing this part.

Questions & Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 4.4 / 5.0, 34 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Eileen from Salt Lake City, UT
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Parts Used:
WPW10509257
Dishwasher leaking at bottom of door
Installed new door seal. Dishwasher still leaked. Googled the model number and then cleaned the filter at the bottom of the dishwasher, still leaked.
Verified that manifold bearing was not work. It was OK.
Found note that a plugged vent might cause leaking door. Very counterintuitive. Pried off air vent cover. Vent was thouroughly plugged with calcium deposts from steam. Cleaned these out.
Dishwasher no longer leaks.
196 of 201 people found this instruction helpful.
Was this instruction helpful to you?
Phil from atascadero, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPW10509257
Water was dripping out of the front of the unit down low.
I removed the old gasket, installed the new one which took about 20 seconds.Tested the unit, water was still dripping, but in a different fashion.As per a previous poster's instructions I removed the vent cover. (Located inside the dishwasher up high.)I cleaned out the calcium deposits with hot water and a sacraficial toothbrush. "Ta-Da!" Everything is now groovy!Thank you so very much for your excellent service. Your site was easy to use and your shipping was "lightning fast!" Also, the advice you sent me was invaluable. I thank you, my wife thanks you and my trained lobster thanks you too! :)
68 of 72 people found this instruction helpful.
Was this instruction helpful to you?
Edward from Springfield, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPW10509257, WP8528862
Door Gasket was bad causing a water leak
This repair was very simple. I opened the door of the dishwasher then pulled the old rubber seal (gasket) out; I checked the old gasket to with the new one to ensure the new one was correct then installed the new one. There are two small rubber pieces located in mounting slots below the door gasket that slide out; I slide the old ones out and slide the new ones in. No tools required.
The thing that made the whole job easier was ordering the parts from Parts Select; I couldn't find exactly what I needed on the Whirlpool website but I found exactly what I needed on the Parts Select website and the parts were a perfect match.
51 of 59 people found this instruction helpful.
Was this instruction helpful to you?
KEVIN from PLAINFIELD, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP8066018, WP3378138, WPW10509257, WP3372028, WP3371710
soap dispenser door/spring broken
removed old parts and re-installed new parts. The spring is a little hard to get to the right point without a jewelers screwdriver, after that everything worked fine.
27 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Henry from Raleigh, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPW10509257, 3369479
Dish Washer was leaking every once and a while. Shield came out and was deformed by heatinfg eliment and was found on the bottom of the unit.
The gasket was a breeze, with just pulling out the old one and slowly pushing in the new in the track with my fingers. The shield was a little harder since there was no instructions before me. It turns out that it fits in the inner door and is used as a baffel for the steam (another problem with leaking out the bottom). After removing the front cosmetic pannel you need to thread the shield inside on three tabs that hold it. It took a few times to orientate it properly but it snaps in when correct. After the front pannel was put on and the unit test operated, the washer no longer leaks. Highly recommend the parts and help from PartSelect and the others before me.
20 of 26 people found this instruction helpful.
Was this instruction helpful to you?
John from Manchester, CT
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
Parts Used:
WPW10509257, WP9742946, 675806, WP3379369
Dishwasher Rehab
After hearing ominous grinding sounds and water leaking around the gasket, it was about time to rehab the dishwasher. This is usually the point where I say "t'hell with it, buy a new one". I am glad I didn't.
The Kit to rehab the impeller and such had EVERYTHING I needed. Right parts, right price.
Removed the upper arm assembly, T15 screwdriver, the screen strainer, the impeller, T25 screwdriver, the food grinding spring and impeller (the grinding noise, spring was sprung), and finally the post and impeller thingie (had to break it off, very brittle). The pieces went back on a lot more smoothly than it took to get them off!
Use your digital camera! I took pictures of every stage of the parts removal and what I removed. I got confused with some little balls that were inside and the pictures told me exactly where they went.
Door gasket? I should have replaced it YEARS ago, so easy and cheap with PartSelect parts.
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Stanley R from Pineola, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WPW10273574, WPW10509257
Water intake hose leaked between plastic/hose connection (metal crimped clamp)
Since I had never made a repair on this 14 year old Kitchen Aid dishwasher, it was "discover as you go." First turned it on its back, took off bottom, disconnected both hoses and found out that hoses would not move. So, had to take off top and remove the back/side unit to get to hoses on top side where they were fastened by tape and a hose holder. Replaced hoses, used old clamp and "buttoned" it up.
10 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Catherine from Holbrook, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
WPW10509257
dishwasher leaks from left side of door
The old gasket came out easily, but had calcium deposits in area. I cleaned the area with vinegar and water and waited until it was completely dry. The new gasket went in very easily and looked great. I started the dishwasher and alas, it still leaks, so the problem was apparently not with the gasket, but some other area. But the gasket is nice and new. Any suggestions on next step0 in troubleshooting?
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
SHANE from Dunkirk, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPW10509257
dishwasher leaked
first i picked out the old seal, use a screwdriver to get it started. Then I pushed the new one in after cleaning the seal channel. I fixed it during a commercial while watching my favorite tv show.
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Michael from Germanton, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPW10509257, WP8528862
Dish Washer was leaking badly
Simply removed deflectors and gasket, replaced all , took all of 5 mins. workes great now.
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
8 Reviews
4.9
out of 5
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Kenmore
110723120
Dishwasher
Kenmore
110773811
Dishwasher
Kenmore
110773812
Dishwasher
Kenmore
110773813
Dishwasher
Kenmore
110773881
Dishwasher
Kenmore
110773882
Dishwasher
Kenmore
110773883
Dishwasher
Kenmore
657.15755791
Dishwasher - Kenmore Dishwasher Model 657.15755791 (65715755791, 657 15755791) Parts
Kenmore
665.15595791
Dishwasher - Kenmore Dishwasher Model 665.15595791 (66515595791, 665 15595791) Parts
Kenmore
665.1574991
Dishwasher - Kenmore Dishwasher Model 665.1574991 (6651574991, 665 1574991) Parts
Kenmore
665.15822692
Dishwasher - Kenmore Dishwasher Model 665.15822692 (66515822692, 665 15822692) Parts
Kenmore
665.1588791
Dishwasher - Kenmore Dishwasher Model 665.1588791 (6651588791, 665 1588791) Parts
Kenmore
665.15897990
Dishwasher - Kenmore Dishwasher Model 665.15897990 (66515897990, 665 15897990) Parts
Kenmore
665.16517990
Dishwasher - Kenmore Dishwasher Model 665.16517990 (66516517990, 665 16517990) Parts
Kenmore
66513402K900
Dishwasher
Kenmore
66513402K901
Dishwasher
Kenmore
66513409K900
Dishwasher
Kenmore
66513409K901
Dishwasher
Kenmore
66513442K900
Dishwasher
Kenmore
66513442K901
Dishwasher
Kenmore
66513443K900
Dishwasher
Kenmore
66513443K901
Dishwasher
Kenmore
66513444K900
Dishwasher
Kenmore
66513444K901
Dishwasher
Kenmore
66513449K900
Dishwasher
Kenmore
66513449K901
Dishwasher
Kenmore
66513492K600
Dishwasher
Kenmore
66513499K600
Dishwasher
Kenmore
66513592K600
Dishwasher
Kenmore
66513593K600
Dishwasher