Maytag/Maytag_Thumb/OAXZ05N9.gif
See part 10 in the diagram
Replacing your Whirlpool Dishwasher Dishwasher Door Gasket - Gray play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Dishwasher Door Gasket - Gray

★★★★★
★★★★★
20 Reviews
$78.55   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 66513443K900!
 Fits your 66513443K900!
PartSelect Number PS11755809
Manufacturer Part Number WPW10509257
Manufactured by Whirlpool
Product Description

Dishwasher Door Gasket - Gray Specifications

It provides a waterproof seal between the tub and the door.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, Roper, Estate.
Part# WPW10509257 replaces these:
AP6022476, 3368994, 3376927, W10082795, W10509257, WPW10509257VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Yvette
November 2, 2017
My dishwasher is leaking and water running out from under the door and onto the bottom panel all across the door big puddles help
For model number DU930PWSS0
Hi Yvette, Thank you for the question. I suggest checking the door gasket to see if there is any damage. There is the seal that runs along the top and sides of the door and one that runs across the bottom. The bottom seal is only sold as part of the door frame. Hope this helps!

12 people found this helpful.

Was this helpful?
Thank you for voting!
Ashley
May 17, 2019
How do i know if this the problem to my leak??
For model number DU600PWKQ0
Hello Ashley, thank you for your question. If the door is leaking around the edges or corners of the door this could be the cause of the leak. If your dishwasher is leaking water, first inspect the seal for food particles near the bottom and sides, and remove it. A buildup can stop the door from closing properly and keeping a tight seal. Check the door gasket for tears, cuts, or wear. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Bob
February 10, 2020
Replacing gasket-it is about an inch and a half to long on each side and the bottom hangs out?
For model number DU620PWK00
Hi Bob, thank you for your question. We might suggest double checking the installation. We have a video here: https://youtu.be/3sA8N32CBg0. If you still have a little left over that will be alright as long as it does not impede with your door shutting closed. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Zhipeng
February 14, 2022
my dishwasher is leaking from top of door. I don't know if it is sealer issue. Does this part fit my dishwasher? thanks
For model number DUB50DWGQ1
Hi Zhipeng, Thank you for your question. Yes, this would be the correct door gasket for your dishwasher. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Paul
April 28, 2022
Just got my new dishwasher door gasket and it's longer than the old one should I just measure the old 1 and cut the new 1
For model number 66515795791
Hello Paul, thank you for your question. We would recommend installing the part first and if it is still too long, some may be cut off. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
James
December 6, 2022
I replaced the door gasket with one I bought from Partselect but my dishwasher is still leaking from the bottom right side. Ay idea what I should do to fix this problem. Thanks Jim
For model number 66515719000
Hi James, thank you for reaching out. According to our research, we would suggest replacing the Water Deflector, part number PS11746099. The Water Deflector attaches to the front lower corner of the tub to prevent water from leaking through the door. If that does not help, we would suggest checking the Pump Gasket, part number PS384950. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Laurent
November 2, 2021
PS11755809. Does this gasket will fit on my Inglis IJU58660?
For model number IJU58660
Hi Laurent, Thank you for your question. The part number listed under your model number for the door gasket is PS11755809. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Was this helpful?
Thank you for voting!
Related Parts:
Part Videos

Replacing your Whirlpool Dishwasher Dishwasher Door Gasket - Gray

Replacing your Whirlpool Dishwasher Dishwasher Door Gasket - Gray play video
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 34 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher leaking at bottom of door
Installed new door seal. Dishwasher still leaked. Googled the model number and then cleaned the filter at the bottom of the dishwasher, still leaked.
Verified that manifold bearing was not work. It was OK.
Found note that a plugged vent might cause leaking door. Very counterintuitive. Pried off air vent cover. Vent was thouroughly plugged with calcium deposts from steam. Cleaned these out.
Dishwasher no longer leaks.
Other Parts Used:
  • Eileen from Salt Lake City, UT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
226 of 234 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was dripping out of the front of the unit down low.
I removed the old gasket, installed the new one which took about 20 seconds.Tested the unit, water was still dripping, but in a different fashion.As per a previous poster's instructions I removed the vent cover. (Located inside the dishwasher up high.)I cleaned out the calcium deposits with hot water and a sacraficial toothbrush. "Ta-Da!" Everything is now groovy!Thank you so very much for your excellent service. Your site was easy to use and your shipping was "lightning fast!" Also, the advice you sent me was invaluable. I thank you, my wife thanks you and my trained lobster thanks you too! :)
Other Parts Used:
  • Phil from atascadero, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
80 of 84 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Gasket was bad causing a water leak
This repair was very simple. I opened the door of the dishwasher then pulled the old rubber seal (gasket) out; I checked the old gasket to with the new one to ensure the new one was correct then installed the new one. There are two small rubber pieces located in mounting slots below the door gasket that slide out; I slide the old ones out and slide the new ones in. No tools required.
The thing that made the whole job easier was ordering the parts from Parts Select; I couldn't find exactly what I needed on the Whirlpool website but I found exactly what I needed on the Parts Select website and the parts were a perfect match.
Other Parts Used:
Water Deflector
  • Edward from Springfield, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
56 of 64 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
soap dispenser door/spring broken
removed old parts and re-installed new parts. The spring is a little hard to get to the right point without a jewelers screwdriver, after that everything worked fine.
Other Parts Used:
Spring, Lid Soap Dispenser Cover Pin (Lid Hinge) Door Vent Screen
  • KEVIN from PLAINFIELD, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
29 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dish Washer was leaking every once and a while. Shield came out and was deformed by heatinfg eliment and was found on the bottom of the unit.
The gasket was a breeze, with just pulling out the old one and slowly pushing in the new in the track with my fingers. The shield was a little harder since there was no instructions before me. It turns out that it fits in the inner door and is used as a baffel for the steam (another problem with leaking out the bottom). After removing the front cosmetic pannel you need to thread the shield inside on three tabs that hold it. It took a few times to orientate it properly but it snaps in when correct. After the front pannel was put on and the unit test operated, the washer no longer leaks. Highly recommend the parts and help from PartSelect and the others before me.
Other Parts Used:
SHIELD
  • Henry from Raleigh, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
22 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher Rehab
After hearing ominous grinding sounds and water leaking around the gasket, it was about time to rehab the dishwasher. This is usually the point where I say "t'hell with it, buy a new one". I am glad I didn't.
The Kit to rehab the impeller and such had EVERYTHING I needed. Right parts, right price.
Removed the upper arm assembly, T15 screwdriver, the screen strainer, the impeller, T25 screwdriver, the food grinding spring and impeller (the grinding noise, spring was sprung), and finally the post and impeller thingie (had to break it off, very brittle). The pieces went back on a lot more smoothly than it took to get them off!
Use your digital camera! I took pictures of every stage of the parts removal and what I removed. I got confused with some little balls that were inside and the pictures told me exactly where they went.
Door gasket? I should have replaced it YEARS ago, so easy and cheap with PartSelect parts.
Other Parts Used:
Wash Arm Bearing Ring Drain and Wash Impeller Kit Upper Wash Assembly
  • John from Manchester, CT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
15 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water intake hose leaked between plastic/hose connection (metal crimped clamp)
Since I had never made a repair on this 14 year old Kitchen Aid dishwasher, it was "discover as you go." First turned it on its back, took off bottom, disconnected both hoses and found out that hoses would not move. So, had to take off top and remove the back/side unit to get to hoses on top side where they were fastened by tape and a hose holder. Replaced hoses, used old clamp and "buttoned" it up.
Other Parts Used:
Drain and Fill Hose Assembly
  • Stanley R from Pineola, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
12 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher leaked
first i picked out the old seal, use a screwdriver to get it started. Then I pushed the new one in after cleaning the seal channel. I fixed it during a commercial while watching my favorite tv show.
Other Parts Used:
  • SHANE from Dunkirk, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher leaks from left side of door
The old gasket came out easily, but had calcium deposits in area. I cleaned the area with vinegar and water and waited until it was completely dry. The new gasket went in very easily and looked great. I started the dishwasher and alas, it still leaks, so the problem was apparently not with the gasket, but some other area. But the gasket is nice and new. Any suggestions on next step0 in troubleshooting?
Other Parts Used:
  • Catherine from Holbrook, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
10 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dish Washer was leaking badly
Simply removed deflectors and gasket, replaced all , took all of 5 mins. workes great now.
Other Parts Used:
Water Deflector
  • Michael from Germanton, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
20 Reviews
4.9
Filter By Rating:
  • 5 Stars
    18
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11755809
Manufacturer Part Number: WPW10509257
Brand
Model Number
Description
Kenmore
110723120
Dishwasher
Kenmore
110773811
Dishwasher
Kenmore
110773812
Dishwasher
Kenmore
110773813
Dishwasher
Kenmore
110773881
Dishwasher
Kenmore
110773882
Dishwasher
Kenmore
110773883
Dishwasher
Kenmore
65715755791
Dishwasher - Kenmore Dishwasher Model 657.15755791 (65715755791, 657 15755791) Parts
Kenmore
66513402K900
Dishwasher
Kenmore
66513402K901
Dishwasher
Kenmore
66513409K900
Dishwasher
Kenmore
66513409K901
Dishwasher
Kenmore
66513442K900
Dishwasher
Kenmore
66513442K901
Dishwasher
Kenmore
66513443K900
Dishwasher
Kenmore
66513443K901
Dishwasher
Kenmore
66513444K900
Dishwasher
Kenmore
66513444K901
Dishwasher
Kenmore
66513449K900
Dishwasher
Kenmore
66513449K901
Dishwasher
Kenmore
66513492K600
Dishwasher
Kenmore
66513499K600
Dishwasher
Kenmore
66513592K600
Dishwasher
Kenmore
66513593K600
Dishwasher
Kenmore
66513594K600
Dishwasher
Kenmore
66513599K600
Dishwasher
Kenmore
66513692K600
Dishwasher
Kenmore
66513699K600
Dishwasher
Kenmore
66514212K900
Dishwasher
Kenmore
66514212K901
Dishwasher

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service