Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
December 12, 2017
Hi, the top drawer has nothing to stop it from rolling out to far and coming off the track on one side and dropping down. It looks like the little clip, which can be 'flipped out" to remove the draw, or " flipped in" to stop the drawer is missing on on side. I don't see that part sold separately, do i need to buy part #10 to get it?
For model number WDT920SADM2
Hi John,
Thank you for your question. Yes, it does look like underneath your model information you would have to buy the whole track to get the rail stop at the end. I hope this helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Lori
October 8, 2019
Does the upper track (10) have a left and right? Or would this piece fit each side? I really only need the rail stop, can i purchase this separately?
For model number WDT920SADH2
Hi Lori, thank you for your question. It looks like for your model it does not. The track is the same part for both sides. Unfortunately no, the stop only comes with the track. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
