See part 20 in the diagram
( Grid squares measure 1x1 inch )
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 9pm EST
Refrigerator Fan Blade & Spring Clip WPW10445742
$20.46
In Stock
Does this part fit my model?
Need help finding your model number?PartSelect Number
PS11754833
Manufacturer Part Number
WPW10445742
Manufactured by
Whirlpool
Product Description
Refrigerator Fan Blade & Spring Clip Specifications
This blade attaches to the evaporator fan motor.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy | Too warm | Frost buildup
This part works with the following products:
Freezer, Refrigerator.
This part works with the following products:
Whirlpool, Crosley, Amana, Maytag.
Part# WPW10445742 replaces these:
AP6021509, 1-80250-101, 1-80250-102, 14214045, 4356920, 4390912, 68001595, W10445742
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Steven P - August 1, 2018
Verified Purchase
Great part, foolwed recommeded instructions, less than 20 minutes to repair
Part was better than original as it included a metal stop in the middle of the spring lock. No need to remove this as this positions the fan correctly. Original cause of the noise was the fan slipping down the shaft of the motor until it hit the nuts. Fan blade shears off and then everything is out of balance. One recommendation was to switch the bolt direction to prevent this in the future but with the redesign on the spring lock that holds the fan closer to the end of the shaft this is probably not necessary. some difficulty replacing the back panel but can be easily overcome by starting all screws slightly before finalizing. this allows the screws to be properly located rather than searching for the screw receptor when the panel is in place. Very fast delivery of part. Thanks.
Dixie D - December 27, 2019
Verified Purchase
Satisfied customer
Fixed the problem quickly received the part promptly
Dennis G - September 11, 2018
Verified Purchase
Quick fix to an annoying noise
I was surprised how quickly the part came , it was a perfect fit ,and totally eliminated the constant noise we had from a broken blade ,,, easy to change Thanks to Parts Select and the reviews and how to's
Lindsay P - November 15, 2020
Verified Purchase
Great service
Excellent service parts are perfect thank you
ARJAN B - February 18, 2019
Verified Purchase
Excellent product, Fast shipping
The part arrived within 2 days and I installed it in 20 min. Great transaction
Joseph S - October 6, 2022
Verified Purchase
Fan
Part was just what I ordered and service was just as good
Don B - March 16, 2021
Verified Purchase
It did the trick nicely!!
Took a bit longer to get my fan blade(was backordered..nobodys fault) but installed as soon as I received it and we're back in good running order. I'll definitely keep you guys in mind for future orders. Thanks a lot, Don
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Froze over fan motor burnt out
Removed shelves from inside freezer then removed 4 screws holding cover panel. Pulled panel up and slightly pulled forward to remove. Removed wiring connections then removed two screws that held the motor & fan assembly. Removed the support bracket from the old motor and installed same on the support bracket. Reversed removal procedures for installation. Cover panel is a little bit of a problem when trying to reinstall. Put in panel as high as you can and then slide down. You must then exert a little pressure on the bottom portion to get it to seat correctly. Install four remaing screws and you are done. I had this repaired previously by a professional repairman and noticed from the pictures you folks provided that he had installed the screws on the support bracket incorrectly. That was the reason for the fan blade to rip apart.
Other Parts Used:
-
James L. from Madison, AL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
71 of 80 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken fan blade, missing two blades
Turn off power to freezer. Removed two shelves, removed four phillip screws and cover. Used 5/16 nutdriver to remove two fan motor bracket bolts. Did not disconnect wiring, had enough room to flip motor over and remove broken fan blade and attach new fan blade. After reading remarks from another home tech, I reversed the bolts holding motor to bracket, so nuts would not come in contact with fan blades again. Still not sure why fan would of slipped down to break. Running good now!
Other Parts Used:
-
GREG from FLAGSTAFF, AZ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
24 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Evaporator fan was not running.
When we discovered that the freezer was not holding temperature we quickly moved everything we could to the freezer compartment of our refrigerator. I then removed the shelves and basket from the freezer.
I used a Philips screwdriver and removed the 4 screws from the panel at the rear of the freezer. I discovered that 1 of the 4 fan blades had broken off and was laying in the bottom of the freezer. I plugged the freezer in and found that the motor was not running. I removed the bracket which holds the fan and motor with a socket wrench.
When I received the fan and new motor I installed both by reversing the process.
The only issue I had to deal with was that the auto-defrost wire had to be carefully removed from the old motor plug and inserted in the new plug. Once that was accomplished everything was simple.
I used a Philips screwdriver and removed the 4 screws from the panel at the rear of the freezer. I discovered that 1 of the 4 fan blades had broken off and was laying in the bottom of the freezer. I plugged the freezer in and found that the motor was not running. I removed the bracket which holds the fan and motor with a socket wrench.
When I received the fan and new motor I installed both by reversing the process.
The only issue I had to deal with was that the auto-defrost wire had to be carefully removed from the old motor plug and inserted in the new plug. Once that was accomplished everything was simple.
Other Parts Used:
-
Terry from Cantonment, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two blades on fan broken off
Ordered fan from Parts Select installed on fan motor and replaced cover.
Other Parts Used:
-
Henry from Weatherford, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
4 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problems
My brother repaired it but he said it was easy. Freezer works great again. Thanks guys
Other Parts Used:
-
Denise from BULLHEAD CITY, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stefanie
October 28, 2019
The freezer kicks on continuously and is very noisy while it is running. It also gets a thick ice build upon the bottom of the freezer and freezes the wire rack to the bottom of the freezer. When i pulled the cover off to find the source of the noise i did see the fan blades have some wear on them and the evaporator is where the water is dripping from.
For model number EVL201NXRQ04
Hello Stefanie, thank you for your question. We would recommend testing/replacing the thermostat, start relay, and overload as these parts work together to start the compressor and keep it running for the allotted time it takes to cool. If the water is coming from the evaporator, changing the aforementioned parts should fix the problem. If the problem persists, we would recommend testing the defrost timer, defrost heater, and defrost thermostat. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
$312.20
In Stock
Freezer Evaporator Fan Motor
$312.20
PartSelect Number: PS11740626
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. 
$27.28
In Stock
Refrigerator Produce Preserver
$27.28
PartSelect Number: PS3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f... 
$16.38
In Stock
Washer Affresh Cleaner
$16.38
PartSelect Number: PS1960673
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets. 
$19.71
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.71
PartSelect Number: PS12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ... 
$29.30
In Stock
$22.38
In Stock
Cooktop Cleaning Cream
$22.38
PartSelect Number: PS12717774
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d... 
$21.75
On Order
Range Cleaner
$21.75
PartSelect Number: PS3492527
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11754833
Manufacturer Part Number: WPW10445742
Manufacturer Part Number: WPW10445742
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 9pm EST