We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Phil
December 10, 2018
I'm looking for the control switch for the front right burner 10" single burner.
For model number WFE520C0AS0
Hello Phil, thank you for your question. The switch for that unit is PartSelect Number PS11740783. Please enter the part number into the site for current price and availability. Good luck with your repair!
3 people found this helpful.
Thank you for voting!
Alex
June 17, 2019
The burner in the front left that has two sizes only works when the knob is turned to a specific spot. It seems to only run on high when the spot is hit. Is this the correct part that would fix this issue. All other burners work correctly.
Hello Alex, thank you for writing. Replacing the Dual Infinite Switch may fix the issue, but we will need the model number for the stove to see if this is the correct replacement or which one is. We look forward to hearing back from you.
3 people found this helpful.
Thank you for voting!
Andrew M
February 27, 2019
I’m looking for the part number for the front, right burner control/switch for Whirlpool wfe515s0es0. Tks
For model number WFE515S0ES0
Hello Andrew, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PS11740783. Have a great day!
2 people found this helpful.
Thank you for voting!
Walter
July 2, 2019
My dual burner only sets on hi, does that mean the control switch or burner is bad? Thanks
For model number KERS202bwh0
Hi Walter, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Thank you for voting!
Helen
September 6, 2019
My burner on the front left is not working.. what is the part number for the element and also the switch?
For model number wfe710h0ah
Hello Helen, thank you for your question. The left front element is PartSelect Number PS11749881. The switch for that element is PartSelect Number PS11754687. Good luck with your repair!
1 person found this helpful.
Thank you for voting!
Jeff
September 24, 2019
Whirlpool YWFE710H0BS0 range, it appears the infinity control may be shot for the left front burner. It is a dual control. There are 3 different control numbers. Is the correct replacement number WPW10434452?? thanks in advance.
For model number YWFE710H0BS0
Hi Jeff,
Thank you for your question. The part number listed under your model number for the infinite switch for the dual burner is WPW10434452. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Thank you for voting!
Simon
December 3, 2019
My left front dual burner on my Maytag ymer7765ws3 is always on high. Is this the right part to change it?
For model number YMER7765WS3
Hello Simon, thank you for inquiring. Yes, replacing this Dual Infinite Control Switch for your model should fix the issue. Good luck with your repair!
1 person found this helpful.
Thank you for voting!
Joe
November 23, 2019
My front left dual burner, 9"/6" element only works on the outer burner not the small inside, to fix that, this particular problem would be changing the burner or is it a switch problem or both, please what part number I need for the dual burner and if the switch is needed what part for the left front switch as well, thanks
For model number WFE515S0ES1
Hi Joe, I cannot say for this what the problem is, although a faulty element is likely, you are right it could be the switch as well. I have linked the two parts below. Thank you for your question and good luck with your repair!
Thank you for voting!
Joel
February 5, 2020
Front left dual burner will only burn on high when turned on, will this fix the problem?
For model number WFE510s0as0
Hello, Thank you for your question. This issue is either caused from a faulty element or a infinite switch. The element Part# PS11764929, and the switch Part#PS11754687. You will need a multi meter to be able to test the parts, the element should be reading between 0 - 120 ohms to be working correctly. When you remove the switch from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.
Thank you for voting!
Alex
June 17, 2019
Thanks for the response. The model number is WFE510S0AS0. The burner in the front left that has two sizes only works when the knob is turned to a specific spot. It seems to only run on high when the spot is hit. Is this the correct part that would fix this issue. All other burners work correctly.
For model number WFE510S0AS0
Hi Alex,
Thank you for your great question. Yes, if your burner is only working on one setting, then the dual infinite control switch will resolve this issue. I hope this helps.
Thank you for voting!
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!"