This switch controls the stove top surface burner.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Range Dual Element Control Switch
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Maytag, Amana, KitchenAid.
Part# WPW10434452 replaces these:
W10434452
Customer Reviews
Average Rating:
★★★★★
★★★★★
12 Reviews
4.9
Filter By Rating:
5 Stars
11
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David B - Yesterday
Verified Purchase
Right fit !
The most important thing to pay attention to other than the number of connector terminals wich is a perfect match...is the shape of the shaft to receive the control knob...in my case when i did a search , when you fill in the model number YWFE710H0DE0 whirlpool oven , the switch shaft on my dual element control is not the same as its shown in the control panel parts diagram for that model ..the one that fit is in this case is part number WPW10434452 to fit the shaft hole in my dual element control knob ...so when you do a search on the partSelect website make sure you can see to top part of the shaft and lenght.
★★★★★
★★★★★
Lesley T - January 3, 2024
Verified Purchase
Element control switch
The part was delivered quickly, was the perfect fit and just what I needed. Easy installation after watching the video. Well done.
★★★★★
★★★★★
Robert P - December 4, 2023
Verified Purchase
excellente pièce
la livraison rapide, j'ai regardé la vidéo comment installer la pièce et je n'ai pas eu de problème a l'installer vraiment facile, il fonctionne très bien je vous le recommande
★★★★★
★★★★★
Donald N - May 12, 2023
Verified Purchase
easy to replace
the items came fast ,quick and easy to install thanks
★★★★★
★★★★★
CECIL N - April 15, 2023
Verified Purchase
switch replacement
The delivery time was a pleasant surprise . My wife timed the repair and the time required was 11 min. Most of the time was for cleaning behind the stove
★★★★★
★★★★★
Bryon H - August 28, 2020
Verified Purchase
The repair was very easu
The part arrived in good time. The part was identical to the original and the repair was easy
★★★★★
★★★★★
Alex W - October 30, 2019
Verified Purchase
Element would not turn off, now works fine.
Genuine part, works as expected
★★★★★
★★★★★
Michael G - March 25, 2019
Verified Purchase
Easy part to change.
The part came in very good time and fit perfect, great service and would recommend this site to anybody. Thanks.
★★★★★
★★★★★
John B - January 29, 2019
Verified Purchase
easy repair
the parts came on time and the stove is working order again thank you
★★★★★
★★★★★
Tony L - January 17, 2019
Verified Purchase
Easy repair. Part worked like a charm
The repair was very strait forward and the part arrived in no time. The u tube video I looked at gave me the confidence I needed. Thanks
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Switch worked off and on but you could not set heat to a specified temperature.
Remove back panel 10 screws. Disconnect plug in fixture from switch. Front of range remove knob (it just pulls out) remove 2 screws, remove switch. To install reverse procedure.
Other Parts Used:
Dale from POUND, WI
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bard burner switch
Removed rear panel disconnect power from wall removed old switch and replaced with new switch and reassembled
Other Parts Used:
Edward from KISSIMMEE, FL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
44 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alex
June 17, 2019
The burner in the front left that has two sizes only works when the knob is turned to a specific spot. It seems to only run on high when the spot is hit. Is this the correct part that would fix this issue. All other burners work correctly.
Hello Alex, thank you for writing. Replacing the Dual Infinite Switch may fix the issue, but we will need the model number for the stove to see if this is the correct replacement or which one is. We look forward to hearing back from you.
16 people found this helpful.
Was this helpful?
Thank you for voting!
Simon
December 3, 2019
My left front dual burner on my Maytag ymer7765ws3 is always on high. Is this the right part to change it?
For model number YMER7765WS3
Hello Simon, thank you for inquiring. Yes, replacing this Dual Infinite Control Switch for your model should fix the issue. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Phil
December 10, 2018
I'm looking for the control switch for the front right burner 10" single burner.
For model number WFE520C0AS0
Hello Phil, thank you for your question. The switch for that unit is PartSelect Number PS11740783. Please enter the part number into the site for current price and availability. Good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Craig Strickland
January 30, 2019
I have a Whirlpool gas top and the the burner that is a big and small burner together will not turn down, it stays on high, don't know if it is the burner or the switch, please help.
For model number Wfe515s0es0
Hello Craig, thank you for your question. When a burner remains on high and can't be controlled, the most likely issue is the switch. We would recommend replacing PartSelect Number: PS11754687. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Andrew M
February 27, 2019
I’m looking for the part number for the front, right burner control/switch for Whirlpool wfe515s0es0. Tks
For model number WFE515S0ES0
Hello Andrew, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PS11740783. Have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
September 24, 2019
Whirlpool YWFE710H0BS0 range, it appears the infinity control may be shot for the left front burner. It is a dual control. There are 3 different control numbers. Is the correct replacement number WPW10434452?? thanks in advance.
For model number YWFE710H0BS0
Hi Jeff,
Thank you for your question. The part number listed under your model number for the infinite switch for the dual burner is WPW10434452. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
November 19, 2019
My front right burner comes on, but no matter if i have it on low, med, or hi, it stays on hi. Will this fix my issue? Thanks.
For model number MER8680BB0
Hello Patrick,
Thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Alex
June 17, 2019
Thanks for the response. The model number is WFE510S0AS0. The burner in the front left that has two sizes only works when the knob is turned to a specific spot. It seems to only run on high when the spot is hit. Is this the correct part that would fix this issue. All other burners work correctly.
For model number WFE510S0AS0
Hi Alex,
Thank you for your great question. Yes, if your burner is only working on one setting, then the dual infinite control switch will resolve this issue. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Walter
July 2, 2019
My dual burner only sets on hi, does that mean the control switch or burner is bad? Thanks
For model number KERS202bwh0
Hi Walter, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Helen
September 6, 2019
My burner on the front left is not working.. what is the part number for the element and also the switch?
For model number wfe710h0ah
Hello Helen, thank you for your question. The left front element is PartSelect Number PS11749881. The switch for that element is PartSelect Number PS11754687. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
