Part Location Diagram of WPW10406878 Whirlpool Burner Head - 16K
See part 2 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Burner Head - 16K

★★★★★
★★★★★
1 Review
$73.44
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11754347
Manufacturer Part Number WPW10406878
Manufactured by Whirlpool
Product Description

Burner Head - 16K Specifications

This part distributes flame evenly to your cookware.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Maytag, Whirlpool, KitchenAid, Jenn-Air.
Part# WPW10406878 replaces these:
74007413, 7540P033-60, 8286183, W10406878
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 2.7 / 5.0, 2 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Other Parts Used:
Burner Head - 12K Burner Head - 9.2k - Right Rear & Center Burner Head - 6K
  • Charles from ATLANTA, GA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Head burner had something spilled on it which stained it and left a large dark brown spot
Simply remove two screws take old one off and line up and put new one on and replace the two screws. Couldn't have been easier.
Other Parts Used:
  • Donald from Hudsonville, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
6 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
February 4, 2020
What is the part number for the two t15 torx screws used to fasten the burner base? They are not shown in any of your diagrams!
For model number MGT8775XW01
PartSelect logo
Hello Paul, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11741257. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Glenn
October 26, 2022
I am looking at PS11754347 to replace the 4" diameter burner head on my gas range. The reason is the burner flame will initially burn clean blue but after a while start hissing and burn yellow. The hold down screws on the existing burner head are corroded to the point that the screw heads are gone so the burner head can be removed. The screw remnants are corroded in place and cannot be removed. Without the hold down screws to hold it flush, the existing burner head appears to be warping under the burner cap creating the hiss and yellow flame. Will a new burner fix this problem even if it cannot be installed with the hold down screws?
For model number JDR8895AAS
PartSelect logo
Hi Glenn, thank you for reaching out. According to our research on the model, the Burner Head appears to be faulty and you may need to replace it with part number PS11754347. If the screws are also corroded, replace them with part number PS11742240. If you need help placing an order, customer service is available 7 days a week. Glad to be of help!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
CYNTHIA
February 5, 2018
Will this burner work on our model of stove (wgg755s0bs00)???? what is the difference between 12k and 16k?
For model number WGG755S0BS00
PartSelect logo
Hi Cynthia, Thank you for your question. Yes, this burner is listed under your model number and it is designed to work for your appliance. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Butch
November 12, 2019
Is your part the replacement for the front right burner on my jenn air stove
For model number Jdr8895aas
PartSelect logo
Hello Butch and thanks for writing. Yes, this is the correct burner head. We hope this helps. Please contact us at any time

Was this helpful?
Thank you for voting!
  • 1
;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11754347
Manufacturer Part Number: WPW10406878
Brand
Model Number
Description
Kenmore
66578002700
Range
Kenmore
66578002800
Range
Kenmore
66578002801
Range
Kenmore
66578002802
Range
Kenmore
66578002803
Range
Kenmore
66578003700
Range
Kenmore
66578003800
Range
Kenmore
66578003801
Range
Kenmore
66578003802
Range
Kenmore
66578003803
Range
Kenmore
66578003804
Range
Kenmore
66578009700
Range
Kenmore
66578009800
Range
Kenmore
66578009801
Range
Kenmore
66578009802
Range
Kenmore
66578009803
Range
Kenmore
66578009804
Range
Amana
AGR5725QDB
Range - Freestanding, Gas
Amana
AGR5725QDQ
Range - Freestanding, Gas
Amana
AGR5725QDS
Range - Freestanding, Gas
Amana
AGR5725QDW
Range - Freestanding, Gas
Amana
AGR5725RDB
Range - Freestanding, Gas
Amana
AGR5725RDB12
Range
Amana
AGR5725RDB13
Range
Amana
AGR5725RDB14
Range
Amana
AGR5725RDB15
Range
Amana
AGR5725RDB16
Range
Amana
AGR5725RDQ
Range - Freestanding, Gas
Amana
AGR5725RDQ12
Range
Amana
AGR5725RDQ13
Range
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service