Product Description
Drain Hose Specifications
This hose is used to drain the water.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Dishwasher Drain Hose
Troubleshooting
This part fixes the following symptoms:
Leaking | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, KitchenAid, Whirlpool, Inglis.
Part# WPW10358302 replaces these:
AP6020376, 8269112, 8270145, 8531022, W10358302, W10418851
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Laurent J - December 18, 2021
Verified Purchase
Worked as expected
Overpriced so 4 stars
Harry H - May 26, 2021
Verified Purchase
Worked as expected
Received part next day, had installed by plumber and dish washer up and running again. Thank you.
John G - May 13, 2020
Verified Purchase
It worked
The part that was shipped was not the same as the photo and was not the proper fit for my dishwasher. There were supposed to be non ribbed areas on the hose to fit into the side clips . It worked with a little help but not the part I ordered or was shown. I hope it doesn't damage the hose.
Claude L - May 27, 2019
Verified Purchase
Drain hose
Your video was very useful to repair this part. Part came in two days after the purchase. My dishwasher is back in working order.
Alan M - April 2, 2019
Verified Purchase
Drain Hose not the same as pictured
The delivered drain hose had only one narrowed section for the top clamp on the side of the dishwasher. There were no narrowed sections on the hose for the other 2 clamps. However, these clamps can be expanded to fit over the hose to hold it in place. The original hose had 3 narrowed sections for the 3 clamps. Retrofit worked and machine is operational.
Kyle L - February 28, 2019
Verified Purchase
Worked but very expensive
The part was new. The instructional video was not very helpful. Considering it was just a hose, $80 is way too much.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Drain hose was leaking.
Switched circuit breaker off.
Removed kick panel.
Removed the dishwasher from counter.
Disconnected drain hose from the pee trap.
Disconnected drain hose from pump.
Installed new drain hose.
Reinstalled dishwasher in counter.
Connected hose at the pee trap.
Turned power back on. test for leaks by running a cycle.
Reinstalled kick panel.
Removed kick panel.
Removed the dishwasher from counter.
Disconnected drain hose from the pee trap.
Disconnected drain hose from pump.
Installed new drain hose.
Reinstalled dishwasher in counter.
Connected hose at the pee trap.
Turned power back on. test for leaks by running a cycle.
Reinstalled kick panel.
Other Parts Used:
-
Jason from Lugoff, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
51 of 67 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher overflowed-assumed the problem was the float switch
-
Robin from Golden, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
20 of 58 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rubber sleeve at drain pump rotted out
The rubber elbow that connects the drain hose to the sump pump decomposed and it is part of the hose (glued together), so must change the entire hose. But, is easily done with the supplied instructions supplied by Partselect online when ordering the part. The part shipped quickly from stock and rec'd via USPS. It did not have some relief spaces where the hose mounted to the side of the cabinet through the mounting bracket, but still installed without issue and works fine without any further leaking at the joints.
Other Parts Used:
-
Jim from CENTEREACH, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Wrench (Adjustable)
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
December 7, 2019
Does this hose have an attached check valve?
For model number Kdte204epa2
Hello Chris and thanks for writing.
No, it has not it has an elbow attached. We hope this helps. Please contact us anytime.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Bryan
January 21, 2020
The drain hose states on the motor end connection not to remove the check valve inside.. does this elbow in fact contain the check valve ?
For model number WDT720PADH2
Hello and thank you for writing.
No, it has not it has an elbow attached. We hope this helps. Please contact us anytime.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ed
June 7, 2023
This has only one smooth section were the attachment goes. The original hose has three smooth sections. Will this make a difference on installation.
For model number 665110739120
Hello Ed, thank you for contacting us. According to our research, the drain hose, part number PS11753695, is compatible with your model. It will be easily installed in your washer without any problems. Also, we have attached a link to the video that can help you replace the drain hose. We hope this information is useful!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11753695
Manufacturer Part Number: WPW10358302
Manufacturer Part Number: WPW10358302
Brand
Model Number
Description