Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Noel
April 27, 2018
I set my oven at 350 degrees and a only reach to 100 degrees is this the right part for this issue?
For model number KERS206XSS2
Hi Noel, Thank you for the question. I suggest testing the Sensor, PartSelect Number: PS11753331. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
March 8, 2019
Oven very slow at heating (one degree every 5 - 10 seconds). Can use broil to gain temp, but system won't hold temp). Bake and broil elements have continuity and temperature probe checks ok at room temp (about 1090 ohms).This was a sudden problem.
is the culprit likely the ecu. thought i'd ask before ordering a $370 part or calling an appliance repair service.
For model number KERS206XBL2
Hi Jim,
Thank you for your question. Usually the issue is the temperature probe, but if you have already checked it and the oven elements, then the issue is likely the electronic control board and you will need to replace it. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
