The upper spray arm rotates and sprays water to clean the dishes inside the dishwasher tub. If your dishes are not being cleaned properly, you should check if there is an issue with the spray arm. To check your spray arm, make sure the spray arms can move evenly and freely on their bearing rings and mounting brackets. Remove your spray arm and check to ensure they are straight and undamaged. This spray arm is made of high-quality plastic and is just over 5 inches long.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Dishwasher Upper Spray Arm
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Maytag.
Part# WPW10327455 replaces these:
AP6019626, W10327455
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
3.5
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
1
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lyndsay B - June 30, 2023
Verified Purchase
Good but not enough
It looks exactly like the part I'm replacing however it doesn't come with the push in retainer clip that it needs to snap into. So after saving the part for two months to fix at my rental cabin I now have to wait until I'm back in another 2 1/2 months to finally fix it for good. I'm disappointed that the description didn't say that you might need the extra piece. Shipping was quick but the lack of information set me back.
★★★★★
★★★★★
Dan W - July 23, 2021
Verified Purchase
e.g. Easy Repair, Great Part - worked as expected!
e.g. The part was in great condition and came fast. My appliance is back in working order!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
December 26, 2017
What holds the upper rotating arm in place? I have snapped it back in place but it fell out during the next wash cycle.
For model number KDTE104DSS0
Hello Charles, Thank you for your inquiry. The upper spray arm is held onto the feed tube by a push in retainer clip, part# WP3400918. Hope this helps!
23 people found this helpful.
Was this helpful?
Thank you for voting!
Marie
March 29, 2018
Hi i asked a question earlier but did not get the answer i needed. I am looking to purchase the piece that connects the middle sprayer arm to the dishwasher. If you look at the diagram you provided for the spray arm part, you will see there is a piece that screws on. (its actually 2 pieces. One sits inside the other) it’s near the “#6” on the diagram.
For model number MDB5969SDE0
Hi Marie,
Thank you for your follow up. Do you mean part number 6 is what you are looking for? If so I have listed that part in a link down below for you. The parts are also listed underneath the diagram information on your model as well, if that helps too. The middle spray arm itself connects to the manifold. Which is part 4 in the diagram. I have listed that part down below as well. I hope that helps. Good luck with your repair.
Small spray arm keeps falling off; how does it install
Hello Raven, Thank you for the question. The small upper spray arm is held onto the feed tube by a push in retainer clip, PartSelect Number PS11741622. We Hope this helps!
The spray arm that attaches to the top rack has broken (3 of the clips on the square part that attaches the arm) and I am looking for the correct part number to replace it. The arm has 4 part numbers printed on it and i need the correct one to use. The 4 part numbers are w1048645(gs), w10448616(gd), w10448617(gn), and w10453933(jg).
For model number WDT730PAHZ0
Hello Bobby, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11754873. Hope this helps!
This part came off when we pulled the upper tray out to empty it. How can we put it back in tight?
Hello Ken,
Thanks for your question. You will need to push it back into the retainer clip which holds it into place normally.
I hope this helps.
Was this helpful?
Thank you for voting!
Marie
March 29, 2018
Does the spray arm come with the attachment pieces? And can they be purchased separately?
For model number MDB5969SDE0
Hi Marie,
Thank you for your question. This part is just your upper spray arm, it does not come with any of the other parts. You should be able to reuse what you have but if you need the other parts as well for your upper spray arm, I have listed the part in a link down below for you. Good luck with your repair.
The model number I gave above is my Whirlpool dishwasher model number. My question is about my small upper spray arm part number is ps11752935. I have always felt it does not spray out wide enough because it is only 5 inches long so my dishes in the top rack don't get cleaned well. I want to know is there an alternative long spray arm like the one at the lower level of my dishwasher that can replace that 5 inch one? I've got to replace both the lower and upper arms anyway, so I'd like to put a longer arm at the top of my dishwasher if that kind of alternative will work up in place of that 5 inch one.
For model number WDT710PAYW6
Hello Beverly, Thank you for contacting PartSelect.com. Very sorry, we only list the original OEM parts that came with the appliance. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps.
Was this helpful?
Thank you for voting!
CHRISTA
October 1, 2017
I need to replace w10327455 for my Whirlpool dishwasher model: W10632081a. Will this part work?
For model number W10632081A
Hello Christa, thank you for contacting us. The correct part for your model is w10327455 It would be best to use the correct replacements for your model to avoid any issues. Good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
