Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Eli
July 2, 2019
I have an Amana dishwasher, model ADB1400PYW1, the soap dispenser cover is not closing any more. Which part do I need to buy and how do I install it? Please help!
For model number ADB1400PYW1
Hi Eli,
Thank you for your question. If the cover is no longer closing, then you will need to replace the dispenser. The part number listed under your model number for the dispenser is PS11752407. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
April 5, 2019
Dispenser cover is broken
For model number WDF310PAAS4
Hello Joe, Thank you for the question. The lid is only sold as part of the Dispenser, PartSelect Number PS11752407. Hope this helps!
Was this helpful?
Thank you for voting!
Robert
November 12, 2019
The door on my soap dispenser broke and i think there is a spring involved. Is it possible to replace the dispenser door and spring only without having to buy the whole dispenser?
For model number Whirlpool Dishwasher WDF310PAAB4
Hello Robert, thank you for your question. Unfortunately, the door is not sold separately. The whole dispenser would have to be replaced which is PartSelect Number: PS11752407. Good luck with your repair!
Was this helpful?
Thank you for voting!
Yvonne
October 11, 2022
We purchased the dish soap/rinse aid part for my dishwasher and installed it as instructed. However now we have water leaking from around the dish dispenser, what would be the cause of this?
For model number ADB1100AWS2
Hi Yvonne, thank you for contacting us. If your dishwasher is leaking water, you will need to check the water supply line for leaks or breakages. Ensure that the water line is installed correctly. If your dishwasher is not level on the surface, it could also cause leaking. You will need to check the water inlet valve, part number PS12578165, for leaks. If your dishwasher's door gasket is soiled, it may prevent the door from sealing properly and will cause a leak. We hope this information helps.
The clip to hold the door broke do we have to buy the whole thing
For model number 66513073k214
Hello Justin, thank you for reaching out. Yes, you would need to replace the whole dispenser assembly, part number PS11752407, as the door clip is not sold separately. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Francisco
May 4, 2023
looking for replacement for detergent dispenser. Latch is broken
For model number kenmore 66513572k700
Hi Francisco,
Thank you for your question. The part number for the detergent and rinse aid dispenser is PS11750654. We hope this helps!
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Soap dispenser door catch broke off
1. Disconnected power chord. 2. Removed panel front (8 screws). 3. Taped rubber protector away from dispenser. 4. Removed dispenser mounting screws (6 each). 5. Disconnected two wire cable connector (note: depress small catch on connector to release. 6. Remove old dispenser assembly and install new. 7. Make sure rubber protector sheet is in place before tightening screws. 8. Reconnect two wire cable. 9. Reinstall panel front. Second person helpful to hold panel in place. 10. Reconnect power chord and your ready to go.
Other Parts Used:
Roger from Idaho Falls, ID
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
27 of 30 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Denis P - October 14, 2020
Verified Purchase
Perfect fit part
The part was new and an exact fit for my appliance. Shipping was super fast and the instructions were simple to follow. Overall it was a great positive experience and would recommend this site for any home appliance repair.
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752407
Manufacturer Part Number: WPW10300737
