The adjuster cover goes on the outside of the adjuster housing. It is used to support the height adjuster and also protects the internal components of the adjuster housing.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Serge E - January 22, 2019
Verified Purchase
Easy and quick repair
The part arrived a few days after I ordered it. I was able to repair my dishwasher easily.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My upper rack, even after replacing the upper rack tracks, would pivots forward or backward out of the horizontal.
It was easy to remove the old parts by using a screwdriver to push in “tabs” that kept retainer clips in place. Once removed, it was a matter of easy assembly in reverse and then re-clip. It became clear that the problem was because a few tabs that click into the sliding track and worn to the point where they no longer retained a tight connection to the track causing the upper rack to tilt with weight to front or back. Sure, the parts are a bit pricey but not when compared to a repair visit or a new KitchenAid which otherwise was functioning perfectly.
Take out the upper dishwasher rack. Place the adjuster towards the back of the upper each place attachment clips to secure adjuster and the adjuster clips to the back of the housing. Check to back sure adjuster move up and down and click back into place. Your installation is complete. Good luck!
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
November 7, 2017
Parts ps11756592 and ps11751101 are part of the housing that adjusts the rack up and down. The one on the right side of our dishwasher is not working. There is definitely a left and a right so i am wondering what the part number is for the right side on the upper rack. Thanks
For model number KDFE204EWH0
Hi Wayne,
Thank you for your question. This part is actually the same on the left and right hand side of the rack. The part that it attaches to has a left and a right side. Those are parts: PS11756592 and PS11756593. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
June 4, 2019
Upper rack item 2. Available?
For model number 665.13699n412
Hello Bill, thank you for inquiring. That is the Housing part PS11750053. The availability of the part is listed next to the 'Add To Cart' button.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steve
July 2, 2021
Where is the mail fuse for the unit, and can it be replaced by removing the front cover?
For model number KUDE70FXSS5
Hello Steve, Thank you for the question. The fuse is only sold and replaceable with the Dishwasher Electronic Control Board. The fuse its self is part of the Board. We hope this helps!
Sold individually.
This dishrack adjuster is for dishwashers.
Dishrack adjuster lets you change the height of the dishwasher's upper rack.
Wear work gloves to protect your hands when installing this part.
Also known as rack adjuster. Sold individually.
This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip holds the adjuster ...
This is the replacement adjuster housing for your dishwasher. It is made of gray plastic and is approximately 4X4 inches. The adjuster housing clips into the dish rack and allows you to adjust the height of the rack. Bec...
