Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pamela
September 9, 2019
I have anywhere from 1 to 4 lights flashing on control panel. The heat dry/lock light flashes then goes off momentarily. The normal cycle light flashes when pressed. The cancel light flashes when pressed as does the start/ resume light. I have turned off the appliance at the breaker to reset without success. I have used a hair dryer in an attempt to unstick the panel buttons. I assume i need a new control panel.
For model number KUDS30IVWH3
Hi Pamela, thank you for your question. There are two parts to check when having an issue like this. Your Control Panel (the part with the buttons), and your Control Board (basically the brain of your appliance directly behind the control panel.). I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
PATRICIA
September 21, 2017
I'm trying to find a control panel/board for this dish washer. I'm not sure if its the control panel or a belt that i need. Every once in a while the dish washer will work but the majority of the time you can't push the button. The four hour relay button will flash.
For model number KUDS301VBL4
Hi Patricia,
Thank you for your question. If you are looking for the black control panel, this would be the part here. I have linked the part information for your electronic control board down below for you. Good luck with your repair.
Two lights blinking on control panel won't start can't get lights to go off
For model number KUDS301VBL3
Hello Don, thank you for inquiring. For this symptom you will want to replace either the Bi-Metal Fuse part PS2360984, the Door Switch part PS11745501, or the High Limit Thermostat part PS11743423. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
