Control, Electric

2 questions: Drum wobbles a lot, and makes noise, then it trips the spin control so that we have to unplug the machine overnight for it to reset itself. If you where to unplug it for only an hour or so,when you turn on the power and move the selector to drain / spin, the door locks followed by a click (in the back of the machine?) then nothing.Is it a central control unit (ccu) ? if so what is the part number for there are two(2) as i see it part #3 & part #6. as for the out of balance of the drum, how many shock absorbers are there, found one in the back by the drum motor, are there others? perhaps springs ? awfully wobbly when starting the spin cycle thanks

Sorry i'am french but i tried to do my best to explain my problem.I buy this washer brand new but i only use last year.The problem is i push power,select,start pause,temp. And after the washer start to work on status ,add garment and the washer to work but after few minutes the bell is earing .The washer stop to wash.It don't do rinse,and the spin.If i use the botton push and select and push the botton rinse and spin it work very well.

Sorry i am french but i tried to do my best.To explain the problems.This is what i do when i start the washing.Push to select and choose normal.And buttom cold.After start and lights open at add garment and after it goes to wash but it stop is not continious the program.If i use the bottom push to select and choose rinse&spin or drain&spin it work very well.The first time after question about the problem i order same problem .So i explain again the problem and i order wpw10212764 no difference the same problem .Can't you help me on my request .Thanks for helping me sincerly jean-guy.

water cycle does not finished at the beginning when I started the washer, water stops 4-5 seconds after I pushed the start bottom. a technician came to checked out washer, but couldn't figured it out. he is just guessing.