Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The controsl on my Triple Cool Climate control were not responding. I could not turen off alarms or change temperatures.
First I removed the plastic light shield. That snaps into place. Next I removed the plastic facade which snaps in from behind. It has plastic mounting points, I had to use a long straight screwdriver to do this. Then I unplugged the old board and replced with new.
Other Parts Used:
Ricardo from Whittier, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
55 of 93 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
15 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
June 17, 2019
I cannot change the temp settings or any other function on the touch pad. Will
Changing the board fix this, or do i need to replace the touch strip?
For model number JBR2088HES
Hello Tim, thank you for writing. The issue could be with either one of them. This Electronic Circuit Board part PS11750388 and Keyboard part PS11743626 are the correct replacements for your model. We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Don Gould
December 19, 2019
Our refrigerator stopped working, freezer food was thawing and main fridge was warming, , etc. 8 hours later it went back into operating mode, freezer getting cold, ice cubes being produced. 8 - 10 hours later it shut down again and then 8 hours later was back to cold and freezer mode. Does this sound like an electronic circuit board issue? Thanks, don
For model number JFC2089HES
Hello Don, thank you for your question. There are a few parts we would recommend testing before replacing the board. We would recommend testing the defrost heater, thermostat, run capacitor and start device. If those parts test fine, the board would need to be replaced. I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Eric
February 4, 2020
Hello, the problem that i'm having is that the refrigerator side is getting too cold. The thermistor appears to be relaying the temperature to the user control and display board since the temp is accurate on the board. But, it's set to cool to 38 degrees and it's going well past....usually to 22 degrees before the damper closes. the damper seems to be in good working order as i've witnessed it opening and closing just not when it should be. my question is could it still be the thermistor even though the display is reading an accurate temp? also if i have to replace one of the control boards i've gotten conflicting advice as to whether it's the user control display board i should be changing or the main control board located behind the dispenser. lastly am i correct in thinking that as long as the damper is opening and closing completely without obstruction that it's working correctly or is there "brains" to this piece of hardware that could be malfunctioning? thankyou
For model number Jcd2295kes
Hello Eric, thank you for your question. Yes, the thermistor might be the issue even though the display is reading an accurate temperature. I would recommend testing the thermistor first. You can test the Thermistor to see if it is defective.The resistance of the thermistor in the unit should be 2.7K ohms at 77 degrees. If the thermistor reading is accurate the issue could be with the damper control. If it is opening and closing, but randomly, this could be the issue. Most customers replace both the thermistor and the damper control to fix this issue. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sandra
June 3, 2019
Does this part work for a 10 year old kitchen aid refrigerator?
For model number W10207861
Hello Sandra, thank you for writing. We would be happy to look into this, but we will need the model number of your refrigerator to do so. We look forward to hearing back from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sandra
June 3, 2019
Will w10207861 work for this model of kitchen aid?
For model number KBFS20EVMSO
Hello Sandra, thank you for asking. Yes, this is the replacement for your model.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bill
August 30, 2019
Is this part number wpw10207861 for my frig.
For model number KBFA25ERSSO1
Hello Bill, thank you for inquiring. Yes, this is the correct replacement for your model. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Laird
March 6, 2023
Freezer is going below zero (-15). Any ideas how to correct this?
For model number 596.76533500
Hello Laird, thank you for contacting us. We would recommend you check the following parts: thermistor, part number PS2003772, and defrost thermostat, part number PS11743535. If it does not solve your problem, you need to check your control board, part number PS11750388. We hope this helps.
I replaced the strap up capacitor, compressor start device and the defrost themostat. The refrigerator and frezzer and just warm. The fans are working both upper and lower, the refrerog section vent/valve on top open and closes (cold air from the freezer), the compressor starts and hum feels warm to the touch and little hot. I can adjust the temp controls and alarms seem to work. But the entire seems to just sit there with no cold/freezing. Need help with parts suggestion. Thermistor and /or control board are the last two items..
For model number MBF2562HEW
Hello Rob, Thank you for contacting us. At this point I would suggest checking PS2003772 Thermistor, and PS11750388 Electronic Circuit Board. You are correct, these are the last two options. Good luck with your repair.
Was this helpful?
Thank you for voting!
John
June 27, 2023
Maytag mfd2561hes frig.wont defrost already replaced t stat .
But when I try to put in defrost as per paper work. Nothing works can't change temp.setting.will circuit board on inside of frig replace it should solve defrost issues also .heater omh out ok .thinking board doesn't respond to anything what board is this thanks
Hi John, thank you for getting in touch. Your refrigerator may be facing this issue because of a faulty control board, PS11750388. We hope this information helps!
Was this helpful?
Thank you for voting!
Anthony
November 18, 2019
Our refrigerator/freezer temperature read outs were all over the place and refrigerator was warm. We had repair man out. He defrosted refrigerator and said computer board needs to be replaced. He then told us the board is no longer available and that the one we have will have to be rebuilt. Will the one from your site work with our refrigerator? Thank you.
For model number 596.76532500
Hello Anthony and thanks for writing.
Yes. Part Number: PS11750388 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
