This bake element is found on the bottom of the oven.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when baking | Oven not heating evenly
This part works with the following products:
Wall Oven, Range, Microwave Oven Combo.
This part works with the following products:
KitchenAid, Whirlpool, Maytag, Crosley.
Part# WPW10207398 replaces these:
AP6017075, 9760768, W10207398
Customer Reviews
Average Rating:
★★★★★
★★★★★
38 Reviews
4.9
Filter By Rating:
5 Stars
35
4 Stars
2
3 Stars
0
2 Stars
1
1 Star
0
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Cody G - July 2, 2019
Verified Purchase
Great experience with partselect.ca
Typically i dont write alot of reviews but partselect.ca deserved one for this order. My local parts warehouse didnt have the element for my oven i needed so i tried partselect. Online ordering was easy and the part came in the next day even though i was expecting 3 to 5. Great great experience... please pass on the kudos. - Cody
★★★★★
★★★★★
Michael W - April 12, 2021
Verified Purchase
Easy order, correct part, shipping confirmation same day ordered
Part was correct one ordered, arrived in perfect shape 3 days after ordering. Well done.
★★★★★
★★★★★
Rajinder S - May 26, 2020
Verified Purchase
Worked as expected.
Excellent quality and fast delivery ??
★★★★★
★★★★★
Lucas G - January 15, 2021
Verified Purchase
Repair went well, Part is perfect
We received the part to repair our double oven. The lower burner went out and then the top burner went out afterward. We ended up buying two replacement burners same part number and swapping them out. The oven has been working perfectly since. also, the repair guy was surprised at the amount paid for the part and claimed he couldn't get it much lower himself.
★★★★★
★★★★★
Robert V - January 17, 2021
Verified Purchase
exact part excellent service
the part was correct
★★★★★
★★★★★
Carmelo B - September 30, 2021
Verified Purchase
KitchenAid bottom burner element
The part was shipped super fast, the only issue is that the transport company damaged the element but after calling customer service a new part was shipped the very next day with no hassle, great product and great customer service thanks
★★★★★
★★★★★
Ron F - March 13, 2021
Verified Purchase
Satisfied with Product
Arrived promptly and easy to install when reviewed comments from other purchasers how to install.
★★★★★
★★★★★
Nelia A - March 15, 2021
Verified Purchase
Element bake
Was five weeks back order but worth the wait thank you
★★★★★
★★★★★
Paulette A - September 4, 2020
Verified Purchase
Bake element
It works fine.
★★★★★
★★★★★
Ritchie M - April 18, 2024
Verified Purchase
Received partly quickly, installation went well…. Happy family here. Thank you for good service
All is well
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 1.4 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Corroded bake element
Pull it away from the wall and take everything off the back. Unscrew the element cover, cut through the insulation and remove the part. Not easy, watch for sharp sheet metal edges
Other Parts Used:
Tim from Langley, WA
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Bake Element
The existing bake element was charred and in pieces so could not be pulled out. We destructively disassembled the range and pulled out the pieces along with the melted insulation. The wall behind was also scorched.
Other Parts Used:
Gary from NELLYSFORD, VA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not getting hot enough
Turn off oven circuit breakers. Removed builtin double unit out from enclosure to access the back. Remove sheet metal covers to expose heating element electrical connections. Double Broiler element on top should read about 33 ohms and 56 ohms. One was open so it needed replacement. Bottom hidden element should read 28 ohms. It was open. Remove broiler element screws and replace it from the front. The hidden bottom element is difficult to get at. Remove 4 screws holding up a pan with insulation. Bend it down. Using scissors I cut a long slot through the insulation to access two center screws holding the element to a long metal strip and 4 screws holding this strip to the oven frame. The screws were tight, don't strip the heads. My element was broken and distorted, so little by little you coax it out the back. Attach the mounting strip to the new element with 2 screws and slide it back in. Then reattach the mounting bracket to the frame with the 4 screws. Easier said than done..... New elements fit perfect and worked good.
Ask our experts a question about this part and we'll get back to you as soon as possible!
23 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
May 6, 2018
The bake element for this model is not inside the oven. Where is the access for this hidden bake element? I'm assuming it's in the back. Can you explain how to access and change the element. Please do not provide a link to the same video - it's not applicable to this model. Thank you.
For model number KESS907SSS04
Hi Greg, Thank you for the question. For the hidden element, you will need to pull the appliance out from the wall to access it from the back. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Jimmy
August 12, 2019
Do you have instructions on installation of part w10207398 for the model kdss907sss05 ?
For model number KDSS907SSS05
Hello Jimmy, Thank you for the question. You will need to pull the appliance out from the wall to access the panel on the back of the appliance. Once the panel is removed you will need to move the insulation away and bend down a tin panel that covers the back of the element. Remove the wire connectors and element and reverse the steps to reinstall. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
February 27, 2019
I am trying to replace the bottom hidden bake element on my KitchenAid oven and cannot for the life of me figure out how i am suppose to get it out. I have pull a few covers off the back and found the 2 element prongs sticking out the back and disconnected the wires. I move some of the insulation out of the way exposing 2 screws apparently holding it in. But now it will not come out any further and i am wondering if it is suppose to come out the front or the rear of the oven somehow. The video you keep listing to help people does not apply to this particular model.
For model number KESS907SSS04
Hi Mark,
Thank you for your question. There is a video on our website that you can reference on how to install the bake element. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Earl
April 25, 2019
How to install bake element part# wpw10207398
For model number kebs107sss04
Hi Earl, Thank you for your inquiry. There is a video on our website that you can reference on how to install the. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
LOU
February 25, 2019
How do i remove oven rack : Ps 12348730 for cleaning
For model number KEBS207SSS00
Hello Lou, Thank you for your question. This is a slide out oven rack. You simply need to lift the rack slightly then pull it out of the oven. Have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Linda
October 14, 2017
How do you get to the heating element to change it
For model number KDRS807SSS04
Hello Linda, thank you for contacting us. The bake element would be the bottom heating element in the oven. It would be exposed and fairly easy to access. We have a how to video that shows how to replace this part, you can follow the link below, hope this helps!
https://www.youtube.com/watch?v=aahcHBzTrk8
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jean
October 27, 2017
How do you remove oven bake element to replace
For model number KESS907SSS04
Hi Jean,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
March 2, 2020
Is there a video available to replace the bake element for this model ?
For model number Kesk901sss01
Hello, Thank you for your question. You will want to first remove the screws from the back of the element where the bracket is, and then you should be able to just pull it out. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Russell
March 9, 2023
I have a KitchenAid model# KEBK206SBL04 serial number D14312624. Does this stove have a bottom element? The upper stove seems to not heat up properly. When cooking a pizza, the bottom doesn't get cooked, and the top usually gets burnt. If there is a hidden bottom element, I may have to replace it. If there is a bottom element is it difficult to replace it?
Thanks,
Russell
For model number KEBK206SBL04
Hello Russell, thank you for reaching out. We believe your oven is having this problem because the bake element may be faulty. We would suggest checking the bake element, part number PS11750370, and the temperature sensor, part number PS11748765. To access the bake element, you will need to pull the appliance out from the wall to access the panel on the back of the appliance. Once the panel is removed you will need to move the insulation away and bend down a tin panel that covers the back of the element. Remove the wire connectors and element and reverse the steps to reinstall. Thank you for your inquiry, good luck with this repair!
Do you have instructions on installation of part w10207398 for the model kdss907sss01 ?
For model number WPW10207398
Hello Yves, thank you for reaching out to PartSelect Canada. To install the bake element, part number PS11750370, you need to follow these instructions. Access the panel on the back of the appliance. Now move the insulation away and bend down a tin panel that covers the back of the element. Remove the wire connectors and replace the element. Reinstall the tin panel and its insulation. Place the appliance back in place. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This broil element is found on the roof of the oven. The broil element is at the top of the oven and supplies the heat to broiling. 14" x 15" with 1-3/8" inserts.
This part works with the following brands: Whirlpool, ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750370
Manufacturer Part Number: WPW10207398
