Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
GERALD B - May 29, 2019
Verified Purchase
Very good
Was the right part
★★★★★
★★★★★
Pierre R - March 5, 2019
Verified Purchase
repaired fast and easy
the part was ordered on a monday and i receved the part the next day. very fast and very efficient.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water and ice dispenser's were not working
Checked the water line from the wall to the supply port of the inlet valve and it was suppling water but no water beyond the water inlet valve, So I ordered a new inlet valve and installed, and it fixed the problem. Inlet valve supplies water to the ice maker and water dispenser filter housing. Partselect videos and you tube installation videos very helpful. Partselect troubleshooting guide also very helpful. Great company
Other Parts Used:
Enrique from CASA GRANDE, AZ
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker removal
Once the screws were removed from the bottom of the ice maker, the unit had to be removed forcefully because of the limited clearance and the support tray under it. The next difficulty was to disconnect the old wiring harness so that the new unit could be installed. Having completed this, the install was fairly easy and the job was completed successfully. By changing the supply valve, filter and ice maker all the problems were removed and the unit is working properly.
There was no water in the icemaker tray to freeze into ice cubes
Took off the rear cardboard cover, unscrewed the old valve, checked to see if there was enough tubing to fit if I cut the tubing. removed the 2 electric connectors, Cut the tubing 3, installed the 2 electric plugs, inserted the 3 tubes, mounted the new valve, replaced the cardboard cover. I checked for leaks, and very soon heard the valve filling the icemaker tray, and soon, Ice cubes again.
Other Parts Used:
Thomas from GRANT, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker not making cubes.
First off you need to shut off the water supply valve that goes to the icemaker. Next pull the refrigerator from the wall , thats the fun part. I did not unplug my refrigerator when I did this . You can to be extra safe. At the bottom on the back side remove the cardboard cover on the bottom like four or five screws and set this aside. The water valve is on the bottom on the right side. There are 3 water lines attached to it. Having a towel handy might be helpfull. 1 line supplys the water, 1 is for the water dispenser and 1 is for the ice maker. These are push in connections no wrench needed. Remove the 2 screws that attach water valve to frame. Arrange it to make removing the 2 wire connections and water lines easier to remove. Wire connections just pull off. Mark them as to what valve they go to. Next remove the water lines. you need to remove a plastic lock that insures that the water lines do not pop off, very simple. Next push down on the nylon connector push down on the top of connector and pull on the plastic water line at the same time and it will come out. Do this to all 3 water lines. Remove old water valve and install new one in the reverse order. The water lines just push in no need to mess with connector when line is in reinsert the plastic lock. Reconnect the power connections. Align the water valve bracket with screw holes in frame and reattach the 2 screws holding it in place. Now would be a good time to turn on the water and check for leaks. You can check water dipenser but ice maker has a mind of its own. If all is good reinstall the cardboard cover on the back bottom and push refrigerator back where it was. Make sure the water line is not kinked. Aftre a couple of hours the ice maker should start making ice.
Other Parts Used:
Robert from STRONGSVILLE, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inlet valve was broken at the water line connection
Changed inlet valve
Other Parts Used:
James from VANCEBURG, KY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud knocking noise coming from back of refrigerator when dispensing water. Very little flow. Problem was intermittent.
Shut off water supply. Unplug refrigerator. Removed lower back cardboard panel. Removed two screws holding inlet valve bracket to side frame. Pulled valve out far enough to gain access to water lines and electrical connectors. Used 9mm open end wrench to press in collars to remove water lines from inlet valve. Used small container to catch water dripping from lines. Removed defective valve and replaced with new one by first pushing water lines into respective openings, make sure they are fully seated. Reconnected electric wires. Installed inlet valve on side frame. Replaced back panel. Plugged in power cord. Opened water supply. Flushed about 2 gals of water through system. Note: water may not flow immediately due to air in water lines.
Other Parts Used:
Patrick from PALM COAST, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Felipe Campos
February 21, 2018
Will w10408179 water inlet valve work for my refridgerator?
For model number WRS325FDAM01
Hello Felipe, thank you for your question. Yes, the correct valve for your appliance is Water Inlet Valve WPW10179146. Good luck with your repair!
11 people found this helpful.
Was this helpful?
Thank you for voting!
G.
January 17, 2022
Will this part (water flow valve) resolve a water flow issue, present only when filter is installed? Meaning, water flows fine, when no filter is installed. Thanks.
For model number 106.51129210
Hi G,
Thank you for your question. If it has been more than 6 months since the water filter was changed, it may be clogged and it will need to be replaced. If you have recently replaced the water filter and you did not flush it, this may be a reason, why you are unable to dispense water from the refrigerator. If the water filter is on good working order, then you should check the water filter housing, the water inlet valve and the water tubing to see which part is causing the issue. We hope this helps! If you have any questions, please let us know.
Refrigerator is dispensing water but not making ice. Will replacement of this valve solve
For model number 10651335710
Hello Dan, Thank you for your inquiry. You can test the water inlet valve with a multimeter to see if it is causing the issue. We have included a link to our video on testing a water inlet valve and how to run a test on the ice maker. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Kelvin
February 5, 2020
What is the correct part number for the water inlet valve for the wrs325fdaw04
For model number WRS325FDAW04
Hello and thank you for writing.
The water inlet valve PS11749668 is in the list of compatible parts for your model. We hope this helps. Please contact us anytime if you require further assistance.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Nolan
July 23, 2021
My ice maker tray is frozen as a single sheet of ice instead of cubes. I have defrosted the ice maker which solved the issue a few times. However, it makes one or two batches of ice and then freezes in a single sheet again. This time, it has stopped dispensing water all together. Water does come out of the fridge and pressure is good. I do have a water filter that was just replaced and the freezer temperature is not too cold. I also have an additional water filter that filters water going into the fridge from the main water line. I am trying to figure out whether i need a new inlet valve or ice maker all together. Thank you
Hi Nolan,
Thank you for your question. When you replaced the water filter, did you flush the filter? It is important to flush the filter before using it. If the dispenser is not dispensing water and the ice maker is freezing over, depending on the type of refrigerator you have, you will need to check the water inlet valve, the ice maker, the dispenser control board, the main electronic control board, the defrost timer, the defrost thermostat, the defrost heater and the evaporator and condenser fan motors. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Felipe
February 21, 2018
I need water inlet valve, the correct part number is WPW10179146, will a W10408179 work for my model? Or does it have to be WPW10179146?
For model number WRS325FDAM01
Hi Felipe,
Thank you for your question. We can only guarantee that this part: WPW10179146, will work with your appliance. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
E
August 15, 2023
Hello! If our dispenser line is leaking but the ice maker line is fine, can I disconnect the dispenser side’s electrical connection and still use the ice maker side? I am wondering if those two solenoids are completely separate even though they’re attached to this same water inlet part? Thank you!!
For model number WRS555SIHB00
Hello E, thank you for your inquiry. According to our research, you can disconnect the dispenser side electrical connections and still use the icemaker side. Both the solenoids are different. By disconnecting the dispenser connection, dispenser water flow will stop. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paul
January 3, 2023
Does water inlet valve number WPW10179146 fit refrigerator model number WRS555S1HZ (Whirlpool) and is there a tutorial on changing the valve?
For model number WRS555S1HZ
Hello Paul, thank you for writing. Yes the valve PS11749668 you had chosen is compatible with your model. We have a video for a similar model that should be of some help for you. We hope this helps.
Was this helpful?
Thank you for voting!
Dana
September 27, 2023
My icemaker is dripping water into the ice bin. If I pull the bar up to shut the icemaker off, it stops dripping. When I pull bar down to resume making ice, it does not leak until after a few hours. What part do you recommend?
For model number WRS322FDAM4
Hi Dana, thank you for contacting us. Based on the description that you have provided, we would recommend checking the water inlet valve, part number PS11749668, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Burch
December 11, 2022
What inlet water value # to fit this model of refrigerator have water to frig ear water pump go on in ice maker but no water coming in to it?
For model number WRS322FDAM04
Hello Burch, thank you for contacting us. The water inlet valve, part number PS11749668, will work on your model and is the likely solution to the problem. We would also recommend checking the water line, part number PS993036. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
