Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
February 22, 2019
My Kenmore washing machine doesn't perform a cycle advance. When it starts, it usually stops with the tub full of water. I need to manually advance the selector to rinse settings and spins cycles to get the laundry to complete a full cycle. Therefore, i believe the selector switch is likely faulty. Comments?
For model number 11020912990
Hello David, thank you for your question. Since you are able to manually change the cycles from fill, to agitate, to rinse, to spin, the most likely issue causing that is the timer PartSelect Number: PS11742067. The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences. Good luck with your repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Carol
July 2, 2019
Cycle stops at rinse, doesn't drain, will only fill and wash. None of the other cycles work. Thanks
For model number 11028922791
Hi Carol, thank you for your question. I would suggest you check your lid switch assembly. That part may be malfunctioning just after your wash cycle so it will not go into the spin and drain. If that part is not the issue then you may need to look at your timer. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tracie
July 22, 2019
Hi, could you please help me figure out my washing machine issue. My washing machine won’t agitate properly on regular or delicate speeds but seems to work fine on heavy duty speed.
For model number 110.27892790
Hello Tracie, thank you for inquiring. You will want to consider replacing either the Agitator Directional Cogs part number PS388034 or the Direct Drive Motor Coupling part number PS1485646 for your model. We hope this helps!
Was this helpful?
Thank you for voting!
James
February 19, 2018
The washer fills top level on all settings, the control knob on console, doesn,t say low med and high, it says light soil normal soil and heavy soil. Why would it fill to full on all settings, thanks for your help.James e.
For model number 110.29822801
Hi James,
Thank you for your question. If you are setting your washer to different water settings and you are getting a full load, then you will likely need to replace the water pressure hose. This is the hose that tells your appliance if your tub is at the desired water level. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Mark
January 9, 2019
My washer overfilled with water. I tried to turn the knob and advance to the spin cycle and pump the water out, but it would not spin. Is there something wrong with the cycle select switch? How can I get my washer to spin?
For model number 110.26832690
Hello Mark, Thank you for the question. You can first try to test the Pressure switch, PartSelect Number PS3408073 for continuity. This part is able to sense the water level in the tub. When the water reaches the desired level, this switch stops the water from flowing in the tub and the washing program begins. You can also check the hose going to the switch for blockages. Hope this helps, good luck with this repair!
We set the cycle selector switch, but when the machine starts it is agitating and then we hear it start to fill. When it is done it doesn't appear to have removed as much of the water as it used to.
For model number MVWC6ESWW
Hi Vickie. I recommend getting a multi-meter and testing the cycle selector switch, door switch ect;. Thank you for your question and good luck with your repair.
Was this helpful?
Thank you for voting!
Perry
February 12, 2020
Washer doesn’t always spin the clothe dry, sometimes I have to put it through a second spin. Also when the washer is agitating it is very noisy loud knocking sound the washer is level and all the springs are in place
For model number MVWC300VW1
Hello Perry, Thank you for the question. We suggest checking the Clutch Assembly for wear or damage. We hope this helps.
My washer is doing nothing when I turn it to the cycle I want and pull out the knob. What could be wrong with it?
For model number MVWC300VW1
hello Heather, Thank you for the question. This could be an indication the Washer Lid Switch is faulty. If your machine is having trouble starting, is not agitating, spinning, or is not draining properly, this could be because the lid switch has broken. We hope this helps!
My Amana washing machine will not come out of wash cycle and keeps draining while washing. Model number of machine is NTW4516FW3
For model number NTW4516FW3
Hello Jerry, Thank you for the question. This could be an indication the Timer Control Board is faulty and not moving through the cycles properly and may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Our washer only fills on hand wash. On any other setting, the machine begins to agitate with no water.
For model number WTW57ESVW
Hi Jim,
Thank you for your question. From what you described this could be an issue with either the timer or the lid switch. You will need to check both parts with a multimeter to see which one is causing the issue. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
