Whirlpool WPW10162384 - Door Gasket | PartSelect.ca
Door Gasket – Part Number: WPW10162384
Door Gasket – Part Number: WPW10162384 Door Gasket – Part Number: WPW10162384 https://partselectca.azureedge.net/Schematics/Maytag/42457.gif

Door Gasket

Your Price

CAD$84.01

PartSelect Number PS11749287
Manufacturer Part Number WPW10162384
Manufactured by Whirlpool

This oven door gasket comes with built in retaining clips.

This part works with the following brands: Maytag, Jenn-Air, Magic Chef, Whirlpool, Crosley, Admiral, Amana, Kenmore, Norge, Hardwick, Litton.

This part works with the following products: Range, Wall Oven, Microwave Oven Combo.

This part fixes the following symptoms: Oven not heating evenly | Door won’t close | Little to no heat when baking | Touchpad does not respond

Videos For installing this part.

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Customer Repair Stories

Average Repair Rating: 4.1 / 5.0, 15 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lori from Scottsdale, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
WPW10162384
Needed to replace oven door gasket.
First removed the old gasket using a needle-nose pliers. Then placed new gasket by inserting the little clips on the gasket. Took 5 minutes. Great instructions from Repair Forum.
55 of 66 people found this instruction helpful.
Was this instruction helpful to you?
David from Bexley, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPW10162384
My wife destroyed the oven door seal with oven cleaner...
I ordered the part one afternoon. It arrived before noon the next day. Then I simply removed the old seal (with about 2 dozen spring clips). Inserted the new part by carefully inserting the new seal into its corresponding hole at each end and then worked my way around the seal while inserting each attached spring clip into its corresponding hole.
13 of 15 people found this instruction helpful.
Was this instruction helpful to you?
David from Green Lane, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPW10162384, WP74010750, 12001656
oven would not come up to temp. that was set
Replacing the sensor kit and door gasket was no problem at all, however the baking element was A different story.
The problem was not the fault of the replacement part, but
the removal of the element to be replaced. The phillips head screws stripped out very easy and getting them out without damage to the interior finish of the oven was time consuming and challenging, but patients, and perservrance
win and so did I. Oven now works great
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Randall from Katy, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
74003320, WPW10162384
Inner Galls on door was craked
Remove outer panel first, outer glass and handle come off as one piece. Be carefull to secure as last screws are removed. Remove inner silver panel. Remove broken glass and replace with new. Reaassemble. Around 10 Phillips head screws altogether. Much easier than I thought
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
John from Ashland, OR
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
WPW10162384
Oven would stop heating after a few minutes of operation
Heat escaping from the top of the over door would overheat the electronics and cause the system to show error codes F1 and F3-1. Error code F3-1 suggests that the oven temperature sensor was bad. I replaced the sensor but that did not stop the problem. Replacing the oven door gasket stop the heat leak and solved the problem. I simply pull the old gasket off the door (it stuck a bit at the bottom but a pair of pliers solved that problem, then push the new gasket into place without any tools. The old gasket was very hard and non-complient where food had spilled on it and baked hard.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Harlen from Spring Creek, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPW10162384
Door gasket was hard and brittle from baked-on grease - heat leaking around door
Waited for my husband to do it, but when he didn't, I tried it. Very simple! Just pulled the old gasket out of the pinch pin holes in the door, then replaced it. Tuck the one end into the hole at the bottom of the door, then match up the little pinch pins on the gasket with the holes in the door - matches up perfectly! Be sure to tuck in each of pinch pins till they sort of "snap" into each hole. Took me 5 minutes, tops. Works great now, no more lost heat around the edge of the door.
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Ulrica from florence, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPW10162384, WP71002111
Filter was coming apart, door gasket was dirty and fraying
Opened the range grid, popped in the new filter, seconds after that I pulled out the old door gasket, put in the new with its little poppers and that's it. Both jobs took me less that 3,minutes. Great.Easy install for both products.
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Brian from Lakewood, CO
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers
Parts Used:
WPW10162384, WP7407P182-60, 12400043
Oven door hinges broken
With the back removed, replacing the lamp receptacle is straight-forward. Likewise, the door gasket is very easy. However, in order to replace the hinges, you have to remove the burner glass top (screws underneath the front lip), and inner and outer side panels. Also the supplied hinges mounting holes were not threaded so I had to use my own bolts, lock-washers and nuts in order to attach them. Total time, including a bit of cleaning, was 5 hours.
4 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Rob from Yakima, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPW10162384
door seal contaminated by a boil-over, not flexible
From reading other reviews i thought I would have to dis-assemble the door but when I saw the new part I realized I would not have to, simply pop the beveled clips w/pocket knife and pop in the new seal clips. the ends tucked very nicely, an 80+ yr. old would have no trouble if they had their wits.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Daniel from Katy, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPW10162384
Needed to replace the oven door gasket/seal
Removed door from oven by pulling up at the first stop point after opening the door. Removed the outer shell by removing 5 screws. Disassembled the inner door by removing 6 screws. Be careful with the insulation blanket (fits in a molded portion of the inner door). Glass windows can be removed (for cleaning) via a couple screws. Old gasket/seal is held in-place via spring-clips; just squeezed each clip, pushed each thru their respective holes, and pulled off the worn-out gasket. New gasket snapped in-place by pushing the clips thru the respective holes. Reverse the process to reassemble the door. You can do this job in 15-20 minutes. Took us longer because it took some elbow-grease (and patience) to clean the crud off the glass windows.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
12 Reviews
4.8
out of 5
Filter By Rating:
  • 5 Stars
    10
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Kenmore
22-98002
Range - Kenmore Range/Stove/Oven Model 22-.98002 (2298002, 22 98002) Parts
Kenmore
22-98009
Range - Kenmore Range/Stove/Oven Model 22-.98009 (2298009, 22 98009) Parts
Magic Chef
3422PRA
Range - Gas
Magic Chef
3422PRW
Range - Gas
Magic Chef
3422PVA
Range - Gas
Magic Chef
3422PVW
Range - Gas
Magic Chef
3428PVA-D
Range - Gas
Magic Chef
3428PVW-D
Range - Gas
Magic Chef
3442SRA
Range - Freestanding, Gas
Magic Chef
3442SRW
Range - Freestanding, Gas
Magic Chef
3442XRA
Range - Freestanding, Gas
Magic Chef
3442XRW
Range - Freestanding, Gas
Magic Chef
3448SRA
Range - Gas
Magic Chef
3448SRW
Range - Gas
Magic Chef
3448STA
Range - Gas
Magic Chef
3448STW
Range - Gas
Magic Chef
3448XPA
Range - Gas
Magic Chef
3448XPW
Range - Gas
Magic Chef
3448XRA
Range - Gas
Magic Chef
3448XRW
Range - Gas
Magic Chef
3448XTA
Range - Gas
Magic Chef
3448XTS
Range - Gas
Magic Chef
3448XTW
Range - Gas
Magic Chef
3458KVW
Range - Gas
Magic Chef
3458SVA
Range - Gas
Magic Chef
3458SVW
Range - Gas
Magic Chef
3458XVA
Range - Gas
Magic Chef
3458XVB
Range - Gas
Magic Chef
3458XVS
Range - Gas
Magic Chef
3458XVW
Range - Gas