Washer Suspension Spring Retainer WPW10145155

Hi Allan, Thank you for your question. The suspension spring retainer is located near the bottom of the tub assembly and there should be one of these spring retainers for each of the suspension springs. I hope this helps. Thank you and have a great day!

Hello, thank you for your question. Yes, your unit should have one suspension spring retainer for each suspension rod. The retainer holds the suspension spring in place while the washer is operating. If you notice movement, or an unusual noise or shaking of your washer when it is in use, it could mean that the suspension spring has been disconnected because of a broken or missing spring retainer. You will find the suspension spring retainer at the bottom of the tub assembly. To replace the retainer, use a pair of pliers to disconnect the suspension spring from the chassis mount to relieve the tension. Then, remove the spring from the retaining clip, and remove the retaining clip from the bottom of the washer. Attach the new retaining clip to the bottom of the washer, reattach the spring, and stretch it slightly so it can connect to the chassis.I hope this helps!