Washer Water Inlet Valve with Thermistor Specifications
This part is used to help control and balance the water temperature flowing in to the washer tub.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Washer Washer Water Inlet Valve with Thermistor
Troubleshooting
This part fixes the following symptoms:
Leaking | No hot or cold water | Water Filling Issues
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, Maytag, Amana.
Part# WPW10144820 replaces these:
AP6015761, W10144820, W10311458, WPW10144820VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
47 Reviews
4.9
Filter By Rating:
5 Stars
43
4 Stars
3
3 Stars
0
2 Stars
0
1 Star
1
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lea Anne M - April 7, 2020
Verified Purchase
Easy repair, good quality
Very pleased, prompt delivery, easy repair
★★★★★
★★★★★
Patrick S - January 23, 2021
Verified Purchase
Exactly as the old one
arrived fine and is working great
★★★★★
★★★★★
Andre C - November 26, 2019
Verified Purchase
piece arriver tres rapidement
site internet facile a utiliser, pieces parfaite et arriver tres rapidement en dedans de 30 hre.. tout a ete parfait!..
★★★★★
★★★★★
Pierre D - April 23, 2022
Verified Purchase
Fast and easy !
First, you have to see the video, it will make your life easyer. Then, in about 20 min, and with 3 common tools in hand, you're done. Part fits exactly, it's not close, it's perfect ! It is money well spendt to take care of your machines. Next ones might not be as easy to repair.
★★★★★
★★★★★
Alexis P - January 18, 2023
Verified Purchase
Good Quality
Fast shipping easy repair .
★★★★★
★★★★★
Brian Z - December 3, 2019
Verified Purchase
Easy repair, great part. Works as expected.
The part was in great condition and arrived very quickly. Washer is working great.
★★★★★
★★★★★
Bryan S - August 11, 2023
Verified Purchase
Easy fix
The part came really quick and fixed the issue of water leaking constantly and filling the drum. Just watched a short YouTube video and the repair took me 10 minutes to complete.
★★★★★
★★★★★
Michael S - June 12, 2021
Verified Purchase
Easy Repair
Part worked great. Quick delivery. I have a washer again!
★★★★★
★★★★★
Aldo P - October 25, 2019
Verified Purchase
Fast and reliable service
Part arrived 2 days after ordering it! No complains, perfect match!
★★★★★
★★★★★
Paul-Andre D - October 22, 2019
Verified Purchase
Pièce compatible
La pièce était identique à l'ancienne et a été facile à installer
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 20 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
fill valve bad
took back off then removed valve replaced with new one works good
Other Parts Used:
Barb from Blackriver Falls, WI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
126 of 187 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water would not shut off from running in to washer
contacted "just answer" on web. they diagnosed problem and suggested repair part. Ordered part from "part select". Great service and fast shipping from part select. Replaced part in 15 minutes and up and running! :)
Other Parts Used:
Melanie from Farmersville, OH
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
70 of 80 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water would not stop filling and would overflow flooding floor
replace part, which we received within one and half days and it works great. very satisfied
Other Parts Used:
Patricia from Rose, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
36 of 54 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
PLASTIC intake froze causing a cracked in the hose thread input connection
Removed the back washer panel,unscrew the control/dial panel section from main washer body, remove part. Insert new part and put everything back in place. Really quite simple. DONE.
Other Parts Used:
Kathleen from Live Oak, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
32 of 57 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No hot water
Easy, used youtube video for repair info.
Other Parts Used:
Lee from STATE COLLEGE, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
12 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tub would not stop filling with water.
Remove the front cover. Remove the old. water inletvalve and replace with the new valve. took me about thirty minutes.
Other Parts Used:
JUAN from HARLINGEN, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water would not shut off.
Followed the online video.
Other Parts Used:
James from SPRING HILL, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Cold Water
Be careful to make it a point to remember how you take things apart and in what order. If you have a cell phone take pictures as you go so you can refer back if you forget how something was. From the back of your washer, you will find two Phillip head screws, one on the left and one on the right, which hold the top controls panel in place, back these two screws out until the panel becomes disconnected. Remove the four nut driver screws from the back panel, two at the top, two at the bottom. At the top of the washer under the loosened control panel you will see two brass finished snap brackets. Pop these loose with a screw driver, lift up the back panel slightly, note how it is held in place at the bottom so you can get it back in place correctly when reassembling. Now you are in! Unplug the old unit and pop it off the panel. Plug in the new one and reverse the way you took it all apart. Hope this was helpful!
Other Parts Used:
Steven from LEWISTOWN, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water stopped coming in and stopped filling
Took back off washer, changed part, plugged back in and turned on, works like new
Other Parts Used:
christine from ONEONTA, NY
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
6 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very little hot water was the problem
I followed the video you guys sent me. You guys and woman are the best!
Ask our experts a question about this part and we'll get back to you as soon as possible!
32 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
December 2, 2017
After final rinse cycle, there are drips of water entering the tub from somewhere in top portion of the back of the tub. If left for a long period of time, the tub will fill with water. Not good, if you’re gone for a length of time. Would probably have to turn off the hot and cold water at the shut off valves to be safe. I am assuming that the water inlet valve is bad. Would you agree with that assumption?
For model number XXRTW4440VQ
Hi Bill, Thank you for the question. Yes I would agree that you need to replace the valve. This is a common symptom with defective water inlet valves. Hope this helps!
32 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
December 26, 2017
Hi when i turn the washer on and set it to cold it will not fill but set it to hot and it works started after i took the screens out to clean them.
For model number RTW4440VQ2
Hi Mark,
Thank you for your question. It sounds like you will have to replace your water inlet valve. The screens inside of the valve are actually not supposed to be removed. Because then you run the risk of debris getting inside the solenoid and jamming it up. I hope that helps. Good luck with your repair.
29 people found this helpful.
Was this helpful?
Thank you for voting!
Amanda
August 14, 2017
This problem didn't start until i cleaned the screens on the hose and removed the inlet strainers on the washer, now my washer won't stop filling with cold water
For model number WTW5200VQ2
Hi Amanda,
Thank you for your inquiry. Based on the information you have provided, it sounds like you may have to replace the water inlet valve with thermistor as there may be an issue with the screens. I hope this helps. Thank you and have a great day!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Wendi
April 15, 2018
Hi, i have a Roper wpw10144820. The water has a slow drip into the washer when it's not in operation. It looks like the inlet valve could be the issue, but i wanted to check with you first. Thanks in advance for your assistance!
For model number WPW10144820
Hi Wendi,
Thank you for your question. If the washer is leaking when it is not in use, then the issue is the water inlet valve and you will need to replace it. The reason this is happening is a part inside the water inlet valve has malfunctioned. I hope this helps. Thank you and have a great day!
9 people found this helpful.
Was this helpful?
Thank you for voting!
BILL
February 25, 2018
I have Admiral washing machine that is filling very slowly. I only have cold water for it, is there another inlet water valve for cold i can used? If yes can you give me part number?
For model number ATW4475XQ0
Hello Bill, thank you for your question. If the appliance is filling very slowly the Water Inlet Valve with Thermistor WPW10144820 would have to be replaced. Unfortunately, there is no way to replace just the cold valve portion of the valve. This is the only replacement valve that will function properly on your unit. I hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
January 30, 2018
Washer starts filling at normal speed but then fills extremely slowly. Changing water level or water temperature does not change the problem.
For model number WTW5200VQ2
Hi Richard,
Thank you for your question. If the water is filling slowly into the washing machine, the issue is likely with the water inlet valve. Check the screens on the valve to see if there are any debris on them. The screens are delicate and may be damaged if clean. So if there is debris, the valve may need to be replaced. Also check the hoses also as they may be clogged as well. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Becki
September 16, 2017
Hot water leaks in tub while machine is off
For model number wpw5200vq2
Hi Becki,
Thank you for your inquiry. If there is water leaking into your washer when it is off you will need to check and possibly replace the water inlet valve. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Omer
December 23, 2017
Water temperature does not go to hot. After turning it a few times it goes to hot?
For model number wtw5300vw
Hello Omer,
Thanks for your question. We would advise testing the water inlet valve with a multi-meter along with the temperature switch to see if they have continuity. Replace either of them if they do not show continuity. If those parts test correctly, consider examining the pump itself for any signs of damage and replace it if needed.
I hope this helps.
My washer will not fill with water. It first began during rinse cycle only, now will not fill at all. Once the washer has been filled with water (using buckets) it will run entire wash cycle. (filling again for rinse cycle using buckets) it will finish the washing cycle specified on dial knob. But i am not sure which part to get. My father replaced the lid switch but did not solve the problem. Is it the water inlet switch i need to replace or the cycle dial control knob.
For model number ETW440WQ0
Hello Jessica, Thank you for the question. This does sound like an issue with a defective water inlet valve and it would need to be replaced. Thank you for your inquiry, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Troy
October 24, 2017
Washer fills to correct water level in wash cycle, but only 1/3 in rinse. Drain has good air flow, no vacuum siphoning is occurring. I assume there is only one level sensor/pressure switch, so I'm at loss to understand the issue.
For model number RTW4440XQ0
Hi Troy, Thank you for the question. I suggest replacing the Timer,PartSelect Number PS11750181.The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
