Whirlpool/Whirlpool_Thumb/YI82YVH4.gif
See part 29 in the diagram
Replacing your KitchenAid Wall Oven Temperature Sensor play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Temperature Sensor

★★★★★
★★★★★
10 Reviews
$98.22   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11748765
Manufacturer Part Number WPW10131825
Manufactured by Whirlpool
Product Description

Temperature Sensor Specifications

This temperature sensor detects the temperature within the oven cavity.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Oven is too hot | Little to no heat when baking | Oven not heating evenly | Will Not Start
This part works with the following products:
Wall Oven, Range, Microwave Oven Combo, Cooktop.
This part works with the following products:
KitchenAid, Whirlpool, Jenn-Air, Maytag.
Part# WPW10131825 replaces these:
AP6015486, 4455636, W10131825, WPW10131825VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

20 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sean
October 17, 2017
When I turn on my top oven after about 5 minutes of preheating the door lock engages and i get the error code f3 e2. Do you know what can cause this? Thank you
For model number RBD245PDQ15
Hi Sean, Thank you for the question. The error indicates an issue with the Temperature Sensor. You can try to disconnect power or unplug the appliance. Check the temperature sensor wire to see if it is loose. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC). Hope this helps!

16 people found this helpful.

Was this helpful?
Thank you for voting!
Rick Szymanski
January 30, 2018
Oven will only heat up to 300 degrees no matter what i set the temperature at ,also will stop the heating process after it reaches the set temp. Act like its working fine ,just wont restart,to maintain set temp
For model number kgrk806pss00
Hello Rick, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: temperature sensor, high limit thermostat, thermal protector thermostat, fixed thermostat, and control board. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Ellen
November 29, 2018
Whirlpool built in oven model #rbs305pd016. When the oven reaches the "set" temp. It doesn't shut off and just keeps getting hotter. Do i need a new heat sensor? Do you know the part number?
For model number RBS305PD016
Hello Ellen, thank you for your question. Yes, it sounds like a temperature sensor issue. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC). Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Dale
September 5, 2017
Can you provided directions for installing the oven temperature sensor. My oven does not heat; it does not even begin to heat. Yet the indicator shows that the oven is on. I please.
For model number KDR 463LSSO
Hi Dale, Thank you for your inquiry. For information on how to install the temperature sensor, there is a video listed under the photo of the part that you may reference on how to install the part. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Michael
August 31, 2017
My upper oven does not always heat up, wonder what my problem may be? Thanks.
For model number G80309PVS02
Hi Michael, Thank you for your inquiry. If your upper oven is not heating up, the majority of the time it is the temperature probe, part number PS11748765, that will fix the issue. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Carole
March 18, 2018
Do you have a video for installation of temperature sensor for my slide-in stove?
For model number Kgrs807sss01
Hello Carole, Thank you for your inquiry. We do have an installation video for this part and I have included the link below. Hope this helps! https://www.partselect.com/PS11748765-Whirlpool-WPW10131825-Temperature-Sensor.htm?SourceCode=4&SearchTerm=KGRS807SSS01&ModelNum=KGRS807SSS01#RepairVideo

2 people found this helpful.

Was this helpful?
Thank you for voting!
Amanda
August 8, 2019
My oven will sometimes heat fine, but other times will not heat to set temp. It used to be mostly after i had been using the oven, then turned off, then back on after a brief rest. It seems to be more frequent and unpredictable now.Thanks for you help
For model number KDRP467KSS0
Hello Amanda, thank you for your question. It sounds like you have a bad oven sensor. We would recommend testing/replacing this part. PartSelect Number: PS11748765. I suggest testing the sensor. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC). Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Temeka
February 18, 2020
Hello, we are getting a error message when turning the oven on.Error code f3 eo it says oven sensor - upper. what is the part i need for this? or how can i correct this error because sometime it works and other nothing.
For model number KDSS907XSP01
Hello Temeka, thank you for your question. The oven temperature sensor for this unit is PartSelect Number: PS11748765. Yes, that error code is in relation to the sensor and replacing this part should fix the issue. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Dean
December 18, 2019
The element on this oven fried and needed to be replaced, so i ordered a new one from partselect and installed it. The oven would not come up to baking temperature as the preheating element shut off prior to getting up to temp. I surmised that the temperature sensor was likely damaged when the element was melting down, so i ordered that and replaced it. The oven still does not come up to temperature. What else could be the issue?
For model number KEMS308SSS05
Hello Dean and thanks for writing. You might have to calibrate the oven. Check the manual for instructions. We hope this helps. Please contact us anytime.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Abraham
August 22, 2017
After using clean cycle, the oven went blank and door locked with no power or light. Is this part the cause? How do i get it fixed. Thanks
For model number IBS350PXS00
Hello Abraham, thank you for contacting us. It is possible that you may need a new temp sensor after that. Possibly more common would be the high limit thermostat PS11747249. This trips when the oven gets too hot or senses a runaway temperature. The reason that may happen could be from a bad fan motor that is not spinning fast enough PS11703401 Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Part Videos

Replacing your KitchenAid Wall Oven Temperature Sensor

Replacing your KitchenAid Wall Oven Temperature Sensor play video
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 2 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Over heating oven and uneven baking. Oven thought it was in self cleaning mode.
    Sensor replacement was removing 2 screws and gently pulling on old sensor until the clip comes out. Secured the other end of the wires so that it did not fall back inside. Then connected the new sensor clip to the oven wire, then gently returning wire into oven, and then screwing the sensor into place.
    The baking element was easier than the sensor. Removed the 2 screws holding the element into the back bottom of the oven, and pulled the element forward to disconnect from clamps. Inserted new element into clamps and screwed it in. ***NOTE that there will be a smell from the new element. This smell is normal. If the smell continues after a couple minutes stop the oven and wait an hour before reattempting.
    • Nicholas from OWENS X RDS, AL
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    • Parts Used:
      WPW10207397, WPW10131825
    11 of 12 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Broil element burned out/temp sensor questonable
    I followed instructions from the videos provided on the Part Select site. As with many such appliances, parts are interchangeable between brands. this unit is a KitchenAid but Whirpool,Kenmore parts interchange...Access from the front is all that's needed however and the only tool required was a phllips head screw driver...the only negative surprise (which the video warned about but I ignored) was the risk of the element leads drawing back through the holes, which 2 did. Save yourself that trouble by securing the wires to the back oven wall with a small strip of duct tape until you're ready to re-attach them to the new element. This necessitated removing the oven entirely for access to the back; the most time consuming aspect being removing/replacing what seemed like 20 odd screws holding the back cover in place! If not for that mistake, entire job would have been under 30 minutes. Well worth the effort and would do it again!
    • Stephen from HOUSTON, TX
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers
    • Parts Used:
      WPW10131825, WP9760774
    7 of 8 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      10 Reviews
      4.7
      Filter By Rating:
      • 5 Stars
        9
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        1
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11748765
          Manufacturer Part Number: WPW10131825
          Brand
          Model Number
          Description
          Whirlpool
          GBD277PDB09
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDB10
          Wall Oven - Built-in, Electric, Double
          Whirlpool
          GBD277PDB4
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDB5
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDB6
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDB7
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDB8
          Wall Oven - Built-in, Electric, Double
          Whirlpool
          GBD277PDQ09
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDQ10
          Wall Oven - Built-in, Electric, Double
          Whirlpool
          GBD277PDQ4
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDQ5
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDQ6
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDQ7
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDQ8
          Wall Oven - Built-in, Electric, Double
          Whirlpool
          GBD277PDS09
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDS10
          Wall Oven - Built-in, Electric, Double
          Whirlpool
          GBD277PDS4
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDS5
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDS6
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDS7
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDS8
          Wall Oven - Built-in, Electric, Double
          Whirlpool
          GBD277PDT09
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDT10
          Wall Oven - Built-in, Electric, Double
          Whirlpool
          GBD277PDT7
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PDT8
          Wall Oven - Built-in, Electric, Double
          Whirlpool
          GBD277PRB00
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PRB01
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PRB03
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PRQ00
          Wall Oven - Built-in, Electric
          Whirlpool
          GBD277PRQ01
          Wall Oven - Built-in, Electric

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service