Lid Hinge Mounting Screw

Using kit 285587 was straight forward. Removed fabric softener dispenser & sealing cap. It took more time to find the socket set (needed a 7/16 socket) with a long driver (10 inch) than to unscrew & remove the auger & agitator.
Cleaned up the bowl whilst it was apart (good buildup of junk under the agitator). Replaced agitator, new thrust washer to find that grease should be applied but isn't included in kit (get part not 350849). Grrr.... Applied new auger, cam, dogs and holder. (No instructions in kit for assembling cam, dogs & holder, but you can work it out ok). Applied new bolt & washer, new seal on cap. Installed fabric softener. Could have been a 15 minute job but peace and quiet in the garage makes it worthy of taking longer ;-)

Removed the back panel and cabinet. Removed the pump and separated the gear box and motor. Replaced coupler, reassembled. Lid switch removed/replaced very easy, as was lid screw.

I followed the you tube video provided when I ordered the parts. It was all I needed to make the repair. It was simple. It saved me the cost of a new washing machine. I would highly recommend it. In fact I am ready to order more parts to fix a Kitchen aid mixer.

replaced missing screw and pad and now machine works perfectly