The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Whirlpool.
Part# WPW10111389 replaces these:
AP6015080, W10111389
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
February 22, 2018
Timer will not advance washing cycle when set for full time in regular wash mode. If you set it for shorter time, it works fine. Also works fine on all time settings on other modes (ie: Delicate/ casual) little help please.
For model number MTW5870TWO
Hello Mike, thank you for your question. If the timer is not advancing on one cycle but others will work I would recommend . You can test the timer contacts for continuity with a multi-meter but you will require the electrical schematic to determine the correct terminals to check. You can also check the timer motor for continuity with the multi-meter as well. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
February 26, 2018
My Maytag washer fails to put water in the tank when i turn it on to fill up with water.If you wait a little bit it will start putting water in but you never know for certain whether it will or want.Does this sound like the timer to you?Once it starts working it will keep working load after load,but let it set over night and try to wash again the next morning and it will act up again.
Hi Joe,
Thank you for your question. Depending on the type of washer you have, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the water inlet valve, the lid switch, the selector and water temperature switches, the water level switch and the timer or electronic control board. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Anita
September 13, 2017
Washer will not fill completely. I have to keep restarting the cycle until the tub is filled. Will this part work for this problem?
For model number MTW5740TQ0
Hello Anita, thank you for contacting us. It does sound like the timer is shutting the washer down prematurely, you would need to replace it to fix this issue. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
November 19, 2017
My Maytag washer stops before advancing into the spin cycle. When i lift and drop drop she advances. I already replaced lid switch, that did not help. What could be the problem?
For model number MTW5870TW0
Hi Michael,
Thank you for your question. Then I would suggest checking parts like your clutch assembly and your direct drive. Parts that are used to spin your drum. Just to check to see if anything has worn down at all. If those parts are fine, you may have to take a look at your motor start capacitor or the motor itself being the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dane
September 10, 2019
When I the pull timer knob, the washer does not fill in some of the cycles.
For model number MTW5700TQ0
Hi Dane,
Thank you for your question. If the washer is not filling with water on some of the cycles, the timer is one part to check. There are some other parts that you will need to check to see which one is causing the issue. You will need to check the water inlet valve, the water level pressure switch, the lid switch and the water inlet syphon. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gerald
August 6, 2021
Washer will not start on any wash cycle. It will only run on spin cycles. Is this a problem with the timer?
For model number MTW5840TW0
Hello Gerald, Thank you for the question. If you can manually start a spin cycle but not a wash cycle, normally it is an indication the timer is defective and will need to be replaced. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
August 10, 2021
Washer timer. If I install a new timer, how can I set the control knob to the wash cycle so that the washer rotates thru all the cycles properly. part ps11748352
For model number MTW5630TQ1
Hello Terry, Thank you for the question. Once the new timer is installed, there is only one way to install the knob. You just need to line the hole in the back of the knob up with the Post from the timer and push it on into place. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Marcelo
May 25, 2022
My machine does not complete the cycle,that is,it does not release water,the water remains.
For model number MVWC500VW1
Hi Marcelo,
Thank you for your question. If your washer does not drain, there are some parts that you will need to check to see which one is causing the issue. You will need to check the washer lid switch, the pump retainer, the drain pump, the motor, the motor start capacitor, the gearcase and the timer. Also, check the drain hose to see if it is clogged and to see if there are any kinks in it. We have included a link that you may reference on how to check some of these these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
When the wash agitation cycle ends and the tub begins to drain i hear the clutch kick in and the washer starts to spin while it is draining. As a result water is ejected from the tub and leaks onto the floor. I can over come this only by resetting the timer knob - sometimes it takes several tries to succeed. Do you think a new timer fix this? Or might it be something else?
For model number MTW5620TQ1
Hello Marc and thanks for writing.
It could be a faulty timer, but it sounds more like a faulty Water pump PS11741239 and /or a faulty clutch (kick) PS334641 test and replace if needed. We hope this helps. Please contact us anytime.
When i set the temperature control switch to fill with hot water it fills with cold. The temperature switch has three settings, cold, warm and hot, the cold and warm settings work fine. What would cause this to happen?
For model number MTW5840TWO
Hello James, thank you for your question. I would recommend testing the water valve, part number PS11742194, to be sure both solenoids are opening up fully. It sounds like the hot portion of the valve is not opening all the way. If that is not the issue, I would recommend replacing the temperature switch part number PS11746761. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748352
Manufacturer Part Number: WPW10111389