Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Richard N - August 22, 2018
Verified Purchase
Oven Light Transformer
It fits and fixed the lights. If you keep the cooling air grill openings clean before you do a cleaning cycle, you won't need to replace this a second time.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
oven light would not come on
cut power off and placed sturdy table same height as bottom of oven in front of oven. removed trim screws. pulled oven out onto table. removed top cover and panel on left side . tested transformer to be sure it was bad. then replaced transforner
Other Parts Used:
david from SOUTHAVEN, MS
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
November 6, 2017
I installed a 12v 10 watt bulbs inside oven by mistake and they all blew out,now when the proper 5w are installed the lights inside oven will not come on. Is there a fuse or relay that may have blown. Thanks for your help
For model number KEBC20KSS
Hi Bill, Thank you for the question. The Lights Transformer may have blown and will need to be replaced or tested. The two top terminals on the transformer should read 23 VAC, and the two bottom terminals should read 120VAC. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Le
November 22, 2022
Microwave light transformer #PS11747297, mfg #WP9760588 - The problem is with the Microwave light. Two lights have been replaced and one lasted 1/2 day, the 2nd one lasted 4 1/2 days. Obviously, the transformer worked for a while. Do I need a new transformer, or, some other part?
For model number KEMC378KBT01
Hello Le, thank you for contacting us. Mostly a higher voltage than normal will blow lights. As the voltage supplier body is the transformer, part number PS11747297, it is the most probable cause of the issue. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
