10737, 10826, 10870, 16391, 16552, 2-10282, 2-10429, 2-10563, 2-13433, 2-14337, 210282, 210429, 210563, 213433, 214337, 352517, 534425, 543425, 564371, 569086
...
Show more
, 569090, 85484, 89400, 96160, 97644, 99223, 99254, 99317
Show less
Customer Repair Stories
Average Repair Rating: 2.4 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The fill cycles would start then stop suddenly
This was an easy repair. 1st I removed both water hoses 2nd I removed 1 hex head screw that released a backing plate & removed the plate holding the water inlet valve. 3rd I pulled the 4 electrical connections & loosened a clamp to remove a small water hose. 4th I removed 2 hex head screws that held the water valve to the backing plate. -----------that was a whole 5 - 10 minutes!------------ Next I reversed the process 4th I attached the inlet valve with the 2 hex head screws 5th re-attached the 4 electrical connections(had slip on spades) pushed on the hose & tighterned the clamp. 6th replaced the backing plate with the inlet valve attached & tightened the single hex head screw. 7th re-attached the hot & cold lines................................DONE 15 minutes tops
Replaced drain pump & then replaced water mixer. This was difficult as I could not find videos to get into my 35 year old Kenmore 80 Series. We had to "wing it." Got it done & now I have cold water & no leak & it drains/spins. The parts were spot on!
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ronald
November 12, 2019
How do you remove the filters from the back of the machine & replace them
For model number MVWB765FW1
Hello Ronald, Thank you for the question. You will need to turn off the water supply. Next remove both Fill Hoses to the Water Valve ports. With Needle Nose Pliers, remove the old Screens and then push the new ones into the port of the Valve in their place. Attach the Fill Hoses and turn on the water supply. Hope this helps!
12 people found this helpful.
Was this helpful?
Thank you for voting!
David
January 11, 2022
Will mfg. part #wp96160 fit a Maytag washing machine model# mhw6630hw0?
For model number MHW6630HW0
Hello David, Thank you for the question. Very sorry, the Screens for this model are only sold as part of the Valves. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
The valve body of this part could be blue or green in color. There are two ports for water to enter, and this valve is compatible with a half inch ID hose. It has two 3/4-11x1/2 NHT hose threads.
This part has two ports for water to enter. It is blue and is intended for use with many washing machines and comes with a multi-mount bracket and an outlet adaptor.
This washing machine water inlet valve has two ports for water to enter. This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746894
Manufacturer Part Number: WP96160
