Maytag/Maytag_Thumb/JPGG96AS.gif
See part 9 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Timer - 60 Hz.

★★★★★
★★★★★
2 Reviews
$269.95   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11746742
Manufacturer Part Number WP8577356
Manufactured by Whirlpool
Product Description

Timer - 60 Hz. Specifications

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Timer will not advance | Will Not Start
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Kenmore, Maytag, Amana.
Part# WP8577356 replaces these:
AP6013516, 8577356, 8577356R
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

8 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
April 26, 2018
I recieved the new timer.Need to know how to install selector knob on the timer shaft.
For model number wp8577356 timer
Hi Ken, Thank you for your question. There is a video on our website that you can reference on how to install the timer knob. The washer and the knob in the video may not show exactly like the ones you have, but it will give you a general idea on how to install the part. You will find the video under part number PS1482197. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Karl Pope
December 19, 2019
The issue is when its done filling up with water it doesn't advance to the next cycle
For model number 110.27642600
Hello Karl, thank you for your question. We would recommend testing the lid switch first, which is PartSelect Number: PS11745957. If that part is ok, the issue would be with the timer, PartSelect Number: PS11746742. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Lester
December 23, 2019
Washer works, but stops at the rinse cycle.
For model number WTW5530SQ0
Hi Lester, Thank you for your question. If the washer is stopping at the rinse cycle, the issue may be with the lid switch. If the lid switch is malfunctioning, it can prevent the washer from working correctly. You should also check the pump and the timer to see if they are working correctly as well. We hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
George
October 10, 2019
Timer sticks during wash cycle. Must be moved manually or it will keep washing forever.
For model number IS43000
Hi George, Thank you for your question. If the timer is sticking, check the knob to to see if it is causing the problem. If not, it could be the timer itself. There are some other parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=IS43000&mfgModelNum=&fkMfgID=3&ModelMasterID=217652&PID=32. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Denise
November 4, 2017
When using hand washable. The machine fills with water and stops. It does not wash or rinse! But if i advance the dial to spin it does spin. All the other cycles work well.
For model number WTW5300VW2
Hi Denise, Thank you for your question. I would suggest checking your lid switch to see if it is working correctly. It sounds like maybe it is having a little bit of an electrical issue. You should be able to test that part with a multi meter. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
John
November 18, 2017
Just bought and replaced water valve and thermistor through your store but it didn't solve my problem. Washer isnt fully draining water at the end of cycle, leaving a layer of water on bottom of tub and sopping wet clothes. Any clue? Pump or timer. Seems like water is slowly leaking back in? I'm clueless. New ones are too expensive
For model number WTW5600VQ0
Hi John, Thank you for your inquiry. If your washer is not draining the water, There are some parts that you will need to check to see which one is causing the issue. You will need to check the drain pump, the direct drive motor coupling, the clutch assembly, the lid switch, the agitator directional cogs, the pump retainer, the motor start capacitor, and the motor. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Karl
December 17, 2019
How do i figure out if i have a motor or timer issue? I took made sure the pump was good and not stopping the motor from spin. And the motor spins freely
For model number 110.27642600
Hello Karl and thanks for writing. We would need to know which symptoms you are trying to fix? Looking forward to your reply. For your convenience, we have attached the link to your manual with repair instruction. We hope this helps. Good luck with your repair https://partselectcom.azureedge.net/assets/manuals/E0DF139E6E2251C3450DBC0E7744C1B644763238.pdf

Was this helpful?
Thank you for voting!
Bernardo
February 26, 2019
How do i remove the timer ?
For model number Kenmore washer 600 "2008"
Hi Bernardo, Thank you for your question. There is a video on our website that you can reference on how to install the timer knob. The washer and the knob in the video may not show exactly like the ones you have, but it will give you a general idea on how to install the part. You will find the video under part number PS1482197. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
4.5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746742
Manufacturer Part Number: WP8577356
Brand
Model Number
Description
Kenmore
11027612600
Washer
Kenmore
11027632600
Washer
Kenmore
11027642600
Washer
Kenmore
11028522700
Washer
Kenmore
11028522701
Washer
Kenmore
11028532700
Washer
Kenmore
11028532701
Washer
Kenmore
11028622700
Washer
Kenmore
11028622701
Washer
Kenmore
11028632700
Washer
Kenmore
11028632701
Washer
Kenmore
11028692700
Washer
Kenmore
11028692701
Washer
Kenmore
11029622800
Washer
Kenmore
11029622801
Washer
Kenmore
11029632800
Washer
Kenmore
11029632801
Washer
Kenmore
11029672800
Washer
Kenmore
11029672801
Washer
Kenmore
11029682800
Washer
Kenmore
11029682801
Washer
Kenmore
11029692800
Washer
Kenmore
11029692801
Washer
Kenmore
11029722800
Washer
Kenmore
11029722801
Washer
Kenmore
11029727800
Washer
Kenmore
11029727801
Washer
Kenmore
11029732800
Washer
Kenmore
11029732801
Washer
Kenmore
11029737800
Washer

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service