Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ted D - April 6, 2021
Verified Purchase
Easy repair
The part was the right length unlike some after market belts i tried it pays to get the oem belt
★★★★★
★★★★★
Anne Marie H - August 20, 2020
Verified Purchase
Easy Repair
The part was in great condition and came fast. Our dryer is back to working condition
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.6 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer would run 1 min then stop running with some heat in drum
Videos are excellent to open and access internal parts. It turned out a rat was killed in the blower fan when we first encountered the problem. This prevented the blower from turning which interfered with motor function.
This required removing drum & belt, disconnecting motor clips, blower belt, and blower housing. The blower housing needed to be disassembled. Having a 5/16” & 1/8” ratcheting nut driver makes this process much easier. Don’t try this with a wrench.
After getting rid of the rat and decomposition, we sanitized the entire housing with soap & chlorine bleach.
Reassembly was uneventful and relatively easy. We ended up replacing 4 rollers, 2 belts (drum belt & blower belt), the thermistor which was damaged as a result of the blocked blower.
Looked it up on YouTube and followed the video instructions. Repair went fine after I got the correct parts ordered from two different places before I got the correct parts. Parts Select was the only one that sent the correct parts.
Thankfully, I read this customer review before starting my repair:
"Repaired the 4 drum support rollers, 1 idler assembly, 9 tri rings, and 1 washer that came with the kit, however, the multi rib dryer belt that came with the kit did not fit my dryer. After several attempts to troubleshoot the problem, I realized that the belt was too small. I contacted PartSelect customer service and advised that the multi rib dryer belt that came with the kit was too small and I need to purchase a belt (P/N WP8547157) that fits my dryer. Recommend: Advise customers that the belt in the kit may not fit the recommended dryer."
I called PartSelect and discovered that they HAVE NOT put a warning statement with their "PartsKit" despite the above customer's complaint! No explanation nor apology given. I bought the "PartsKit" and I PAID EXTRA TO BUY THE CORRECT DRUM BELT.
I too, recommend that PartSelect Advise customers that the belt in the kit may not fit the recommended dryer.
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Judi
November 17, 2017
What is the size of this belt? Is this what i would need if tumbler stopped turning? If not what do you think i need?
For model number WP8547157
Hi Judi,
Thank you for your question. This part is approximately 95" long. The manufacturer does not give us exact specifications so we can only give you an approximate length. It could be the part that you need. I would suggest checking it to see if it has worn down. I hope that helps. Good luck with your repair.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Marco
February 27, 2020
What's the length of the belt??
Hello Marco, thank you for your question. Thank you for your question. This part is approximately 95" long. The manufacturer does not give us exact specifications so we can only give you an approximate length. We hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Norm
January 13, 2020
How long is the drum belt in inches?
For model number 11077032601
Hi Norm, thank you for your question. This part is approximately 95" long. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Freda
January 13, 2018
I need a belt for a Whirlpool cabrio it takes a 95.19 do you have them
For model number Wed7300xwo
Hello Freda, Thank you for your inquiry. The part number for this model that measures 95.19 is WP8547157. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Robin
February 26, 2018
I took apart the back of my dryer. Because it suddenly stopped drying my cloths from the morning i put them in i checked after work they were wet. I went to put back on. But nothing except a power light the time i added , once i hit start it would click. I thought maybe it was a thermister. So i ordered the part. Taking apart the back of the dryer i found a belt . I think it's a drum belt. Very long no part on it. But don't want to order it. If it isn't the piece. And now not knowing does it go on any pulley of any sort. Also found a hard plastic ring washer. Help!! thank you
For model number WED7600XW0
Hello Robin, thank you for your question. The dryer drum belt would only have to be replaced if it is broken. If the unit will not turn on, the motor does not run you will want to start your diagnosis by checking the door switch part number WPW10201785 which is located behind the front panel, and is activated when the door is closed. You will also want to check the motor belt WPW10411937 which is located around the motor area. If these parts are functioning correctly, the electronic control board might be the issue. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paul
December 21, 2017
I replaced the idler arm and can't remember how the drum belt goes back on (over or under) the idle arm. Is there a schematic diagram online that illustrates the belt installation? If so, where can i find it? Thanks
For model number MEDB200VQ1
Hi Paul,
Thank you for your question. Unfortunately we do not have any installation instructions specifically for this part however I believe this video will show you how that part is installed back on to your pulley: https://youtu.be/LxooXQCin8Y . I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Louis
September 25, 2019
This belt is way to tight. Is there an alternate. Runs against pulley and motor shaft.
For model number 11067082600
Hi Louis, thank you for your question. There is only this belt listed underneath your model as compatible. Belts are supposed to be tight at first because over time they loose that tightness and need to be replaced. Good luck with your repair.
Was this helpful?
Thank you for voting!
Anthony
January 8, 2023
Correct belt size for the drum belt
For model number WED8900bc
Hi Anthony, thank you for your question. This part is approximately 95" long. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the drum roller only and ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746374
Manufacturer Part Number: WP8547157
