The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Roper, Whirlpool, Inglis, Estate.
Part# WP8541939 replaces these:
8541939
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
the timer died to where i manually had to run it
I took the back part off, had to use socket wrench and screw driver, lifted the top off, then I took the knob off, had to use the pliers to squeeze the ends together to take it off. then I took off the wire harness. Had to use the socket wrench . Took off the old timer and went in reverse to hook it all back together.
Other Parts Used:
SanJuanita from Fort Atkinson, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
17 of 30 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
October 21, 2019
Washer suddenly does nothing but fill. Timer will not advance.
For model number tawx700pq1
Hi Steve. thank you for your question. There are a couple of parts that you should check. Your timer being one of them, you may also want to take a look at your door latch as well. Sometimes if that part is malfunctioning it will not let your appliance advance into the other parts of the cycle. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Celeste C
May 2, 2019
When the knob is pulled out it is making noise but the washer isn't doing anything.
For model number TAWX700JQ2
Hello Celeste, thank you for inquiring. For this symptom you will want to replace either the Lid Switch part PS11722098, the Direct Drive Motor Coupling part PS1485646, the Lid Strike part PS11741871, or the Motor Start Capacitor part PS11746660. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
