Box, Heater

Hi Suzanne, Thank you for the question. Once you take the back panel off the dryer you can remove the heater element box . First remove the thermostat off the heater box, then take all the screws out holding the box to the dryer dryer. Remove the element from the box and reinstall it into the new box along with the the thermostat and reverse steps to reinstall the new box and back panel. Most customers were able to do the repair on their own. Hope this helps!

Hi Roxanne, Thank you for your inquiry. The part number for the heating element for your dryer is PS334313. I hope this helps. Thank you and have a great day!

Hi Dave, Thank you for your question. The box heater is a part that fixes the issue less than 1% of the time, but you still check it if you suspect it is causing the issue. There are some other parts that you will need to check to see which one is causing the issue. You will also need to check the thermal cut-off, the internal bias thermostat, the high limit thermostat, the heating element and the heating element connection wire. I hope this helps. Thank you and have a great day!

Hello Don, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Hi Scott, Thank you for the question. I suggest checking the Thermal Cut-Off Kit, PartSelect Number PS334299. The thermal cut-off turns off the heating component when the dryer overheats, ensuring there is a consistent level of heat at all times. This dryer thermal cut-off kit includes one high-limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires. Hope this helps, good luck with this repair!

Hello Scott, Thank you for the question. I suggest testing or replacing the Thermal Cut-Off Kit, PartSelect Number PS334299. The thermal cut-off turns off the heating component when the dryer overheats, ensuring there is a consistent level of heat at all times. This dryer thermal cut-off kit includes one high-limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires. Thank you for your inquiry, good luck with this repair!

Good Day William. Thank you for your question in regards to your unit (Model Number 11061402311). Based on our research the PartSelect Number for the part that is compatible with your unit is PS334313. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.

Hi Manny, Thank you for your question. The part number listed under your model number for the heating element is PS334313. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Good Day Barry. Thank you for your question in regards to your unit (Model Number MEDC400VW0). Based on our research this part appears to have been discontinued and we no longer have any left in our inventory (Part Number 14210029). We would recommend reaching out to the manufacturer as they may be able to advise of an alternative part that would be compatible with your unit. Best Regards.

Hello Tank, Thank you for your inquiry. Have you checked the white thermal fuse part# WP3392519? Otherwise it could be a wiring issue. We would recommend checking the wiring harness for any visible damage. Hope this helps!