Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
August 9, 2017
Tthe small “cook top on” light that is lit continuously although no
Burners are on. The burners are fine and the “hot surface” light on the
Right is fine. The part number, i think, is ps11746053.. is replacing this part sufficient to solve the problem?
thank you for your help and advice.
For model number WFE36ILVQ white
Hi Tim,
Thank you for your inquiry. Yes I believe that this part would be the right replacement to fix that problem. However I would suggest testing it with a multi-meter first. Just to be sure that this is the part that you need to replace. Good luck!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Barbara Dexter
August 22, 2017
When my burners are all off and the stove top is cold, the light on the right which says "hot surface" stays lit is the replacement for this problem pn ps11746053
For model number WFE510S0AS0
Hi Barbara,
Thank you for your inquiry. It sounds like one of the burner switches may have a shorted contact inside it and you will need to test the continuity of each switch with a multimeter. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sue
March 12, 2019
The indicator light on the right side stays on. What part number is needed. Thank you
For model number wfe540h0es1
Hi Sue,
Thank you for your question. You will need to replace the light indicator switch. The part number listed under your model number for it is PS11746053. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Raj
May 21, 2019
The hot surface red light does not come on. I don't know if only the indicator lens needs to be replaced or the indicator light surface unit as well.
For model number WFE515S0EW
Hello Raj, Thank you for the question. The lenses is just a plastic cover for the light. We would recommend replacing the indicator light. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Barney
November 21, 2019
Just replaced burner switch, due to would not shut off, now the stove top heat light stays on all the time, what should i look for now?
For model number WFC310S0EW0
Hi Barney, thank you for your question. Be sure to cut power to your appliance and remove any parts before doing tests. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your element. It should be reading between 0 - 50 ohms to be working correctly. You may also want to double check the light indicator itself and perhaps the wiring, just make sure the part is working and it is wired up correctly. The last part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. It could also be your wiring that is the issue but you should see visual damage on that part in most cases. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
