Product Description
Washer Lid Switch Specifications
The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the grounding wire.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Will not agitate | Will not drain | Burning smell
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Kenmore, Maytag, Roper.
Part# WP8318084 replaces these:
AP6012742, 8318084, WP8318084VP
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Collen H - December 10, 2023
Verified Purchase
Perfect solution !!
This lid switch was the simple solution to fix our washing machine. The order clerk was very efficient & our order arrived quickly.
Gilbert P - February 23, 2022
Verified Purchase
Perfect replacement part
Fast service.
Yves S - February 3, 2022
Verified Purchase
The best thank you
Best place to order parts
S M - June 25, 2021
Verified Purchase
Easy Repair - following video instructions.
The part was a perfect fit. My washer is working again without the need to fiddle under the panel.
Lucie B - January 9, 2021
Verified Purchase
Fonctionne bien sauf que....
Ce n'était pas le bon problème sur ma laveuse mais cette erreur de commande a quand même été utile, la pièce d'origine était fonctionnelle mais cassée. Service et expédition rapide. Merci !
Kout S - January 2, 2021
Verified Purchase
Perfect fit
Good part easy install. Thx u
Linda M - November 7, 2020
Verified Purchase
Our washing machine is working like new!
This washer lid switch arrived quickly and was easy to install. It fixed our problem and now our washing machine is working like new.
Tom W - September 24, 2020
Verified Purchase
Very easy repair which took a total of 15 minutes
The lid switch that I had ordered was delivered very quickly and it was exactly as the original that I replaced
G V - May 23, 2020
Verified Purchase
Part was exactly what I needed.
The part was shipped out right away, install was easy, machine is back to working, better than buying a new one. Was surprised how easy it was to replace.
Michael M - May 20, 2020
Verified Purchase
Washing Machine would stop as if lid was lifted
Easy to install and fixed the problem. Part arrived quickly.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 31 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer wouldn't run
I removed the two screws on the back of the control panel. The control panel then flips back. The switch is on the left side. To remove the switch, I first detached the wire to the control panel and unscrewed the grounding wire. The new switch drops right in. I had a little trouble getting it in until I realized the washer lid had to be open. A little awkward but once it's in you can shut the lid and then I reattached the wire from the control panel and screwed in the grounding wire. Pretty easy. $20 for the part (with shipping) and 15 minutes. Way cheaper than a repairman.
Other Parts Used:
-
Clint from Kansas City, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
325 of 366 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer would not run
First, I removed the two screws that hold the back-top in place. I removed the top to get to the control timer. I replaced the control timer with a new part and replaced the lid switch (which I broke removing the old one). Put it all back together and still nothing. I removed the two spring U clamps at the top back that hold the entire casing in place. I removed the casing. I checked out the wires leading to the motor and the white wire showed signs of a burn. When touching this wire it broke off. I used a pigtale from the connector to the old wire, soldered it in place and put it all back together AND, WOW, LUCKY ME it has been working since.
The parts I ordered on Monday, came to my house the next day and I did not pay for additonal shipping. I returned the timer and the $ was credited to my account in about one week. Partsselect is about the best experience I have had on the internet.
The parts I ordered on Monday, came to my house the next day and I did not pay for additonal shipping. I returned the timer and the $ was credited to my account in about one week. Partsselect is about the best experience I have had on the internet.
Other Parts Used:
-
Martin from Cleveland, TN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
93 of 116 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lid Switch Failed - Machine Filled but Stopped
I bought the manual and the switch. I found the manual to be rather generic version that caused problems from the start because the screws to remove the control panel were not in the location shown. Once I had the machine disassembled, removing and replacing the switch was a very simple task. I took time to clean inside the cabinet. That took an extra few minutes. If I had to do this job again today, it could be done in less than 30 minutes. Note: there was a sheet metal screw on the back of the cabinet, left side, near bottom This screw was also not noted in the manual and when I pulled the cabinet forward, the screw was torn out and the cabinet bent slightly. No major damage,
Other Parts Used:
-
GEORGE from VACAVILLE, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
82 of 112 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lid switch stopped workin
Unplug washing machine from electrical outlet. Remove two screws that go at a 45 degree angle into the top of washer from behind control panel. Pull panel console towards you and then up. unplug lid switch from wire harness. It's in upper left corner of the washer. A little awkward but lid must be open. pull switch up from top of washer. insert new one, it just clips in, then plug back into harness. Re mount control console and you are done.
Other Parts Used:
-
Frank from brunswick, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
57 of 69 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer full of water, wouldn't cycle
Although your website mentioned removing 2 screws to open the control panel, it took a while to realize there were 2 screws and 2 hex nut screws to open it followed by 15 minutes of efforts to release the control panel from the top of the washer by sliding it forward. After that it took 2 minutes to replace the switch; the web comment of keeping the lid open was helpful.
Unfortunately, the lid switch was not the problem; replacing the timer did the trick, was very easy with the control panel already opened and required the purchase of 1/4 and 3/16 hex nut drivers.
Parts, shipping and tools cost $110 but the success of the repair with your parts and advice was priceless.
Unfortunately, the lid switch was not the problem; replacing the timer did the trick, was very easy with the control panel already opened and required the purchase of 1/4 and 3/16 hex nut drivers.
Parts, shipping and tools cost $110 but the success of the repair with your parts and advice was priceless.
Other Parts Used:
-
peter from bethesda, MD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
34 of 43 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer machine wouldn't start
First I removed the two screws holding the main controller located on the back. I then slide forward the hole controller and I pulled out. Disconnected switch located on your left. (remember to place down washing machine lid before installing the new switch.)
Other Parts Used:
-
Pedro from Riviera Beach, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
30 of 35 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer lid switch worked sometime, sometime not
First, I'm so excited that this site exists because I knew that the problem was minor and I didn't want to pay the outrageous housecall price of a repairman. I read other customers' experiences on how they fixed the problem and that made it sooo easy! Basically unscrewed the screws on the far left and right on the top panel, folded it down toward front, unscrewed and unplugged the ground wire and replaced the part. Someone else had warned that the lid should be open to remove it and that was a huge time-saver. Thanks so much! The part was broken because of very poor design. The part actually worked fine, but the piece of thin plastic that held the part in place broke. Back to the drawing board Whirlpool.
Other Parts Used:
-
Jill from Alexandria, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench (Adjustable)
23 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My washer stopped mid-cycle and acted completely dead
I thought the click of the lid switch sounded different so I pulled the top console and tested it for continuity in both positions and found none. When I by-passed the switch the washer started up, so I knew what the problem was. There are four screws involved to remove the console which reveals the lid switch to the left side. There's a single screw for a ground wire but the switch itself is simply snapped in place after disconnecting the wire harness plug (must be done with the lid open btw).
I was lucky to diagnose the problem accurately so that the first thing I suspected turned out to be the problem!
I was lucky to diagnose the problem accurately so that the first thing I suspected turned out to be the problem!
Other Parts Used:
-
Jeff from Ventura, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
22 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
stopped working only filled with water.
Fast simple and supper easy! Please do not waist your time or money on repairmen that rip you off. You are garunteed all the way or your money back from Parts Select. Go to your model number than read a few stories of others to better pin point your problem then order part and your item will ship fast I had my part on the 2nd day of the order. Do not be fooled you can do it easily! I have order twice and both items went smoothly and took less then 10 minutes to put in. Thanks Parts Select for making it possible for the little guys and supporting them and not the big rip off scammers. I will be back when needed. May you continue in your good deed! C.S.
Other Parts Used:
-
Christa J from ElDorado Springs, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
20 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer wouldn't start up after filling & closing lid
First I loosened the 2 screws on the outside of the top control assembly with a philips screwdriver. Then I took out the 2 other screws toward the top on the back with a socketwrench.Next I removed the top so I could access the switch. After that I removed the broken switch and unhooked from wire hareness. I then hooked up the new switch and snapped into place. Last I put the top back on and screwed into place.
Other Parts Used:
-
Jeremy from Marengo, IA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
20 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
September 21, 2017
Thanks for your quick reply to my question of how to access the lid switch. Unfortunately my unit does not have the two screws in the back of the control panel. Mine is a performa series unit purchased in 2008.
For model number MTW5740TQ0
Hi John,
Thank you for getting back to us. Before beginning any repair, please unplug the appliance from the electrical outlet or turn the circuit breaker off. First, pull the washer away from the wall to access the backside. Once removed from the wall you will need to loosen the Philips head screws holding the back panel in place. You will need to slide the top panel forward to release it from the mounting tabs. Rotate back the top panel which will expose the existing lid switch. Use a nut driver to remove the screw holding the ground wire in place. Lift up the top lid which will move an arm inside that connects to the switch by moving that arm it will allow you to remove the switch. Squeeze on the release tab to remove the switch and disconnect the wiring harness that goes to the lid switch. Reconnect the new switch to the wiring harness. Lift up the lid again and position the new switch and push it down so it clips into place. Lower the lid and connect the ground wire and screw it in place. With the switch installed, take the top panel and roll it back down into position and align the top panels mounting tabs then lock it into place. Use a Phillips head screw driver to tighten the remaining 2 screws into place. Reconnect the power cord or turn the circuit breaker back on and the washer should be ready to use. I hope this helps with the repair.
58 people found this helpful.
Was this helpful?
Thank you for voting!
John
September 21, 2017
How do i access lid switch?
For model number MTW5740TQ0
Hi John,
Thank you for your inquiry. There is a repair story that one of our customers provided on how they installed the part. The customer advised, "I removed the two screws on the back of the control panel. The control panel then flips back. The switch is on the left side. To remove the switch, I first detached the wire to the control panel and unscrewed the grounding wire. The new switch drops right in. I had a little trouble getting it in until I realized the washer lid had to be open. A little awkward but once it's in you can shut the lid and then I reattached the wire from the control panel and screwed in the grounding wire. Pretty easy. $20 for the part (with shipping) and 15 minutes. Way cheaper than a repairman." I hope this helps. Thank you and have a great day!
30 people found this helpful.
Was this helpful?
Thank you for voting!
Hiram
September 1, 2017
The lid switch in my washer got burned so what i did was, connect directly, the Green and gray cables, it was working ok, but now, sometimes it works ok, and sometimes won't do anything, except fill itself with water, do you guys think if i buy the lid switch it will work ok once again??
Hi Hiram,
Thank you for your inquiry. I believe that yes it should. Bypassing your lid switch can sometimes just be a temporary thing and may not work for very long. Reinstalling a working switch may fix the issue that you are having if nothing else went wrong. Good luck with your repair.
22 people found this helpful.
Was this helpful?
Thank you for voting!
Barbara
August 27, 2017
My washer will start okay but through mid cycle will just stop. If I lift the lid and close again. It will start again.
For model number RTW4440VQ2
Hi Barbara,
Thank you for the question. Sounds like you have a defective lid switch and we recommend replacing the switch to fix the issue.
Good luck with the repair.
15 people found this helpful.
Was this helpful?
Thank you for voting!
Dominic
August 12, 2017
My washer will not advance itself through the cycles unless i manually push it in, and turn it to the next cycle. Does it sound like the lid switch, or the dial itself? Thank you in advance
Hi Dominic,
Thank you for your inquiry. If your timer is not advancing the lid switch is the most common part that will fix the issue. Some other parts you may have to look at as well are the timer, the water level control, the timer knob and skirt, the drain pump and the water inlet valve. For the electrical parts, I would use a multimeter to check the continuity on each of them. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Nimish
February 14, 2018
My washer will not advance itself through the cycles unless I manually bang on the lid. Does it sound like the lid switch, or the timer itself? Thank you in advance
For model number KAWS750LQ3
Hi Nimish, Thank you for the question. This sounds like an issue with the lid switch assembly. You can also try to manually turn or tap the knob to the timer to see if that triggers it to proceed. If this starts the cycle again, it would be the timer. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Rich
January 21, 2019
My washer goes through the wash cycle fine, but it stops when it gets to the rinse cycle. However, if i manually advance it a click, it will then continue through the rinse and finish out the cycle. I wondered if it was a problem with the lid switch, but i thought that wouldn't work at all on the rinse/spin cycle if the lid switch were faulty. Can you help me diagnose the problem?
For model number LSC5000PQ2
Hello Rich, Thank you for the question. If you can manually turn the knob and have the rinse cycle start, the lid switch is fine. This sounds like a defective timer not advancing, PartSelect Number PS11746307. I suggest replacing the Timer. Hope this helps, good luck with this repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Rocky
December 26, 2017
The lid switch and plug for the switch melted together can i buy just the plug end with short wire leads. I have another switch but still need the plug.
For model number LSQ9010PW5
Hi Rocky,
Thank you for your question. Depending on which part is melted, you will either need to replace your switch or the whole wiring harness that your door lock switch connects to. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Toni
January 9, 2018
Hi, I looked on line for reason my Whirlpool ultimate care ii model top loader #lsb6200pq0 will not agitate, spin or drain. The answer I found on line is that my lid switch is probably bad and will need a new one. It's been rather difficult to find the correct part. Some are just a switch with a ground wire others are switch with wire harness and ground wire. My question is if I go and purchase this switch which I believe to be the correct on, and it's not can iI return it? Thank for your help.
For model number LSB6200PQ0
Hi Toni, Thank you for the question. Please see the link below for our return policy. Also in checking the model number provided I can verify the PartSelect Number: PS11745957 is the correct lid switch for your appliance. Hope this helps!
https://www.partselect.com/Thirty-Day-Returns.htm
3 people found this helpful.
Was this helpful?
Thank you for voting!
Stephen
March 10, 2018
When filling, water starts filling, then stops, starts and stops several times before it's done filling. I don't do anything to start it again. Goes on and off by itself.
For model number LSB6300PW4
Hello Stephen, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: water level switch, water inlet valve, lid switch, temperature switch, and timer. You can test the parts with a multimeter. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11745957
Manufacturer Part Number: WP8318084
Manufacturer Part Number: WP8318084
Brand
Model Number
Description