As water is filling your dishwasher, a float rises along with it. When the float reaches a predetermined level, it shuts off the flow of water, thereby preventing a leak.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not fill with water
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Kenmore, Whirlpool, Maytag.
Part# WP8268895 replaces these:
AP6012276, 8268895
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
4.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
1
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Paul T - July 18, 2018
Verified Purchase
An easy inexpensive fix
The float assembly of my dishwasher melted during a wash cycle. I had no idea what it did and I can advise no water will enter your dishwasher if this part is not functional. I ordered the part, it came 2 Days later and it slotted into place. A fast fix and no call out fee or repair service required.
★★★★★
★★★★★
Michael S - January 19, 2024
Verified Purchase
Dishwasher float
Part was a perfect match. However the cost is way to much.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Pan leaked at the float/switch penetration
1. do not order or buy anything before examining the tension nut and washer. 2. Unplug the unit. 3. Open the switch box before trying to remove the float. Two types; easiest is pin based and lifts out easily. If the float catches, it likely has a headed bottom and needs an assist to lift past the stop flanges. 3. Using a standard ohmmeter, check for continuity. If it checks no need to replace. 4. Check float and assembly for abnormalities; cracks, lime deposits, etc. 5. Now decide what needs replacing. Did all my work with relative ease without pulling out the appliance. A couple sequences may need realigned.
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
January 19, 2018
Is there anyway to get a picture of the stem? I pulled this float valve up, and now it doesnt seem to lock into the hole.
Hello Mark, Thank you for your inquiry. Although we do not have a picture or video for this exact part number, I have included a link to a similar float. Hope this helps!
https://www.youtube.com/watch?v=xZY_PIp1YRw&list=PLD984081941E1E8CD&index=184&t=6s
6 people found this helpful.
Was this helpful?
Thank you for voting!
GARY
December 20, 2018
Would not clean as usual. Replaced defective heater element and the cutter blade assembly. Clean light blinks and can do nothing to make it quit blinking or start. When i push the cancel drain button a motor starts and continues to run until it is pushed again.
For model number MDB6709AWQ1
Hello Gary, thank you for your question. There are a few parts you will want to look into to determine what the issue is. We would recommend checking the Turbidity Sensor Part Number: WPW10705575, High Limit Thermostat Part Number: WP661566, Capacitor Part Number: WPW10334457, Bi-Metal Fuse Part Number: W10258275. If these parts are tested and are in working order, the issue may be the electronic control board itself. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jason
July 4, 2019
My float is leaking out the bottom of the pan - looking for a new washer for this - can i buy it separately? Does it come with the switch assembly for $51?
For model number 665.13762k600
Hello Jason, thank you for your question. The Nut and Gasket for this Float Assembly are sold separate. The Gasket is part PS11746142 and the Nut is part PS11747059. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Laurie
August 11, 2017
My dishwasher was leaking and while trying to disassemble to clean traits or filter (which I didn't find) I broke this piece at the stem. Can't figure out how you would replace it. Is this the whole assembly? I also need a door gasket
For model number Gu2275xtvy1
Hi Laurie,
Thank you for the question. This is the top part of the float with the stem you would need. You should be able to just push to float into place by guiding the stem back into the hole.
Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Peter
December 9, 2023
There is a slow leak at the base of the overfill float which allows water to run into the washer pan after the cycle is complete, necessitating my turning off the water valve. Over the past year I have used the dishwasher very little with lapses exceeding a month. Have gaskets dried out?..or do particles keep the valve from closing? or...??????
For model number KUDPOIDLWH3
Hi Peter, thank you for the question. Check to make sure the water inlet hose and sump seal are not damaged or worn-out and are leading to water leakage. If this does not solve the issue, we would recommend checking the float switch, part number PS11745484. The float triggers this float switch to shut off the flow of water into the dishwasher. Good luck with the repair!
This kit includes the switch, lever, seal and standpipe.
Water that fills your dishwasher lifts the float, and when it reaches a certain level, the float acts as a trigger for the float switch. The float triggers the swi...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11745483
Manufacturer Part Number: WP8268895
