Dishwasher Upper Dish Rack Wheel Mount Specifications
This part is located on the top dish rack with two per side. It is sold individually. This upper dish rack wheel mount can be used on either side of your dish rack. It is sold individually. The part includes the wheel and support, which attaches to the dish rack and allows it to slide in and out easily
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Noisy | Not cleaning dishes properly | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Whirlpool, Kenmore.
Part# WP8268743 replaces these:
AP6012252, 8268743, WP8268743VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
29 Reviews
4.9
Filter By Rating:
5 Stars
27
4 Stars
1
3 Stars
0
2 Stars
1
1 Star
0
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Diane N - October 31, 2023
Verified Purchase
PERFECT REPLACEMENT
I looked for installation directions online, using the manufacturer's part number...found a perfect how to video and followed it. The whole process took about 15 minutes and now, my upper rack is solidly attached and working perfectly.
★★★★★
★★★★★
Tom H - July 28, 2022
Verified Purchase
Right product
Part was correct and fit and worked as it should however in my opinion was too expensive for a moulded piece of plastic. On top of that I needed four of them .
★★★★★
★★★★★
SHEENA M - December 19, 2021
Verified Purchase
Ingwenya
Thanks it was the correct part, and it fits perfectly.
★★★★★
★★★★★
Peter N - February 23, 2021
Verified Purchase
Very easy
Excellent service with details that made installation easy.
★★★★★
★★★★★
Joanne N - February 11, 2021
Verified Purchase
Great part
The part was exactly what we needed and delivery was very fast. Thank you.
★★★★★
★★★★★
C B - November 10, 2020
Verified Purchase
Fast Delivery and a Perfect Fit
The part we needed to repair our dishwasher arrived in no time and was exactly as ordered. We fixed the top shelf in minutes. Convenient and efficient. Thank you!
★★★★★
★★★★★
Valerie C - September 14, 2020
Verified Purchase
Easy repair
The parts came fast and were easy to put in.
★★★★★
★★★★★
Carmen W - July 28, 2020
Verified Purchase
Easy repair (with a little help from YouTube)
The mounts are working perfectly, and our dishwasher is back in business. Because we didn't note the placement of the mounts on the rack before we pulled the old ones off, we had to watch some YouTube videos to figure out where to install them. All good now!
★★★★★
★★★★★
Michel T - May 26, 2020
Verified Purchase
The right place
This part was exactly what I needed. Dishwasher was fixed in 5 min. No tool needed. Great outcome.
★★★★★
★★★★★
Dane P - May 19, 2020
Verified Purchase
Correct part, easy swap
Exact match to my part. This is an easy snap into place part.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 37 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Worn dishrack wheel mount
This wheel mount broke from normal use and made the upper dish rack disconnect from the sliding arm that extends it outside the dishwasher body so that you can fill it. The part was delivered quickly and was easy to install using just a screwdriver to loosen the retainer clip on the end of the extension slide. Once the retainer clip was removed, the new part was slid into place and clipped onto the rack. The install was complete.
Other Parts Used:
Jason from Todd, NC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
525 of 538 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wheel mount had broken so that the wheel was disconnected from the mount on the upper rack, making the rack unstable.
I had to fiddle with the mount a bit to get it on the rack properly. Then I pulled back slightly on the inner part of the end piece of the track while also pulling the top of the piece back and released the inner tip of the piece, allowing the end piece to be removed. I placed the new wheel in the track and replaced the end piece.
Super easy and a small fraction of what a repairman had told me the part would cost.
Other Parts Used:
Elizabeth from San Francisco, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
387 of 400 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top dw rack fell off of rollers
Amazingly, this not-too-old dishwasher's plastic parts that hold the top rack onto the sliders became brittle (a real design flaw, in my opinion) and the tabs that held the rollers in place all broke off. With the right parts and the great instructions on this site, the repair was fairly easy and we saved a lot of $$ by not having to call for service. Just follow the instructions...
Each Molded one-piece plastic upper dishrack wheel mount includes a tiny plastic spring clip which hold the mount in place on the upper dish washer rack. These clips become dry and britle over time and snap off. Because they are molded in the wheel mount itself you have to replace the entire wheel mount assembly
Other Parts Used:
Lee from St. Clair Shores, MI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
106 of 184 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the upper rack wheels had crumbled
the parts only took a few days to arrive, and it took me about 2 minutes to install them-no tools were required. i took out the end plugs from the slider bars, slipped out the old broken wheel parts, snapped on the new ones, slid the upper rack into the slider assembly, popped the end plugs back into place and VOILA!!
aside from the expense of the parts- much better to go this route rather than hire a repair guy to do it!!
Other Parts Used:
Nancy from Gilbert, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
84 of 148 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels Holding top rack broke
Pull the dishwasher out, unscrew the old wheel assemblies and screw in the new ones, that easy, anyone could fix this problem, it is a poor deisng though, the inside of my dishwasher is stainless and the only thing to go bad are the plastic parts
We replaced all four. You unclip the two front parts on the top drawer to pull it all the way out of the dishwasher. Unsnap the old mounts and clip the new ones on. Slide the top drawer rack back in and replace the two front clips.
This was truly an easy repair!
Other Parts Used:
Heather from Trinity, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
79 of 141 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clip thing that attaches rack to wheel on track broken.
Took stop off end of track by smooshing spreader things together with butter knife, so they would fit through holes. Maneuvered wheel on track and clip on rack. Put the stop back on.
Other Parts Used:
MELINDA from CINCINNATI, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
75 of 139 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel broken off of top rack of dishwasher
The phone staff was so patient and helped me with the schematic and my model number to be sure that I had the right parts. I did the repair myself and saved so much money. Thanks.
A wheel on the upper rack had fallen off. The wheel mount had worn.
Because the dishwasher is 15 years old I decided to replace all 4 wheel mounts. They were all worn and not clipping to the rack firmly. The repair is obvious. No tools required. Remove the stops on the end of the rack slides (manually squeeze the top of the stop and pull up, or you could use needle nose pliers) and slide the rack out. Just remove the old wheel mounts and clip the new ones in place. Slide the rack back in and snap in the stops.
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeremy
July 20, 2017
I need to replace all four of my upper dishrack wheels, does this purchase include just one?
Hi Jeremy, you are correct, there is only one wheel in this mount kit WP8268743. Please let us know if you have any further questions.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Erica
July 20, 2017
What are the specs for this part need to know if it’ll fit
Hi Erica, this upper dishrack wheel mount measures to be about 4.5 inches high, 2 inches deep, and 1 inch wide. I hope this helps.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Don
April 29, 2018
I have purchased from you 4 wheel mount part # ps11745459, two for each side of the upper dish rack. All my old wheels have been removed. Do the new wheels go on center and rear, or center and front, on each side
For model number Kudio1ilwh2
Hi Don, Thank you for the question. The wheel mounts are on the middle and rear of the dishrack. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Dennie
July 20, 2017
I’m having troubles making this repair. How do I remove the stop track
Hello Dennie, we recommend using a smaller flat blade screwdriver. You can use it to press the small retainer clip inwards so that you can push the stop up and easily remove it. Best of luck with this repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Donald
December 13, 2019
How do I remove the clip at the end of rack to install new part number 8268743 (WP8268743)?
For model number KUDI01ILB52
Hi Donald,
Thank you for your question. To remove the retainer clip use a screwdriver to loosen the it on the end of the extension slide. Once the retainer clip is removed, the new part will slide into place and it clip onto the rack. We hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rose
July 27, 2021
Need to replace upper rack and wheels, can you pls let me know how to do it and cost for parts?
For model number WDF590SAJM
Hello Rose, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS11752595 for the Upper Rack and Part #: PS10065979 for the Rack Adjuster with the Wheels. There is a video on how to install the Rack and the Adjuster under the Rack Adjuster PS10065979 on the site. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
DIANNE
November 2, 2021
How do you properly take the dishwasher top assembly out.
Hi Dianne,
Thank you for your question. Here is a link to one of our YouTube videos that you may reference on how to install an upper dishrack, https://www.youtube.com/watch?v=dPmgQFDdUcY. Both the dishwasher and the upper rack in the video may appear different from yours, but it will give you a general idea on how to install the part. We hope this helps! Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Fred
May 22, 2023
Video showing how to replace upper rack wheel mount
For model number KUDIO1ILBL3
Hello Fred, thank you for the question. According to our research, we are providing you with instructions that will help you install the upper rack wheel mount.
1- Remove the upper dish rack from the dishwasher by removing the end cap from the rail.
2- Now you have access to the upper dish track wheel mount.
3- Take a screwdriver to press on the mount and lift it off the rack.
4- Put the new wheel on, lower it down into place, and turn it so it is aligned with the rack.
5- Now snap it into place.
6- Put the dish rack back into the dishwasher.
We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kimiyo
May 7, 2019
Need replace for upper dish rack wheel mount. Plastic part was broken. I can read wheel parts number 3379676 or 3385088 and 826876. Which one should I order ? Better to buy 4 of them ? How many in your package. Thank you for your help
For model number KUDK03CTSSO
Hi Kimiyo,
Thank you for your question. The part number listed under your model number for the lower dishrack
wheel is PS11745457. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
JAMIL
June 12, 2019
Is part number wp8268743 is adequate for model kudi01ilbl2
For model number KUDI01ILBL2
Hello Jamil, thank you for your question. Yes, this is compatible to your model.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
