Maytag/Maytag_Thumb/33138.gif
See part 33 in the diagram
Replacing your Whirlpool Range Main Power Terminal Block play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Main Power Terminal Block

$34.68   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11745232
Manufacturer Part Number WP8203546
Manufactured by Whirlpool
Product Description

Main Power Terminal Block Specifications

Sold individually.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo, Cooktop.
This part works with the following products:
Whirlpool, KitchenAid, Amana, Roper.
Part# WP8203546 replaces these:
0042194, 0088776, 0091625, 0306378, 0310029, 07728300, 14200347, 14205049, 14210916, 14221418, 14253826, 14254043, 14266994, 241212, 258076, 3184673, 4157955, 4326821, 4332345, 4363438 ... Show more , 4363823, 4371409, 4372627, 4449868, 51234P01, 570022, 661457, 702284, 8203546, 878191, 879428, 9757403, B5003401, CG980049, M4D41, R0167089, R0756503, R0762020, W10246624, Y0042194, Y0088776, Y0091625, Y0306378, Y0310029, Y07728300, Y702284 Show less
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Kristin
    July 15, 2019
    Oven will heat but not all the way (set for 350c but only goes to 240c). Broiler element does not come on but when tested has continuity. Has 21 ohms resistance.
    For model number ZRT6510WW
    Hi Kristin, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. I hope this helps. Thank you and have a great day!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Greg
    September 4, 2019
    Stove top burners work but oven will not work (broil or bake) the electric control is not working either
    For model number ywfe371lvb0
    Hello Greg, thank you for your question. That sounds like an issue with the electronic control board. PartSelect Number PS11755353 is the board in white, and PartSelect Number PS11755353 is the board in black. I hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Barbara
    September 20, 2017
    The power is out on my oven, door is locked as i was self cleaning. There is power coming in from wall and we did replace thermosat already but still doesn't have power, cant open door. What does the main power terminal block do, could that be the problem
    Hi Barbara, Thank you for your inquiry. When you use the self clean option, as a safety feature the oven door will remain closed until the oven has cooled. If the oven has cooled and the door is not opening you will need to unplug it or turn the circuit breaker off for a few minutes to see if that resets it. Then press on/off and the cancel button for 30 seconds to see if this resolves the issue. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Steph
    August 7, 2018
    Im trying to figure out what part i need to buy . The power shut down to everything while cooking . Cant turn on any function. Is this what i need to try and fix this or do i need the mother board replacement part
    For model number RF368LXKQ
    Hi Steph, Thank you for your question. It could be this part. If you see any physical damage to it. However if you do not then it is likely your control board that is the issue. I hope that helps. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Matt
    May 10, 2019
    While using the "self cleaning" feature on this range/oven, and when the oven was very hot, there was a loud "pop" and flash of light from inside. Now neither the baking or broiling elements work. What part(s) do i need to replace?
    For model number RF376PXYB1
    Hello Matt, thank you for inquiring. You may need to replace either the Bake Element part PS11740695 and the Broil Element part PS11743368, the Oven Thermostat part PS11740811, or the Main Power Terminal Block part PS11745232. We hope this helps.

    Was this helpful?
    Thank you for voting!
    Kristin
    July 15, 2019
    You said i could possibly need an oven sensor to fix my problem. Do you have these in stock and what is the part number? Thanks for the help.
    For model number ZRT6510WW
    Hello Kristin, thank you for inquiring. The replacement Oven Temperature Sensor for your model is part PS11757456. The current availability for it is listed to the right of the "Add to Cart" button in the part description. Good luck with your repair!

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Whirlpool Range Main Power Terminal Block

      Replacing your Whirlpool Range Main Power Terminal Block play video
      Customer Repair Stories
       Average Repair Rating: 4.2 / 5.0, 6 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        lighting strike
        replaced the suppressor and terminal block oven works
        • Frank from Silverhill, AL
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WP8302143, WP8203546
        11 of 20 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Incoming power hot lead broke loose from mounting block and short-circuited
        First I turned off power at the service panel. Then, I pulled out the range and tried to remove the access panel. The screw which held the black lead from the incoming power to the range wiring terminal had broken loose from the mounting block. It had welded itself to the panel, so I had to pry it loose. I tried to reattach it to the mounting block, but the block was cracked.

        I turned on power at the service panel and used my digital multimeter to test the AC voltage of the receptacle to make sure it fell within the correct limits.

        When the new mounting block and power cord arrived, I removed the screw that held the broken mounting block to the back of the range. Then, I used a screwdriver to remove the leads that attached the old power cord to the broken mounting block and range wiring terminals. The screw and nuts which held the old black lead and range wiring terminal to the block were welded together. This was the most difficult part of the repair. I was able to back them off a little bit, but not enough to remove the range wiring terminal. While holding one end of the screw in the pliers, my Dad used the heavy duty cut off wheel on my Dremel tool to cut the screw in half and free the terminal.

        Then, we reversed the process to attach the new wiring block to the back of the range, incoming power cord to wiring terminals and range wiring. We plugged it back in and had it working before my dinner party.
        • Heather from Pittsburgh, PA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Pliers, Screw drivers, Socket set
        • Parts Used:
          33002973, WP8203546, WP112432
        7 of 11 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Loose terminal caused block to overheat and break
        Removed all terminals and block mounting screws. Repaired one burnt terminal and reassembled. Replacement part was an exact fit and reassembly whnet very well.
        • Dana from Black Mountain, NC
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WP8203546
        6 of 9 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        I snapped a bolt on the main power terminal block when connecting the pigtail.
        Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver. Connect the new main power terminal block to the range using the two screws. Reconnect the red, black and white electrical wires coming from the range using one nut for each wire. IMPORTANT: do no over tighten the nuts because the bolts could snap. Reconnect the pigtail and secure the small metal panel covering the main power panel.
        • Frank from Palm Coast, FL
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers, Socket set
        • Parts Used:
          WP8203546
        3 of 6 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        wire came loose and shorted out
        Ordering the part online was easy. It arrived in a timely manner. I found a terrific video online showing how to install the terminal. It was so easy. Thank you for the great instructional video.
        • Elizabeth from HOUSTON, TX
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers
        • Parts Used:
          WP8203546
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Block broke
        Unplug power cord, remove wires from block. take 2 screws out. replace with new block about 15 mins. Done
        • Edward from Crimora, VA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers, Socket set
        • Parts Used:
          WP8203546
        1 of 3 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11745232
          Manufacturer Part Number: WP8203546
          Brand
          Model Number
          Description
          Kenmore
          20133
          Range - Kenmore Range/Stove/Oven Model 20133(1988) Parts
          Jenn-Air
          20135
          Range
          Kenmore
          20214
          Range - Electric Range
          Kenmore
          20215
          Range - Electric Range
          Kenmore
          20234
          Range - Kenmore Range/Stove/Oven Model 20234(1988) Parts
          Jenn-Air
          20236
          Range
          Jenn-Air
          20237
          Range
          Jenn-Air
          20239
          Range
          Kenmore
          21244
          Range - Kenmore Range/Stove/Oven Model 21244(1988) Parts
          Roper
          2222A00
          Range - Roper Range/Stove/Oven Model 2222A00 Parts
          Roper
          2222A2A
          Range - Roper Range/Stove/Oven Model 2222A2A Parts
          Roper
          2222C00
          Range - Roper Range/Stove/Oven Model 2222C00 Parts
          Roper
          2222C2A
          Range - Roper Range/Stove/Oven Model 2222C2A Parts
          Roper
          2222H00
          Range - Roper Range/Stove/Oven Model 2222H00 Parts
          Roper
          2222H2A
          Range - Roper Range/Stove/Oven Model 2222H2A Parts
          Roper
          2222L00
          Range - Roper Range/Stove/Oven Model 2222L00 Parts
          Roper
          2222L2A
          Range - Roper Range/Stove/Oven Model 2222L2A Parts
          Roper
          2222W2A
          Range - Roper Range/Stove/Oven Model 2222W2A Parts
          Roper
          2242A2A
          Range - Roper Range/Stove/Oven Model 2242A2A Parts
          Roper
          2242C2A
          Range - Roper Range/Stove/Oven Model 2242C2A Parts
          Roper
          2242H00
          Range - Roper Range/Stove/Oven Model 2242H00 Parts
          Roper
          2242H2A
          Range - Roper Range/Stove/Oven Model 2242H2A Parts
          Roper
          2242L00
          Range - Roper Range/Stove/Oven Model 2242L00 Parts
          Roper
          2242L2A
          Range - Roper Range/Stove/Oven Model 2242L2A Parts
          Roper
          2362X0A
          Range - Roper Range/Stove/Oven Model 2362X0A Parts
          Roper
          2362X1A
          Range - Roper Range/Stove/Oven Model 2362X1A Parts
          Roper
          2362X2A
          Range - Roper Range/Stove/Oven Model 2362X2A Parts
          Roper
          2496*0
          Range - Ranges, Electric*
          Roper
          2496*0A
          Range - Ranges, Electric*
          Roper
          2496*1
          Range - Ranges, Electric*

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service