Product Description
Control Knob Specifications
This knob is light gray and is used on platinum-colored models. Sold individually and accepts a D-shaped shaft.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Control Knob
Troubleshooting
This part works with the following products:
Washer, Dryer.
This part works with the following products:
Whirlpool.
Part# WP8181859 replaces these:
AP6011741, 46197020472, 8181859, 8519396
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Fred M - January 16, 2019
Verified Purchase
Easy repair with knob
The replacement knob was easy to install. Thanks for the fast service of three days
JOSÉE A - August 29, 2018
Verified Purchase
Fast delivery,
The part is in perfect condition and it was easy to replace it
Amin K - July 27, 2018
Verified Purchase
it worked
the part worked as advertised on my frigidaire
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 11 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Belt Wheel was broken at axle. Terrible noise.
Removed the top and back of dryer with screw socket. It was quite easy. Then, I removed the broken wheel by releasing the tension spring. I replaced the wheel. The toughest part was re-threading the belt. But, even that was simple. The dryer runs smoothly and quietly again!
Other Parts Used:
-
eric from Boulder, CO
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set, Wrench (Adjustable)
104 of 123 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cracked burner know
If you remove knob and sleeve remains, you have to use needle nose pliers to remove. Pull straight up, don't wiggle back-and-forth too much. If you put too much pressure on glass-top, it can crack. Prying is DANGEROUS on glass-top stoves.
Other Parts Used:
-
Donnette from Fresno, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
76 of 144 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken control knob,damaged printed ckt.in control.
Removed top panel from machine(3 screws,access to rear was necessary),removed detergent dispenser to access screw for control panel,removed control knob and unfastened control panel,disconnected harness from ECU,unfastened harness from retaining clips,removed control panel&uncliped circuit board assy.from panel,transferred buttons to new ckt.board assy,reassrmbled control panel&reinstalled,routed harness,installed new knob,verified operation,reinstalled top panel&dispenser.
Other Parts Used:
-
Theodore from Mastic Beach, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
33 of 45 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic Knob Cracked off machine
It was super easy...as the knob (Part No. 18 on our Whirlpool Duet Dryer) broke off cleanly leaving the metal pin exposed....(we had been turning it with pilers in the interim) so I just popped the new knob on and we were good to go! It was really easy to do and easy to locate the necessary part on your site. I won't hesitate to use your company and website again. Thank you for making all the parts available and saving us a service call!
Other Parts Used:
-
Susan from Glen Ellyn, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
20 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The knob that controls the wash setting broke
It only took a few seconds to slide on the new knob after it arrived by UPS. The part arrived sooner than scheduled. Great service and product.
Other Parts Used:
-
Richard from Tempe, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
7 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control Knob Broke
I removed the old control knob by pulling it off and installed the new one. Your service was great!
Other Parts Used:
-
Bill from Chanute, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
7 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the plastic control knob to set the washing cycle split in two
slip the knob onto the exposed axel that selects the cycles
Other Parts Used:
-
Gail A from Cave Creek, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken door handle
removing the old srews was a little difficult but once it was done it was much easier to replace the new product.
Other Parts Used:
-
linval from raleigh, NC
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control knob broke - because entirely plastic, turning interior metal selection rod
Pulled off the broken knob. Fairly disgusted with Whirlpool for not bothering to put a metal / aluminum sleeve inside to avoid the exact breakage I experienced. Part Select, however, had the part, got it to me exactly in the time frame I asked for and it was the correct part. I would definitely use Prat Select for any such need.
Other Parts Used:
-
Patricia from Brentwood, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
knob broke off
easy as pie - ordered part. arrived in a few days and popped it back on. easy as pie. great service, quick! will definitely return to buy other parts!!!
Other Parts Used:
-
Renaldia from Cornelius, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeff
January 20, 2023
We have a Whirlpool Duet washer, the control knob has broken so it will not stay on the shaft. It is a light gray color. What is the correct replacement.
For model number GEW9200LW0
Hi Jeff,
Thank you for your question. The part number listed under your model number for the gray knob is PS11744940. You may order it online or by calling customer service. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744940
Manufacturer Part Number: WP8181859
Manufacturer Part Number: WP8181859
Brand
Model Number
Description