This handle may appear white, but is light gray in color called Platinum. This door handle for your washer is sold without screws, they can be ordered separately, or you can reuse the existing screws if they are in good shape. To replace this part, simply unscrew the handle and screw the new one into place.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Door Handle
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close | Door latch failure
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool.
Part# WP8181846 replaces these:
AP6011739, 8181846, WP8181846VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
35 Reviews
4.6
Filter By Rating:
5 Stars
27
4 Stars
4
3 Stars
3
2 Stars
0
1 Star
1
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dann B - March 4, 2024
Verified Purchase
Easy repair. Worked as expected.
Part was cancelled initially with no notice. Re ordered after not seeing it for 2 months. received the part. Looks and fits perfectly. But way overpriced.
★★★★★
★★★★★
Sandra M - September 21, 2023
Verified Purchase
Easy repair
Handle for washing machine. Very easy and works well.
★★★★★
★★★★★
Corie B - June 19, 2023
Verified Purchase
easy repair...perfect - exactly what i needed
shipped quickly. easy to install...2 screws.
★★★★★
★★★★★
Duaine M - April 7, 2023
Verified Purchase
2 minute repair
This part was a perfect replacement for the cracked original. It shipped immediately, arrived in 24 hours and the repair took 2 minutes.
★★★★★
★★★★★
Paul T - April 3, 2022
Verified Purchase
Easy repair
The part I believe was identical to the original. Very detailed instructions were given, even for simple installation. I am definitely keeping this site for future part requirements.
★★★★★
★★★★★
Bonnie H - October 10, 2021
Verified Purchase
Washer door handle
The part was exactly what was needed and was in stock. Shipping was quick and repair was easy. Love the videos! Thanks!
★★★★★
★★★★★
Lisa S - September 22, 2021
Verified Purchase
Washer door handle
The exact part and easy installation. The attached video was a great add-on too! Thanks!
★★★★★
★★★★★
Kate H - September 22, 2021
Verified Purchase
Could not have been easier
Truly, I was told about the broken part Sunday and had the part replaced two days later. Brilliant service. Surprisingly fast. Many thanks
★★★★★
★★★★★
Dave H - August 24, 2021
Verified Purchase
Easy repair, part came fast but over priced.
Part was perfect for what I needed but was way too expensive. I couldn't believe a small plastic handle would cost so much. Yes, it was the perfect part and delivered across the country the next day but you pay extra for the parts and you pay for shipping. If you can accept inflated prices for old parts with fast service then this place does a great job. I will use them again, but I will probably complain about it.
★★★★★
★★★★★
Mina L - August 14, 2021
Verified Purchase
Perfect
So happy with it
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 69 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
broken plastic washer door handle
Just required removal of two screws, placing the new handle and reinstalling the two screws. Easiest repair I've ever done!
Other Parts Used:
dave from woodway, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
540 of 549 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle broke off
Removed the 2 scews and pulled the broken handle off. placed new part on and attached with the 2 screws. Very easy not to mention I received the part in just 2 days! Wow, now that is fast!
Other Parts Used:
Paul from Burns, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
157 of 239 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic handle broke; and needed replacement
Removed the old screws with a phillips screwdriver, screwed the new part on. 1 minute tops!
Other Parts Used:
Carl from Hahira, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
95 of 177 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle broken at screw connection
First I removed the screws and removed the broken pieces. I then attached the new handle with the removed screws. Easy as 1..2..3...
Other Parts Used:
Michelle from Merrillville, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
95 of 178 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Handle Cracked
Removed screws, took cracked handle off, put new handle on, and replaced screws. So simple.
Other Parts Used:
Tom from Frisco, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
89 of 169 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced Broken Door Handle
So easy - i just replaced the door handle with screw driver
Other Parts Used:
Alex from Edina, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
84 of 164 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic door handle broke
It took more time to find the right screwdriver bit than to do the replacement. Removed the 2 screws holding the handle. Put new handle in place. Put the 2 screws back in. Done.
Other Parts Used:
Luis from Sharon, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
6 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not pump water out at end of cycle.
First you need to remove the water from the machine, a shop vac hooked to the drain line works very well. Next remove the lower front panel ( two screws at bottom corners) and unplug pump. Remove the hose clamps and remove the hoses. Remove the screw at the front of the pump assembly and pull toward you and lift up. Instal new pump in reverse order.
I took off the front lower panel and the top panel. I also removed the door. I used the screwdriver to remove the first spring and then loosed the screw on the second ring that holds the bellow in place.
Ask our experts a question about this part and we'll get back to you as soon as possible!
21 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephanie
January 25, 2018
Does this handle work for my Whirlpool handle? The original one cracked off. The screws and a piece of it are still in tact.
For model number GHW9200LW
Hello Stephanie, Thank you for your inquiry. Yes, we do show that this part will work for your model. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Lissa Ivey
November 22, 2017
Is this handle the correct handle for my washer ? (manufacture part # wp8181846?)
For model number GHW9250MTO
Hi Lissa,
Thank you for your inquiry. Yes, this handle is the correct part for your appliance. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Jerrette
February 10, 2018
Is part #ps11744938 compatable with model #ghw9400pw4
For model number GHW9400PW4
Hello Jerrette, Thank you for your inquiry. Yes, we do show this part as compatible to the model number you supplied. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Lee
March 2, 2018
The handle is on the right side of the door as you face the washer. Will this part number fit on that side of the door?
For model number GHW9400PW0
Hello Lee,
Thanks for your question. Yes, this part fits on the right side of the door.
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jenny
May 1, 2018
Will this handle work for my model?
For model number GHW9150PW4
Hello Jenny, thank you for your question. Yes, Door Handle WP8181846 is the correct replacement door handle for your specific appliance. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
David
December 3, 2017
The plastic handel broke, but the screws that held it in place doesn't seem to be either a phillips nor a slot head screw. What type of driver does it take to remove the screws?
For model number GHW9100LW2
Hi David,
Thank you for your question. From what I am seeing underneath your model information the screws are a torx 20 driver. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
December 15, 2017
Will this door handle work on my washer?
For model number GHW9400PW1
Hello Susan,
Thanks for your question. Yes, this platinum door handle is compatible with your washer.
I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
George
August 24, 2017
Does the bolts come with handle?
For model number GHW9300PW4
Hi George,
Thank you for the great question. The screws that are used to install the handle are sold separately. You will need to order PS11741601.
Hope this helps!
I need a washing machine door handle for this model number. What would the part number for this be? Thank you
For model number GHW9250MW1
Hello Johnann, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS885425 for the Biscuit handle and PartSelect Number: PS11744956 for the Pewter color handle. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Belinda
June 25, 2019
Will this handle fit my washer? Manuf. Part number wp8181846
For model number GHW9250ML2
Hello Belinda, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11744938. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
