Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Donna L - October 6, 2020
Verified Purchase
Part fit and I had the dryer repaired in an hour
Part was new condition and delivery was super fast!
★★★★★
★★★★★
Patrick A - October 26, 2018
Verified Purchase
Great part worked well
This took about 2 minutes to install, funny, I would not have needed it if the video on how to install the fan, hadn’t told me to put a wrench on this nut instead of the actual shaft
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replaced a broken pulley.
Half of my pulley was broken off so there were no wrench flats to take it off. I was able to remove it using Channel Locks and the 7/16 wrench shown in the video.
Hint: Use a one gallon ice cream bucket to hold up the drum while connecting the belt. It makes it much easier and gives you more clearance.
Other Parts Used:
Brian from IMLAY CITY, MI
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
9 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to repair and replace dryer motor pulley and pully
this was very was very easy. But I deviated from the You Tube instructions. One to release the motor pulley. I needed to use 2 adjustable wrenches for a longer lever. I needed to use a hammer to help release pulley. Second to remove the dryer cable I needed to use a small screw driver to aid in the release. ---- the part from the company was a perfect fit.
Other Parts Used:
Rob from GAITHERSBURG, MD
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench (Adjustable)
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer drum would not turn
Ordered $245 worth of parts for four possible fixes. None of the four fixes worked. Used an appliance repair person to do more troubleshooting. Fourteen days later and after spending an additional $380 ($625 total), a new control panel was installed. That solved the problem.
Drum not turning; accompanied by loud "screeching" sound.
Followed instructional video provided for this type of repair after diagnosing problem via of 'troubleshooting' on PartsSelect site. Simple, safe, and relatively easy (minimal mechanical knowledge helpful). Second time using PartSelect; washing machine repair ~ 6 mo. previous. PartSelect was spot-on with that repair as well, saving hundreds of dollars.....my go-to site for appliance repairs and pats....make it yours as well and you will NOT be disappointed! Fast, prompt shipping.
Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Manuel
January 8, 2018
I'm replacing the belt but i notice the plastic by the the motor pulley is damage since is an old dryer can i leave without this part.
For model number Rex4634kq1
Hello Manuel, Thank you for your inquiry. It is not usually recommended as it protects the shaft. You can purchase it with the pulley, part# WP8066184. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Lesley
May 8, 2018
I cant get the old one off, what do i do?
Hi Lesley, Thank you for the question. If the pulley is stuck and can not be unscrewed, you can try some WD-40 or similar products. If the pulley is not able to be removed, you may need to replace the motor. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
J
December 8, 2019
Does this pulley have left hand threads counter-clockwise to tighten, clockwise to loosen?
Hello J, Thank you for the question. You will need to turn Counter Clockwise to loosen the pulley. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
William
August 14, 2021
Que motor pelea es compatible con este modelo admirar. Ya que enrosca para la izquierda e comprado y ni me sirven ya que enrosca para la derecha. Por favor cual seria compatible. Gracias.
For model number Admiral. MOD NO ADE7005AYW
Hola William, gracias por tu consulta. Mostramos el motor de esta secadora como parte # PS11739459. Espero que esto ayude.
I just replaced the idler wheel and started the dryer and burning plastic smell. I opened the dyer up again and noticed there is a plastic thing behind the motor pulley. What is the number for that part? Why would it melt?
For model number LEQ9558KQ1
Hi Adrienne, Thank you for your question. Unfortunately I could not say as to why this part melted. The only thing that I could think of would be that the belt was installed incorrectly and so it slipped and with friction melted that plastic piece. That plastic part is only available with the motor. So to replace it, you would have to replace your motor. I hope that helps. Good luck with your repair.
Wp8066184 is the motor pulley compatible with a dryer model # mde3706azw?
For model number MDE3706AZW
Hello Kevin, Thank you for contacting us. I have researched the model you have provided and have found that unfortunately Maytag is not selling the pulley separate from the motor assembly part number PS11739459. Thank you for your question!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Scott
July 27, 2023
Can you please tell me which motor pulley will fit on my MAYTAG DRYER which is model number:
MDE3000AYW
Thank you!
For model number MDE3000AYW
Hello Scott, thank you for reaching out. The motor pulley for your model is not sold separately, it comes as a part of the motor assembly, part number PS3500892. We hope this information is useful!
Replaced my motor pulley the last 30 days cause previous one snapped on half. It just snapped in half again, what could the reason be?
For model number AED4475TQ0
Hi Carlos, thank you for contacting us. According to our research, we would recommend checking the drive and motor to ensure that they are properly aligned and are not tightened enough. If the issue still occurs, you may need to replace the motor pulley, part number PS11744884, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Rick
March 10, 2020
Will this fit mde6400ayw dryer motor?
For model number MDE6400AYW
Hello Rick, Thank you for the question. The Motor Pulley for this model is not sold separate from the motor. The Motor will need to be replaced. We hope this helps.
![](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/346995-1-S-Whirlpool-341241-Multi-Rib-Belt-92-1-4-amp-quot.jpg "Multi Rib Belt - 92-1/4" – Part Number: 341241")
