This chrome OEM control knob measures 1 1/2" in diameter. It easily attaches onto the D-shaped shaft in order to allow controls to be used. Refer to your model number and user manual to ensure this part is correct for you. This part is sold individually. We recommend replacing all control knobs for your unit at the same time, as they wear at a consistent rate to one another. This very easy repair should only take a few moments to complete; just slide the old knob off the shaft and the new one on.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Jenn-Air Cooktop Knob - Chrome
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start | Touchpad does not respond
This part works with the following products:
Cooktop.
This part works with the following products:
Jenn-Air, KitchenAid.
Part# WP7737P245-60 replaces these:
AP6011516, 74007918, 7737P245-60, WP7737P245-60VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
18 Reviews
4.9
Filter By Rating:
5 Stars
16
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David L - February 5, 2023
Verified Purchase
Always easy to get parts
Correct part arrived quickly!
★★★★★
★★★★★
Keith I - August 19, 2022
Verified Purchase
they fit perfectly and look good
they arrived quickly and in good shape.
★★★★★
★★★★★
Brian W - July 21, 2022
Verified Purchase
Part in stock
Easy replacement
★★★★★
★★★★★
John P - April 30, 2021
Verified Purchase
Easy repair
Fit and works great
★★★★★
★★★★★
Anne-Marie D - March 11, 2021
Verified Purchase
This was exactly the part we needed
This was exactly the part we needed.Fast shipping. I would order from this company again.
★★★★★
★★★★★
David F - October 1, 2020
Verified Purchase
Easy Repair
Always happy with a part from Partselect. From not working to new in a day !
★★★★★
★★★★★
Colleen L - August 21, 2020
Verified Purchase
It was the wrong one
Unfortunately it was the wrong part so i cannot use it. However service on receiving it was very fast. I will have to return and get the correct part.
★★★★★
★★★★★
Joe L - August 21, 2020
Verified Purchase
Easy repair
My appliance is back in working order
★★★★★
★★★★★
Michael H - May 16, 2020
Verified Purchase
Perfect match
It was a perfect match for the Jenn-Air stovetop unit. Only concern was the price ... but I guess that's what happens with a part that isn't that easy to find.
★★★★★
★★★★★
Teresa H - March 15, 2020
Verified Purchase
Jennair fan knob
Arrived on time and slide into pace with ease once we removed the metal sleeve from old knob... working perfect. great not to have to called drive all over for the hunt ....Satisfied
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 31 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The knob broke during my housekeepers last kitchen clean up.
Opened the package and put the new knob on my fan for my stove top.
Other Parts Used:
Denise from Los Angeles, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
474 of 484 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The burner knob was cracked.
I simply remove the broken knob just like I do when cleaning. To place the new knob, I matched the flat part of knob opening with the flat part of the shaft, returning to off position.
Other Parts Used:
Barbara from Union, WV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
376 of 381 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Having replaced 3 knobs already, I was still experiencing splitting of the knob shaft where it fits over burner control shaft
To reinforce 5 knobs after replacing 3 knobs earlier using the "simple" replacement of knobs: My 19 year old daughter mixed a 15 minute two part epoxy glue and coated the outside of the plastic knob shaft (first placing a q-tip in the center of the shaft opening to protect from glue entry into knob engagement channel). She then wrapped the wire in a close spiral so each turn touched the previous one (like a spring), leaving the wire ends long enough to twist around knob ears to hold firmly in place during cure of glue. She then coated the outisde of the wire turns with more epoxy to encase the wire and secure wire in place. After curing, she cut the wire ends off so they were flush with knob shaft and installed knobs on burner stems. Hopefully a permanent solution as you shouldn't have to modify replacement parts.
Other Parts Used:
Craig from Tucson, AZ
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers
87 of 154 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cracked burner know
If you remove knob and sleeve remains, you have to use needle nose pliers to remove. Pull straight up, don't wiggle back-and-forth too much. If you put too much pressure on glass-top, it can crack. Prying is DANGEROUS on glass-top stoves.
Ordered new knobs from part select ,they arrived very quickly. I took off the metal clips that where in the old knobs.(these clips where still on the metal post because the broke away from the plastic knobs.) Then I just pushed on the knobs nothing to it.
Other Parts Used:
layne from Issaquah, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
72 of 134 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old knob was broken
put new knob on! Ordering process and delivery were flawless--liottle expensive but saved me running around town!
Other Parts Used:
Kathleen from Annapolis, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
71 of 133 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shaft of original burner knob had split and no longer controlled the selector shaft
The broken knob had previously been removed. I grasped the replacement knob between my thumb and forefinger, held the knob in a vertical position and pressed it down onto the selector shaft. The quality control supervisor (otherwise known as "the wife") examined the project and issued a certificate of acceptance. And then cooked dinner.
Other Parts Used:
Douglas from West Cornwall, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
69 of 133 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner knob was cracked where it meets the shaft
Took broken knob off and slid the new one on. DONE!!!
Other Parts Used:
Susan from Wilmington, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
20 of 610 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knobs split and will not turn on burners
Removed old knobs and replaced with new ones.
Other Parts Used:
Daniel from Charlotte, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
19 of 609 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken burner knobs
So simple -- any monkey could do it. Pull off the old knobs and push on the new.
Other Parts Used:
Delton from Nevada, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
19 of 609 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
17 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jen
July 20, 2017
Is this the cost of only one knob? What comes with it?
Hello Jen, this replacement knob WP7737P245-60 is sold individually. It comes as one per package. Thanks for the great question!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Grant
July 20, 2017
In the description this part is listed as chrome brushed but mine is more like a satin or brushed nickel. Is it the same do you think? They look pretty much the same
Hi Grant, this fan knob is chrome brushed as you said, but it is very light in color. According to your model number this is the replacement part you need. I hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Gayle
February 19, 2018
My knob will not even turn. Is this due to the knob being broke inside? Do I need to buy the other part also?
Hi Gayle, Thank you for the question. I suggest remove the knob and try turning the shaft manually with a pair of pliers. If the shaft turns normally then the knob will need to be replaced. If it still does not turn then the switch will need to be replaced. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Daniel
July 20, 2017
I broke my fan knob and need a replacement. I think this is what I need but other users have called it a burner knob, can you confirm this is a fan knob?
Hi Daniel, great question! We can confirm that this WP7737P245-60 knob is the replacement fan knob for your model. Please let us know if you have any further questions.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Marta
November 29, 2018
Thanks for taking my question. Does this part come in metal instead of plastic? The plastic ones keep breaking.
For model number JEC 8430
Hello Marta, Thank you for the question. Very sorry but the manufacture only makes the knob in Plastic. Thank you for your inquiry, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
August 2, 2017
Is this the knob that would replace the down draft fan control knob on my jenn air? Thanks!!!
For model number JGD8430ADB
Hi Robert,
Thank you for the question. The part number PS11744713 is the knob for the fan on model number JGD8430ADB.
Good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Bonnie O'connor
August 8, 2018
My cooktop (jennair jec9536adb) has 5 knobs; the central one, which operates the large, central burner, seems to fit a wider d shaped shaft than the other 4, which operate the 4 smaller burners. Will the replacement part ( WP7737P245-60, Whirlpool) recommended for the 4 slightly smaller shafts also accommodate the central burner shaft & operate that reliably?
For model number JEC9536ADB JennAir
Hello Bonnie, thank you for your question. From the model information provided there is just one knob, part number Knob - Chrome Part Number: PS11744713. This should work on each spot on the unit, and operate the central burner as well. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jo-Anne
November 23, 2019
Does this control knob work on the glass counter top model
For model number JEC9536ADS
Hi Jo-Anne, yes this part works with model JEC9536ADS. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gilbert
August 1, 2017
Need p/n for knobs for burners
For model number JEC8430ads
Hi Gilbert,
Thank you for your inquiry. All of the knobs for your burner are the same. Here is the part number: PS11744713. I hope that helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Alexander
December 5, 2018
Hi. In case i am wrong , can i return these knobs
For model number ps11744713
Hi Alexander,
Thank you for your question. We have a 30 day return policy. Here is a link to our policy, https://www.partselect.com/Thirty-Day-Returns.htm. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
