Fully Open Bake Element (15-1/4" long x 15.5" wide)

After ordering the element, found out it was the wrong element, I needed an 18.5 inch x 15.5 instead of the 15 1/4 x 15 1/2"...I slowly bent the element in shape to fit my oven. It works beautiful.
But for you guys, order the right one. Don't forget to measure your old elements spread from connection to connection. Install the new element and then test to be sure it works proper.

First I removed the two screws that hold the element in place. Then I pulled the element out about 3 inches and disconnected the two wires. Reconnected the new wires, put the screws back in and the oven WORKED!!

Our oven is a wall mounted oven so I could not reach the plugin. Therefore I shut the power off at our breaker box. I then removed the screws that held the old heating element to the oven. Removed the element, slipped connecting wires off of the old element. Next I slipped the connector wires onto the new element and replaced the screws. Turned the power back and and checked to see if oven worked. It did! As you can tell I am a novice at home repair but this worked perfectly!

The cost of new ovens and a having an electrician come out to fix was ridiculous.We looked online fro an alternative and found your part w/ picture (which helped) for only 41.00 w/ tax to fix! We recieved item within 4 days and we fixed it in about 15 min. Thank you so much for saving us tons of money and loads of headache!

On the Saturday before Christmas, during some baking, my heating element we out of my oven! Since I was cooking Christmas dinner at my house on Thursday, I freaked out. Fortunately, we got on the interenet, ordered a new element, paid for 2-3 day shipping, and received it on Wed. afternoon. My husband unscrewed the old element, and put the new one in about 5 minutes. Very easy job, and Christmas was a total success!

Repairmen all wanted a pretty penny to fix the problem, basically buying a new oven would have been cheaper. I ordered the heating element I needed. Once it arrived I took it out of the box and handed it and screw driver to my Son-in-law and as he stood there with a dumb founded look I told him “replace the old with the new one or I will never cook for you again”. Boy did he do the work in a flash, it was easy peasy. I didn’t even break a sweat. I hope this is helpful to your other customers.

It was very easy,it took five minutes to replace it. I disconnected the two leeds from old burner and connected them to the new one.

I just had to take 4 screws out and pull it out and put the new one back in!!

Check the connectors first and the associated wiring, as our stove had been stricken by lightning a couple of years ago. Seems the stove was fairly new we had a service tech replace the stove top relays to correct the shorted out stove top. Unfortunately no one checked the rest of the stove as the oven elements still functioned. What I realized when the bake element failed was the lead wire to the bake element was actually shorted from the lightning to the stove and the element was damaged but still worked. The lead wire was trimmed back and the connector replaced along with the element. The lightning had damaged the unit and luckily we don't bake much as it actually had soldered the connector to the back of the stove. Lesson learned...if your appliance it struck by lightning remove the back and check to assure your stove will operate safely. Thanks for the prompt shipping as everything is good as new now and we are much safer too.

First I removed the two screws that held the element in place. Then after slightly pulling out the wires, I disconnected the two wires on each side. The new part just snapped into the old wires. I pushed the element back into place, replaced the original two screws to hold it into place, and it was all done! Two screws and two wires...done. It took about 2 minutes and this is something I have NEVER done before. The oven works beautifully now!