Part Location Diagram of WP7407P182-60 Whirlpool Range Light Assembly
See part 20 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

1-866-883-8386 Monday to Saturday
8am - 8pm EST

customerservice@partselect.ca

Range Light Assembly WP7407P182-60

★★★★★
★★★★★
3 Reviews

Rated by 6 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$68.68
  In Stock

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS11744525
Manufacturer Part Number WP7407P182-60
Manufactured by Whirlpool
Product Description

Range Light Assembly Specifications

We understand how frustrating it can be when your oven light goes out. There's no need to fret ? we've got the perfect solution with our Whirlpool Light Assembly. This authentic, manufacturer-approved part is designed to securely hold and power your oven light bulb, helping you keep an eye on your cooking without any hassle. Compatibility won't be a problem either! This part works flawlessly with a host of models including selected Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef stoves, ovens, and ranges. Before you start with the installation, please make sure to disconnect your range or turn off the house circuit breaker for your safety. To further safeguard yourself, we advise using work gloves during the installation process. And you're not just getting functional value with our Whirlpool Light Assembly, its sleek and modern design will also give your oven a noticeable upgrade - a functional and aesthetic win. Bring back the light in your oven and keep your appliance performing like new with our Whirlpool Light Assembly.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo.
This part works with the following products:
Magic Chef, Maytag, Whirlpool, Jenn-Air.
Part# WP7407P182-60 replaces these:
74010885, 7407P088-60, 7407P182-60
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.7
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 2.7 / 5.0, 6 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Faulty bulb receptacle
Unplugged the stove and removed the back panel, disconnected the wires from the old receptacle, removed it, inserted the new receptacle, connected the wires, put the back panel of the stove on, plugged in the stove and then checked to see if the bulb was now burning. Success!
Other Parts Used:
  • Kenneth from Lynchburg, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
10 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door hinges broke and stuck/broken light bulb
I killed power
Pulled the back panel
Pulled the door off
pulled light socket wires
reached in and bent in light socket tabs
knocked out light socket
slide in new socket
lifted top of stove (glass)
disconnected glass top wiring
pulled off glass top
pulled both side panels
removed both hinges,
installed new hinges
reinstalled side panels
reinstalled glass top,
reinstalled light socket wiring
installed back panel
installed door
restored power
Other Parts Used:
Range Door Hinge
  • Kenneth from Zachary, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
9 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven door hinges broken
With the back removed, replacing the lamp receptacle is straight-forward. Likewise, the door gasket is very easy. However, in order to replace the hinges, you have to remove the burner glass top (screws underneath the front lip), and inner and outer side panels. Also the supplied hinges mounting holes were not threaded so I had to use my own bolts, lock-washers and nuts in order to attach them. Total time, including a bit of cleaning, was 5 hours.
Other Parts Used:
Range Door Gasket Door Hinge Kit
  • Brian from Lakewood, CO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers
4 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
changed the bottom coil and oven light socet
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires reverse the order to install the socet was easy but after i was done discovered that the base of the old bulb was stuck in the socet keeped it for future use
Other Parts Used:
Oven Bake Element Light Bulb - 40W
  • Jody from Oceanside, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced upper over light and assembly
I had to pull out the oven and balance the oven on two patio tables. Remove the back of the oven. Pull out the light assembly which was burnt. I was unable to remove the casing around the light, so I destroyed it with a pliers. Reinstalling the new light and assembly was easy. What made this job difficult, I could not remove the light assembly from the front of the oven and had to go in from the back.
Other Parts Used:
  • Thomas from SAN DIEGO, CA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original fixture required bulb - this fixture (all-in-one) was great
Pulled range out from cabinet-wall to get to back side, everthing was clearly exposed tlhen. Just a matter of installing new fixture, putting back on, reconnected power source - put range back in proper place.
Other Parts Used:
  • wesley from ODENVILLE, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Be the first to ask our experts a question about this part!

Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744525
Manufacturer Part Number: WP7407P182-60
Brand
Model Number
Description
Magic Chef
2543
Range - GAS RANGE
Magic Chef
3101WPA
Range - Freestanding, Gas
Magic Chef
3101WPW
Range - Freestanding, Gas
Magic Chef
3101WTA
Range - Freestanding, Gas
Magic Chef
3101WTW
Range - Freestanding, Gas
Magic Chef
3121SRA
Range - Gas
Magic Chef
3121SRW
Range - Gas
Magic Chef
3121WPA
Range - Gas
Magic Chef
3121WPV
Range - Gas
Magic Chef
3121WPW
Range - Gas
Magic Chef
3121WRA
Range - Gas
Magic Chef
3121WRV
Range - Gas
Magic Chef
3121WRW
Range - Gas
Magic Chef
3121WTA
Range - Gas
Magic Chef
3121WTV
Range - Gas
Magic Chef
3121WTW
Range - Gas
Magic Chef
3121XPA
Range - Freestanding, Gas
Magic Chef
3121XPS
Range - Freestanding, Gas
Magic Chef
3121XPW
Range - Freestanding, Gas
Magic Chef
3121XRA
Range - Gas
Magic Chef
3121XRA-UX
Range - Gas
Magic Chef
3121XRA-X
Range - Gas
Magic Chef
3121XRS
Range - Gas
Magic Chef
3121XRW
Range - Gas
Magic Chef
3121XRW-UX
Range - Gas
Magic Chef
3121XRW-X
Range - Gas
Magic Chef
3121XTA
Range - Gas
Magic Chef
3121XTS
Range - Gas
Magic Chef
3121XTW
Range - Gas
Magic Chef
3127STA
Range - Freestanding, Gas
Customer Service Representative

Get in touch, we're here to help!

1-866-883-8386 Monday to Saturday
8am - 8pm EST

Contact Customer Service